Panchayat Raj Engineering Department Tender

Plain Cement Concrete M25 grade for foundations using coarse aggregate 40mm size hard , machine crushed granite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete, for finished item of work. (APSS No. 402) Bed Concrete for Footings

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations using coarse aggregate 40mm size hard , machine crushed granite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete, for finished item of work. (APSS No. 402) Bed Concrete for flooring

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete, but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Footings

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and including over head charges & contractor profit but excluding GST & Seigniorage charges etc., complete, but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Pedestals

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete, but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Plinth beam

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Columns

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Lintels.

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402, 403 & 903) for Sunshades

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Roof beams

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Roof Slabs 125mm thick

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Waist Slabs 150 mm thick

Masonry work in CM (1:6) proportion (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290 mm x 225 mm x 140 mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504) for Basement

Brick masonry walls in superstructure 230 mm thick with CM (1:8) prop: (Cement : Sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and including over head charges contractor profit but excluding GST & Seigniorage charges etc..complete for finished item of work. (APSS No. 501 & 504) for Super Structure

Providing Thermo Mechanically Treated (TMT) / High Yield Strength Deformed (HYSD) (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit, but excluding GST etc., complete for finished item of work.( APSS No.126)

Ornamental plastering 12mm thick single coat in CM (1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc..complete for finished item of work.(SS 901,903 & 904) for Ceiling

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc..complete for finished item of work .(SS 901,903 & 904) For Buildig Out side walls

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc..complete for finished item of work. (SS 901,903 & 904) for Internal walls

Painting to New walls with two coats of plastic Emulsion Paints Asian / berger/ Nerolac or equavalent quality of approved shade over base coat of cement primer grade 2 making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete but excluding GST for finished item of work in all floors for interrnal Walls .(APSS No. 912)

Painting to New walls with two coats of plastic Emulsion Paints Asian / berger/ Nerolac or equavalent quality of approved shade over base coat of cement primer grade 2 making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete but excluding GST for finished item of work in all floors for External Walls .(APSS No. 912)

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit but excluding GST and seignorage charges etc complete for finished item of work. (APSS No.701 & 707) for all rooms

Providing skirting 10 cm height with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm of any colour and finish in all shades and designs, length equal to flooring tiles, flushed to wall surface to set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit but excluding GST and seignorage chargescomplete for finished item of work.(APSS No.701 &707) for all rooms

Providing dadooing with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge flushed to wall surface set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work for all rooms

Flooring with non-skid red or white full body Ceramic floor tiles of size 300 mm x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and overheads & contractors profit but excluding GST and seignorage charges complete for finished item of work. (APSS No.701 & 707) in Toilets, Anti room and wash area

Supply and fixing of Best Teak wood Door Double shutter fully pannlled door of size 1.50 x 2.10mt with frame made of well seasoned teak wood scantlings of size 125 x 100 mm and shutter made of side rails 125mm X38, top rail 125mmX38mm, bottom rail 125mmX38mm and intermediate rails of 125 x 38 mm and panels - 8 no's are of 25mm thick as per approved design with fixtures of 6 nos of 9" ' z" holdfasts, 300 mm long brass aldrop-1 no,300 long brass latch,125mm long butt hinges 8No's, Door stoppers-2 no, 200mm long Tower bolts - 2no's brass, brass fancy handles 200mm long 2no's, with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete including over heads and contractor profit but excluding GST as per specifications (APSS NO.1001 & 1002).

Supply and fixing of Teak wood Door Double shutter fully pannlled door of size 1.20 x 2.10mt with frame made of well seasoned teak wood scantlings of size 100 x 75mm mm and shutter made of side rails 125mm X38, top rail 125mmX38mm, bottom rail 125mmX38mm and intermediate rails of 125 x 38 mm and panels - 8 no's are of 25mm thick as per approved design with fixtures of 6 nos of 9" ' z" holdfasts, 300 mm long brass aldrop-1 no,300 long brass latch,125mm long butt hinges 8No's, Door stoppers-2 no, 200mm long Tower bolts - 2no's brass, brass fancy handles 200mm long 2no's, with necessary screws complete including cost and conveyance of all materials and labour charges including over heads and contractor profit but excluding GST etc. complete as per specifications (APSS NO.1001 & 1002).

