Panchayat Raj Engineering Department Tender

RWS S;Cost and supply and fixing of 180mm dia PVC end cap and bottom dummy (including contractor profit @ 13.615%)

RWS S;Labour charges for Slotter cutting to 180mm dia 6kg/cm2 PVC casing pipe (including contractor profit @ 13.615%)

RWS S;Survey & Investigation charges payable to Geologist for identifying sustainable source including hiring of zeep for conducting survey, engaging man mazdoor for helping during survey, fuel charges, crew charges etc., complete (including contractor profit @ 13.615%)

RWS S;Supply and Transportation of 5.00 HP 5 Star rated Submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well. - 5.00HP, 5-10Stage - ELEC-5.4.5 (b) Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/Aryen Varsha (including contractor profit @ 13.615%)

RWS S;Fabrication, Transportation and suplly of wall mounted Control Panel board of size 600x600x250 mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated, painted with two coats of Redoxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc, complete consisting of the following equipment with all internal wiring using L&T/ Finolex copper FRLS cables of suitable size and capacity and cable clamp etc, complete for 3 phase motor pumpsets - ELEC - 5.4.17 (b) (1)Voltmeter: 0-500 V 96x96 mm size makes : L&T / S&S/ SALZAR/HPL/AEI/Meco/Rishab - 1No (2) Single Phase Preventor of suitable range makes : L&T /Minilec/ Powertech - 1 No (3) 0to 20 Amps/ 0.50 Amps Ammeter (96x96mm size) Makes:L&T / C&S/SALZAR/HPL/AEI/Meco/Rishab - 1 No (4).32 A TP, 10 KA MCB Makes: Legrand/ Schneider - 1 No. indication lamps (R-Y-B) with switch control - 1 Set voltmeter & Ammeter selector switch - 2 Nos. Supply and fixing of ISI Mark suitable capacitor makes: L&T / Siemens/Schneider/ PCos/Havells upto 12.00 HP with DOL Starter of Make C&S Crompton/ L&T/Siemens/BCH (including contractor profit @ 13.615%)

RWS S;Cost and supply of 63 mm dia HDPE Pipe 10kg/cm2 (including contractor profit @ 13.615%)

RWS S;Cost and supply of 50mm dia SS Nipples (including contractor profit @ 13.615%)

RWS S;Cost and supply of 50mm dia GI pipe "B" class

RWS S;Cost and supply of 50mm dia GI heavy Couplings (including contractor profit @ 13.615%)

RWS S;Cost and supply of 50mm dia GI Bends (including contractor profit @ 13.615%)

RWS S;Cost and supply of 50mm dia Non return valve (including contractor profit @ 13.615%)

RWS S;Cost and supply of 50mm dia MS Flangeset (including contractor profit @ 13.615%)

RWS S;Cost and supply of 50mm dia MS Clampset (including contractor profit @ 13.615%)

RWS S;Cost and supply of 7/16 service wire (including contractor profit @ 13.615%)

RWS S;Cost and supply of 2.50Sqmm 3 Core Flat type cable (including contractor profit @ 13.615%)

RWS S;Cost and supply of 180mm dia PVC Bore cover/ cap (including contractor profit @ 13.615%)

RWS S;Cost and supply of 63mm dia PVC FTA (including contractor profit @ 13.615%)

RWS S;Labour charges for fixing of 5.00 HP/3 Phase Borewell submersible pumpset with all accessories (including contractor profit @ 13.615%)

RWS S;Earth work excavation by 2/3 machinery and 1/3 manually and depositing on bank with an intial lead and lift in loamy and clayee soils for pipeline trench of size 0.70x 1.00 m including setting out, bracing, removal of stumps and other deleterious material and disposal upto a lead of 50M, dressing of sides and bottom, lowering, laying and jointing of 75 mm dia 6kg/cm2 PVC pipes with necessary jointing materials, testing the pipe line to the standard water pressure and refilling the trench with excavated soils to the original surface level etc., complete including Over heads & Contractors profit at 13.615%

RWS S;Cost and supply of 75 mm dia 6 kg/cm2 PVC casing pipe including all charges etc., completed (including Contractor profit @ 13.615%)

RWS S;Earth work excavation by manually and depositing on bank with an intial lead and lift in loamy and clayee soils for pipeline trench of size 0.70x 1.00 m including setting out, bracing, removal of stumps and other deleterious material and disposal upto a lead of 50M, dressing of sides and bottom, lowering, laying and jointing of 75mm dia 4kg/cm2 PVC pipes with necessary jointing materials, testing the pipe line to the standard water pressure and refilling the trench with excavated soils to the original surface level etc., complete including Over heads & Contractors profit at 13.615%

RWS S;Manufacture, Supply & Delivery of PVC 75mm dia 4kg/cm2 PVC pipes for Potable water supplies confirming to IS 4985/2000 (3rd Rev) with Bell ends (socket) as per specifications in light grey / Natural ivory grey / any other Colour (except white) inclusive of transportation, excluding GST (including Contractor profit @ 13.615%)

RWS S;Providing House hold connections from nearest distribution line - 6 Nos. Providing House hold service connection from nearest distributions line using following items 1..Earth work excavation for structures -- 0.70 Cum 2. 75mm dia PVC Service Saddles ---1.00 Nos. 3. CPVC Pipe of 22.20 mm OD Pipe ----- 2.00 Rm 4. 25mmx1/2" PPR Female Threaded elbow- 1.00 Nos 5.20mm dia GI B-Class Pipes - 0.90Rm 6. 20mm dia GI Elbows -1.00 Nos 7. 20mm dia GI couplings - 1.00 No. 8.20mm dia GI Nipple - 0.30m - 1.00 No 9.20mm dia CI waste not tap - 1.00 Nos 10.20mm dia GM Ferrule - 1.00 Nos 11.600 mm dia RCC Precasted rings - 1.00 Nos 12.labour charges for fixing taps with GI pipes specials for house hold connections - 1.00 No (including contractor profit @ 13.615%) - 1.00Nos