Panchayat Raj Engineering Department Tender

Dismantling of existing structures like Prestressed / reinforced Cement contrete grade M-20 & above by mechanical means including T&P and scaffolding wherever necessary sorting the dismantled material, disposal of unserviceable materials and stacking the materials with all lifts and lead of 1000 m as per MoRTH specification 202 , 2.4 II (B) (5t) Removal of ceiling plastering

Dismantling of existing structures like Prestressed / reinforced Cement contrete grade M-20 & above by mechanical means including T&P and scaffolding wherever necessary sorting the dismantled material, disposal of unserviceable materials and stacking the materials with all lifts and lead of 1000 m as per MoRTH specification 202 , 2.4 II (B) (5t) Dismantling of exxisting brick work partition

Supply and placing of the M25 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand(unscreened)) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. including overhead charges and contractors profit, but excluding GST and seigniorage charges for RCC Slab 75mm Thick, For Front Side Slab

Supply and placing of the M25 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (fine sand(unscreened)) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. including overhead charges and contractors profit, but excluding GST and seigniorage charges for RCC Slab 75mm Thick, damaged Slab

Providing cladding to facia with Terra cotta tiles of any size approved by Engineer-in-charge over a base coat of CM (1:3) prop. 12mm thick with neat grey cement slurry of honey like consistency spread at the rate of 3.30kgs per sqm and jointed with cement to full depth including cost and conveyance of all materials like cement, sand, water etc., to site excluding seigniorage on materials and labour charges for mixing mortar, laying tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge. Bldg Front side Slab

Suplying and fabricating, erecting and fixing in position trusses of approved design with M S structural elements conforming to IS specifications including roof frame work consisting of rafters,ties struts and purlins including cost of foundations bolts, cleats, bearings plates, etc..complete as per the approved drawing including cost and conveyance of all materials, labour charges for fabricating all structural steel works like heavy steel works like Trusses Stanchions. Heavy Beams and Girders, Labour charges for erecting & fixing all structural steel works like heavy iron grills, Trusses, Stanchions. Heavy Beams and Girders erecting in position and fixing by using chain pulley blocks. Derek pole arrangements and cranes etc., complete in position including cost of welding rods power charges, etc excluding cost of fixing in position and fixing, hire charges of all tools and plants all incidental charges, overheads and contractor profit etc., complete for finished item of work in all floors as directed by the Engineer-in-Charge. Roof Structure

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., , all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) including over head charges & Contractor profit excluding GST.) in All Floors for internal walls. Ground Floor

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., , all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) including over head charges & Contractor profit excluding GST.) in All Floors for internal walls. First Floor

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., , all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) including over head charges & Contractor profit excluding GST.) in All Floors for External walls. Ground Floor

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., , all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) including over head charges & Contractor profit excluding GST.) in All Floors for External walls. First Floor

Applying two coats of Acrylic cementitious Agents on the prepared slab to removing all loose and dead mortar, clened throughly with water (each 1mm) in two coats for excellent resistance adhesion to concrete etc., including brushing the surface to all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and all operational , incidental, labour charges etc., and complete for fininshed item of work.Chemical Treatment

Painting to New wood work with two coats of ready mixed first quality synthetic enamel paint of approved brand and shade over primary coat of wood primer grade I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors (APSS No. 1201 &1208) including over head charges & Contractor profit excluding GST for Doors

Painting to New wood work with two coats of ready mixed first quality synthetic enamel paint of approved brand and shade over primary coat of wood primer grade I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors (APSS No. 1201 &1208) including over head charges & Contractor profit excluding GST. for Windows.

Flooring with vitrified tiles of 1st quality(600 x600 )8mm thich regular finish with normal colours), set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, fine sand(screened), water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. (APSS No.701 & 707)

Supply and fixing of Sal Wood Flush Door of size 1.05 X 2.10mts including fixing of 4 Nos of M.S. Hold fasts, 4 Nos. of 125mm long Mild steel (PC) Butt Hinges, 2 Nos. of 200mm long Alluminium Tower Bolts, 30mm thick solid bond wood block board type with commercial ply on both faces Flush Door shutter and 2 Nos. of 150mm long Alluminium Door Handles, 1No of 300mm long Alluminium Aldrop and 1 No of Door Stopper including cost and conveyance of all materials and labour charges etc., complete

Providing and fixing factory made solidWood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer onall the six surfaces. The door frame will have are bat of 32MM For Toilet Room Doors

Supply and fixing of Medium Teak Wood Flush Door of size 1.20 X 2.10mts including fixing of 4 Nos of M.S. Hold fasts, 4 Nos. of 125mm long Mild steel (PC) Butt Hinges, 2 Nos. of 200mm long Alluminium Tower Bolts, 30mm thick solid bond wood block board type with commercial ply on both faces Flush Door shutter and 2 Nos. of 150mm long Alluminium Door Handles, 1No of 300mm long Alluminium Aldrop and 1 No of Door Stopper including cost and conveyance of all materials and labour charges ,overhead charges and contractors profit.but excluding GST ,, complete.( Door size (1200mm x 2100mm) (Doors in First Floor)