Supply and fixing of Sal Wood Flush Door of size 1.00 X 2.10mts including fixing of 4 Nos of M.S. Hold fasts, 4 Nos. of 125mm long Mild steel (PC) Butt Hinges, 2 Nos. of 200mm long Alluminium Tower Bolts, 30mm thick solid bond wood block board type with commercial ply on both faces Flush Door shutter and 2 Nos. of 150mm long Alluminium Door Handles, 1No of 300mm long Alluminium Aldrop and 1 No of Door Stopper including cost and conveyance of all materials and labour charges including over heads and contractor profit but excluding GST etc., complete (APSS NO.1001 & 1002).

Supply and fixing of Sal Wood Flush Door of size 0.75 X 2.10mts including fixing of 4 Nos of M.S. Hold fasts, 4 Nos. of 125mm long Mild steel (PC) Butt Hinges, 2 Nos. of 200mm long Alluminium Tower Bolts, 30mm thick solid bond wood block board type with commercial ply on both faces Flush Door shutter and 2 Nos. of 150mm long Alluminium Door Handles, 1No of 300mm long Alluminium Aldrop and 1 No of Door Stopper including cost and conveyance of all materials and labour charges etc., including over heads and contractor profit but excluding GST complete (APSS NO.1001 & 1002)

Providing and fixing factory made UPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads, uPVCextruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle onone side of extreme panel along with zinc plated mild steel multi pointlocking having transmission gear with keeps, zinc alloy (white powdercoated) touch lock with hook (if required for wire mesh panel), stainlesssteel (SS 304 grade) body with adjustable double nylon rollers (weightbearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixingframe to finished wall and necessary stainless steel screws etc. Profileof frame & sash shall be mitred cut and fusion welded at all corners,including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shallbe filled with weather proof silicon sealent over backer rod of requiredsize and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Three track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above2.50 sqm upto 4.00 sqm.)including cost and conveyance of all materials including over heads and contractor profit but excluding GST etc.,for finished item of work

Providing and fixing of top hung Ventilators made of pre-painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns thick and section for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to have rebate for glazed shutter with a provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch including over heads and contractors profit but excluding GST etc., complete for finished item of work.

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Columns

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Lintels.

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402, 403 & 903) for Sunshades

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)For Roof beams

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Roof Slabs 125mm thick

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing , including overhead charges & contractors profit, but excluding GST & Seigniorage charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Waist Slabs 150 mm thick

Brick masonry walls in superstructure with CM (1:8) prop: (Cement : Sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and including over head charges contractor profit but excluding GST & Seigniorage charges etc..complete for finished item of work. (APSS No. 501 & 504) for Super Structure

Providing Thermo Mechanically Treated (TMT) / High Yield Strength Deformed (HYSD) (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit, but excluding GST charges etc., complete for finished item of work.( APSS No.126)

Ornamental plastering 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc..complete for finished item of work.(SS 901,903 & 904) for ceiling plastering

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc..complete for finished item of work .(SS 901,903 & 904) For Buildig Out side walls

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc..complete for finished item of work. (SS 901,903 & 904) for Internal walls

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing admixture confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 100ml per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc..complete for finished item of work. (APSS No. 901 & 903) over Roof Slabs

Painting to New walls with two coats of plastic Emulsion Paints Asian / berger/ Nerolac or equavalent quality of approved shade over base coat of cement primer grade 2 making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., inclduing over heads and contractors profit but excluding GST etc., complete for finished item of work in all floors for internal Walls

Painting to New walls with two coats of plastic Emulsion Paints Asian / berger/ Nerolac or equavalent quality of approved shade over base coat of cement primer grade 2 making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc.inclduing over heads and contractors profit but excluding GST etc., complete, complete for finished item of work in all floors for External Walls

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit but excluding GST and seignorage charges etc., complete for finished item of work. (APSS No.701 & 707) for all rooms.

Providing skirting /Daddoing to internal walls to 15 cm height with ceramic tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm of any colour and finish in all shades and designs, length equal to flooring tiles, flushed to wall surface to set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit complete for finished item of work.(APSS No.701 &707) for all rooms

Providing dadooing with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge flushed to wall surface set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit but excluding GST and seignorage charges etc. complete for finished item of work for all rooms

Providing dadooing with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge flushed to wall surface set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and including overheads & contractors profit but excluding GST and seignorage charges etc.complete for finished item of work. in Toilets, Anti Room & wash area.

Supply and fixing of Best Teak wood Door Double shutter fully pannlled door of size 1.50 x 2.10mt with frame made of well seasoned teak wood scantlings of size 125 x 100 mm and shutter made of side rails 125mm X38, top rail 125mmX38mm, bottom rail 125mmX38mm and intermediate rails of 125 x 38 mm and panels - 8 no's are of 25mm thick as per approved design with fixtures of 6 nos of 9" ' z" holdfasts, 300 mm long brass aldrop-1 no,300 long brass latch,125mm long butt hinges 8No's, Door stoppers-2 no, 200mm long Tower bolts - 2no's brass, brass fancy handles 200mm long 2no's, with necessary screws complete including cost and conveyance of all materials and labour charges but excluding GST etc. complete as per specifications (APSS NO.1001 & 1002).

Supply and fixing of Teak wood Door Double shutter fully pannlled door of size 1.20 x 2.10mt with frame made of well seasoned teak wood scantlings of size 100 x 75mm mm and shutter made of side rails 125mm X38, top rail 125mmX38mm, bottom rail 125mmX38mm and intermediate rails of 125 x 38 mm and panels - 8 no's are of 25mm thick as per approved design with fixtures of 6 nos of 9" ' z" holdfasts, 300 mm long brass aldrop-1 no,300 long brass latch,125mm long butt hinges 8No's, Door stoppers-2 no, 200mm long Tower bolts - 2no's brass, brass fancy handles 200mm long 2no's, with necessary screws complete including cost and conveyance of all materials and labour charges etc. including overheads & contractors profit but excluding GST complete as per specifications (APSS NO.1001 & 1002).

Supply and fixing of Sal Wood Flush Door of size 1.00 X 2.10mts including fixing of 4 Nos of M.S. Hold fasts, 4 Nos. of 125mm long Mild steel (PC) Butt Hinges, 2 Nos. of 200mm long Alluminium Tower Bolts, 30mm thick solid bond wood block board type with commercial ply on both faces Flush Door shutter and 2 Nos. of 150mm long Alluminium Door Handles, 1No of 300mm long Alluminium Aldrop and 1 No of Door Stopper including cost and conveyance of all materials and labour charges etc., including overheads & contractors profit but excluding GST complete (APSS NO.1001 & 1002).

Supply and fixing of Sal Wood Flush Door of size 0.75 X 2.10mts including fixing of 4 Nos of M.S. Hold fasts, 4 Nos. of 125mm long Mild steel (PC) Butt Hinges, 2 Nos. of 200mm long Alluminium Tower Bolts, 30mm thick solid bond wood block board type with commercial ply on both faces Flush Door shutter and 2 Nos. of 150mm long Alluminium Door Handles, 1No of 300mm long Alluminium Aldrop and 1 No of Door Stopper including cost and conveyance of all materials and labour charges etc., including overheads & contractors profit but excluding GST complete (APSS NO.1001 & 1002)

Providing and fixing factory made UPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads, uPVCextruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle onone side of extreme panel along with zinc plated mild steel multi pointlocking having transmission gear with keeps, zinc alloy (white powdercoated) touch lock with hook (if required for wire mesh panel), stainlesssteel (SS 304 grade) body with adjustable double nylon rollers (weightbearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixingframe to finished wall and necessary stainless steel screws etc. Profileof frame & sash shall be mitred cut and fusion welded at all corners,including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shallbe filled with weather proof silicon sealent over backer rod of requiredsize and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Three track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above2.50 sqm upto 4.00 sqm.) including cost and conveyance of all materials,labour charges but excluding GST etc. complete

Providing and fixing of top hung Ventilators made of pre-painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns thick and section for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to have rebate for glazed shutter with a provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work including cost and conveyance of all materials,labour charges but excluding GST etc. complete

Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit, but excluding GST charges etc., complete for finished item of work

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) including cost and conveyance of all materials and labour charges , overheads & contractors profit, but excluding GST charges etc., complete for 75 MM dia.