Providing and fixing factory made uPVCwhite colour slidingglazeddoor comprisingof uPVCmultichamberedframewithin-builtrollertrackandsash extruded rofilesdulyreinforced with 1.60 ± 0.2 mmthickgalvanizedmild steel section madefromroll forming process of requiredlength(shape & size according touPVCprofile), appropriatedimensionu PVCextruded glazing beads,uPVCextruded interlock and uPVCextrudedInline sashadaptor(ifrequired), EPDM gasket, wool pile, zincalloy (white powder coated) dlewithkeyononesideofextreme panelsalongwith zinc plated mild steel multipointlocking having transmissiongearwithkeeps, zinc alloy (white powdercoated) cresent lock(ifrequired), stainlesssteel (SS304grade)bodywithadjustable doublenylon rollers(weightbearing capacity to be 120 kg),G.Ifasteners 100x8 mm size for fixing frame tofinishedwall and necessary stainlesssteelscrewsetc. Profileofframe & sashshall be mitred cut and usionweldedatall corners, includingdrillingofholesforfixing hardware's and drainageofwateretc. After fixing frame the gapbtweenframe andadjacent finished wall shall be filled withweatherproof silicon sealent over ackerrodofrequiredsizeandofapprovedquality,allc omplete as per approveddrawing&directionof Engineer-inChargeinclusiveof cost ofSingle / doubleglass panes,wire mesh and siliconsealent. Note: For uPVC frame and sashextruded profiles minus 5%toleranceindimensioni.e.indept Three track three panels sliding door with fly proof S.S wiremesh (Two nos. glazed & one no. wiremesh panels) made of(big series) frame116 x 45 mm& sash 46 x 82 mm both having wallt hickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00sqm upto 5.00sqm

Providing skirting to internal walls to 15 cm height/risers of steps with Vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like stone, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work

Dadooing to walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:3), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand , water, tiles, etc. C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work including over head charges & Contractor profit excluding GST and seinorage charges (APSS No.701 & 707)

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630(Parts 1to15) of any colour and finish in all shades and designs set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work.(APSS No.701 & 707) in All Floors

White washing two coats with whitning/ white cement of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials including over head charges & Contractor profit excluding GST - item no.134 (APSS No.901 & 908)

Providing and applying synthetic plaster putty or equivalent such as Birla wall care putty of average 1 to 2mm thick over plastered surface to prepare the surface even and smooth after throughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emry paper, sand the surface, clean and wipe off loose dust, applying, knifing paste filler by putty knife/ muslin pad, air dry for 2-3 hours, sand with 180 and 320 no. emery paper for the surface preparation including cost and conveyance of all materials to site, all operational, incidental, labour charges, etc,. complete for finished item of work for Internal walls.

Painting to New wood work with two coats of ready mixed first quality synthetic enamel paint of approved brand and shade over primary coat of wood primer grade I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors (APSS No. 1201 &1208) including over head charges & Contractor profit excluding GST.

Supplying and fixing of stainless steel hand railing as per approved drawing with top rail of 64mm dia (outer) 2mm thick pipe, vertical balusters of 50mm dia 2mm thick at 600mm c/c spacing (7 Nos)and 3 nos 25mm dia (outer) 1.6mm thick stainless steel pipes below top rail with equal spacings and 50mm wide 8mm thick SS plate for fixing vertical balusters at 600mm centre with 100x100mm stainless steel base plate to be fixed to the steps with Anchor fasteners. The rate should include providing and using bonding agent, drilling of 25mm holes of fixing railing , polishing of all nos of railing thouroughly and also including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour

Laying and jointing of 110 mm dia. of PVC pipes for septic tank connections including cost and conveyances and labour charges etc.

Supplying and Run of 2 of 36/0.3mm (2.5sq.mm) PVC insulated flexible copper cable(ISI Mark) in existing pipe for mains including cost of all materials and labour charges etc.complete (As per R&B Electrical specifications No.3.1.1) including over head charges & Contractor profit excluding GST.

Wiring with 2 runs of 14/0.3mm (1.0sq.mm) Fire Retardant(FR) PVC insulated flexible copper cable(ISI Mark) in existing pipe with 6A switch,ceiling rose and 3 mm thick hylam sheet covering to switch control box including cost of all materials and labour charges etc.complete for Light,Bell,Fan and exhaust fan points in Non-Residential buildings (As per R&B Electrical specifications No.2.1.1) including over head charges & Contractor profit excluding GST.

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. including over head charges & Contractor profit excluding GST

Supply and fixing of 1x36/40Wbox type tube light luminaire with copper/VPIT choke,condensor, starters etc.and 1No.36/40W tube etc. complete (As per R&B Electrical specifications No.8.2.2) including over head charges & Contractor profit excluding GST

Supplying and fixing of Batten Holder/angle Holder in lieu of ceiling Rose of light point complete with all connections and all labour charges etc.complete (As per R&B Electrical specifications No.2.1.7) including over head charges & Contractor profit excluding GST

Supplying and fixing of 1200 mm [48"] sweep 230 V AC 50 Hz Ceiling Fan with 3 Blades and double bearing and regulator including trasportation and giving connection with twin core wire etc., complete - for 1 No. including over head charges & Contractor profit excluding GST

Supply and Run of 2 of 6 sq.mm WPSC alluminium cable along with No.10 .SWG G.1 wire bearer on both sides through pvc cleats with all accessories including labour charges etc., complete for service mains including over head charges & Contractor profit excluding GST

Providing & Placing on Terrace polyethylene water storage Tank with Double layer approved brand with cover suitable locking arrangements including cost and conveyances and labour charges etc. (2000 Ltrs.- 2 Nos)

Total 37 Items

Total Estimate Contract Value : Rs.

(Rupees Sixty One Lakhs Twenty Eight Thousand Two Hundred and Sixty Two only)