Labour charges for laying, fixing and commissioning the PVC pipes Including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice including cost and conveyance of all materials and labour charges , overheads & contractors profit, but excluding GST charges etc., complete for finished item of work 75mm dia.

Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality confirming to IS:2556-Part-4:1972 with waste fittings like rubbe plug, chain, 32mm nominal size C.P. Fitting with parallel pipe thread confirming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior / Nice / Esso or equivalent complete with standard CI brackets including wooden block: including cost of 50mm dia pvc pipe, 12.7mm PVC connection with brass union nut C.P. coated and concealed stop cock 12.7 mm (1/2") etc complete for 550 x 400 mm - Single C.P Pillar cock including Cost and and conveyance of all materials and labour charges including over heads and contractor's profit but excluding GST charges etc., complete for for finished item of work

Supplyind and laying, jointing and testing 101.60mm SWG SP-1 pipes of ISI make confirming to ISI 651 & 4127 with air tight cement joints in cm (1 1/2:1) prop, including excavation of trenches and socket pits in any soils (except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling watering and tamping including cost and conveyance of all materials and labour charges , overheads & contractors profit, but excluding GST charges etc. complete for finished item of work

Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 15mm PVC connection with brass plumber union nuts CP coated, 15 mm brass body CP finish self closing tap push type conforming to IS 1711, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials and labour charges , overheads & contractors profit, but excluding GST charges etc., complete for finished item of work for all floors

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make including cost and conveyance of all materials and labour charges , overheads & contractors profit, but excluding GST charges etc., complete for finished item of work in all respects: Coloured - Grade - I/ Grade - II

Supply and fixing bib cock cum health faucet with 1 m long flexible tube and wall hook of Jaquar make queen series with 7 years warrenty Chrome plated / Jupiter Aqua Lines-JAL-make Nira or equivalent series including cost and conveyance of all materials and labour charges , overheads & contractors profit, but excluding GST charges etc., complete

Supply and Transportation of 1 HP 10 Stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft motor suitable for working on 240V ± 10%, single phase 50 Hz AC supply, including cost and conveyance of all materials and labour charges , overheads & contractors profit, but excluding GST charges etc., complete for 4" Bore well. Makes: As per list of recommended brands as category I

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., and including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)

Quarry Rubbish filling in foundation / basement from approved Quarry / available sources including all operational, incidenal, labour charges, Hire Charges of T&P etc., complete (excluding rock) in trenches, including cost and cost and conveyance of all materials and labour charges, sales and other taxes etc, including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete (APSS NO. 309 & 310)

40 mm size HBG metal filling in foundation / basement from approved Quarry / available sources including all operational, incidenal, labour charges, Hire Charges of T&P etc., complete (excluding rock) in trenches, including cost and cost and conveyance of all materials and labour charges, sales and other taxes etc, including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete (APSS NO. 309 & 310)

20 mm size HBG metal filling in foundation / basement from approved Quarry / available sources including all operational, incidenal, labour charges, Hire Charges of T&P etc., complete (excluding rock) in trenches, including cost and cost and conveyance of all materials and labour charges, sales and other taxes etc, including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete (APSS NO. 309 & 310)

10 mm size HBG metal filling in foundation / basement from approved Quarry / available sources including all operational, incidenal, labour charges, Hire Charges of T&P etc., complete (excluding rock) in trenches, including cost and cost and conveyance of all materials and labour charges, sales and other taxes etc, including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete (APSS NO. 309 & 310)

Sand filling in foundation / basement from approved Quarry / available sources including all operational, incidenal, labour charges, Hire Charges of T&P etc., complete (excluding rock) in trenches, including cost and cost and conveyance of all materials and labour charges, sales and other taxes etc, including over head charges & contractor profit, but excluding GST & Seigniorage charges etc., complete (APSS NO. 309 & 310)

Providing 110 mm Dia ISI marked PVC down water take pipes with single socket , 2.5mm thick 4.0 kg/sq.cm pressure of ISI marked including cost of necessary PVC Bends, couplers, shoes, iron / PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, operational & incidental charges including all labour charges for fixing at site etc., and including over head charges & contractor profit, but excluding GST charges etc., complete for finished item of work. (APSS No. 1328)

Supply and Fixing of 25mm outer dia medium grade (2.2 mm thick) confirms to IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) flame retundant smoke cables concealed in Roof Slabs with all required MS junction boxes and all accessories including masonary work for light, fan, and separate plug point with hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges and including over head charges & contractor profit, but excluding GST charges etc., complete Makes : Precision/Universal & Marudhar/ VIP /GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin/Vasavi/DEC

Supply and Fixing of 25mm outer dia medium grade (1.8 mm thick) confirms to IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required MS junction boxes and all accessories including masonary work for light, bell, fan, and separate plug point with hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges and including over head charges & contractor profit, but excluding GST charges etc., complete Makes : Precision/Universal & Marudhar/ VIP /GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin/Vasavi/DEC

Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) FRLS /HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable(Phase, Neutral & Earth) in existing pipe with 6A 1 way modular switch, Ceiling rose and 6 modular cover frame covering to 6 modular G.I Box including all labour charges and including over head charges & contractor profit, but excluding GST charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. Makes: Finolex/RR kabel/Havells/Finecab/KEI/Polycab/Gloster/ Goldmedal /GM/ Fortune Arrt/Anchor /Million/ APAR(Anushakthi).

Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FRLS /HFFR PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges and including over head charges & contractor profit, but excluding GST charges etc., complete. Makes: Finolex / RR kabel /Havells/ Finecab/KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/Anchor /Million/ APAR(Anushakthi)

Supply and run of 2 of 56/0.3mm (4.0 Sqmm) FRLS /HFFR PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges and including over head charges & contractor profit, but excluding GST charges etc., complete. Makes: Finolex / RR kabel /Havells/ Finecab/KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/Anchor /Million/ APAR(Anushakthi)

Supply and transportation of following XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I including cost and conveyance of all materials and labour charges and including over head charges & contractor profit, but excluding GST charges etc., complete. Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt .120 Sqmm x 3.50 core

Earth work excavation of Trench in hard ground soil, laying of U.G cables from 70 sqmm to 400 Sq,mm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges and including over head charges & contractor profit, but excluding GST charges etc., complete.

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size 1.5 x 0.6 x 0.9 m, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges and including over head charges & contractor profit, but excluding GST charges etc., complete for small quarters.

Supply of 48" (1200mm) Sweep 5 Star rated Ceiling Fan without Regulator with all standard accessories including cost and conveyance of materials and labour charges and including over head charges & contractor profit, but excluding GST charges etc., complete of Makes: Crompton (HS Plus/HS) / Havells (ES PLUS/ SS390ES) /Orient Energy Star/Halonix(Zephyr)/Polycab (Synergy 50 ISI) / G.M. (Air Wave Premium)/Bajaj-Edge/ Arcline (Glacier)

Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire Makes: Finolex / Polycab / Havells / V-Guard / Gold Medal / GM / Million / Vimal /Airson/CRI/ Tamra/ ollvin/Avocab etc., complete including cost and conveyance of all materials and labour charges and including over head charges & contractor profit, but excluding GST charges etc., complete

Supply of fresh air exhaust fan of light duty 250V A.C.50Hz.. 225 mm (9") / 300mm size (12") 1350 R.P.M fan with wire guard etc., complete. of Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DSP / Orient hill air/Halonix /Polycab/G.M. (Xenix)/ Goldmedal (Rapido-12) and fixing of Exhaust fan in wall with necessary connections with twin core wire Makes: Finolex / Polycab / Havells / V-Guard / Gold Medal / GM / Million / Vimal /Airson/CRI/ Tamra/ ollvin/Avocab and masonary work of making hole, finishing etc., complete including cost and conveyance of all materials and labour charges and including over head charges & contractor profit, but excluding GST charges etc., complete.

Supply and fixing of 18W/20W, 1200mm length LED batten light with extruded alluminium housing andbatten light with extruded alluminium housing and batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Voltswith PF0.9, Surge protection: 2KV,THD15%, withinbuilt driver and frosted cover CCT: 3000K - 5700K,minimum CRI70, .etc., complete including cost and conveyance of materials and labour charges and including over head charges & contractor profit, but excluding GST charges etc., complete. Makes: Surya/C&S/Fortune Arrt/Syska/Enrich/ Stanjo/Polycab/Ib LED/Opple/Luker/Orbit/Trinic/Lumens/ GLO LED / Vimal/Benlo/Goldwyn b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / EVERLIGHT

Supply, transportation and fixing of of 150W LED HIgh Bay Luminaire with high power COB LED made of pressure diecast alluminium housing with powder coated,Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's having efficacy 120 lumines/watt, System efficacy 95lm/W and junction temprature 70°C, with Ingrees protection IP65, IK05, Driver surge protection 4KV, external Surge protection ≥ 5KV with wide/ Narrow beam optics, THD10% at 110 Volts AC, driver efficiency 90%, , CCT: 3000K - 5700K, minimum CRI70, etc., complete including cost and conveyance of materials and labour charges and including over head charges & contractor profit, but excluding GST charges etc., complete CATEGORY- I LUMINAIRE MAKE : Wipro / Philips/ GE-Venture /Crompton/Bajaj/Greenlites/Havells/Capart(Premium)/Halonix/ Polycab /Keselec/ HPL/ Jaquar/Eveready /Surya (ORION-II)/ FortuneArrt (UFO-S) /Rhino(GPHB02 Series).

Supply of LED Lamp with input voltage 90 to 300V, Color temperature3000k - 6500k, Beam angle 170 - 220 degrees, B22 base including cost and conveyance of materials and labour charges and including over head charges & contractor profit, but excluding GST charges etc., complete.Makes:Phillips/Crompton/Bajaj/Havells/ Halonix/GM/HPLSyska /Green Lites /FortuneArrt/ GoldMedal/ Luker /Leo/Orbit /Rhino/GLO LED/Million/Victoria/Benlo/ Goldwyn.

Supply of 1.50 T.INVERTER Model Cool type split AC unit with high wallmounted Single Split indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidigation including cost and conveyance of materials and labour charges and including over head charges & contractor profit, but excluding GST charges etc., complete CATEGORY- II Makes:Blue Star/Daikin/Hitachi/Carrier/LG/ Lloyd (prevailing models in the market)

Supply, Installation, Testing and Commissioning of Electric Traction Passenger Lift of Makes: As per list of recommended brands. with • Rated capacity :- 10 Passenger/680Kg • Floors :- G+1 floor (2Stops/2 Landings) • Travel :- 3 to 4.2 mtrs • Location of Lift Machine:- MRL • Rated speed :- 1.0/1.25mps VS • Doors type :- COPO/TOPO Doors with frame having clear opening of 800 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames • Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. Makes:Kone/Otis/Schindler/ Mitsubishi/Johnson/Thyss enKrupp • COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Telugu & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor.Clear Car size of ......mm wide x mm deep x......mm high • LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings • Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/ control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class • ARD complete with necessary SMF VRLA batteries • Fireman controller having fireman switch at fire Landing. • Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. • Other mechanical parts such as 'T' section adequate size guiderails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work • Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. • Lift shaft available having clear size of ......mm wide x ......mm deep , ......mm Pit depth, , ………mm Overhead.