Panchayat Raj Engineering Department Tender

Construction of10 KL GLSR in the site slected by the Department with vibrated reinforced cement concrete M-30 grade as per the approved type design and specifications and directions of the deparmental offiers and as per specificationof original agment including earth work excavation in all types of soils except rock requiring blasting in wet or dry conditions including cost and conveyance of all materails and labour charges including GI ladder, fly roof ventilator, 65mm B cl GI pipe, GM valves 65mm dia and cost of steel and its fabrication charges, contactor profit etc and excluding GST etc complete for finished item of work

Construction of pipeline for water supply with 63mm dia, 6kg/cm2 HDPE PE-100 grade Pipes as per IS: 4984-1995 with its ammendments and revisions thereon including cost and supply of pipes, lowering, laying and jointing of Pipe lines true to alignment and gradient, trench excavation manually for pipe lines in all types of soils and refilling trenches with excavated earth except rock requiring blasting (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work, filling pipeline with water and testing to hydraulic field test pressure including all labour charges laying and jointing as per the directions of the departmental officers and as per the technical specifications of 17 (Part-B of Vol-I) but excluding GST and CED for finished item of pipeline' 63 mm dia HDPE 6 Kg/sqcm ((manually) trench size 0.5x0.75m for Distribution Main

Supply and fixing of Nominal Bore GI pipe Medium grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges etc complete for pumping main Including contractor Profit @13.615% etc but excluding GST etc complete. 50 mm nominal bore GI pipe. 65 mm Nominal bore GI Pipe

Supply and fixing of Nominal Bore GI pipe Medium grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges etc complete for pumping main Including contractor Profit @13.615% etc but excluding GST etc complete. 50 mm nominal bore GI pipe. 65 mm Nominal bore GI Pipe

Supply and delivery of "Resllent seated soft sealing" Gate Valves (Sluice valves) with Body and bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50-500/7 or equlvalent as per IS:3896-2 and wedge fully Rubber lined with food grade 3-0 ring protection system on the Shaft and seals of NBR. The valves should be vacuum tight and 100% leak proof with face to face dimensions as per BS:5163 type A/IS:14846, All the valves should be with fusion bonded Elecrostatic poweder coating A Flange drilling as per IS:1538, contruction of RCC valve chambers as per conplete for finished item of work. The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of work, but excluding GST and seignourage cahrges as specified in Technical specification including contractor, 80mm Sluice valve with OUT VC

Construction of Functional House Hold Tap Connections (FHTC) with PP Clamp Saddle ,Non return cum Flow control valve of 15 mm dia designed for 5 LPM discharge @0.5 bar pressure loss,Compression male/female threaded,cost and supply of 20 mm dia HDPE 16.0 Kg/cm2 (for a length of 3.0 Mts)with laying,jointing,trench excavation up to 0.5 Mts depth including testing,refilling,cost & supply of 15 mm dia GI pipe Medium grade ( for a length of 1.40 Mts) with necessary fittings,supply&fixing of 12.7 mm brass bib cock(long body) indian make heavy duty for finished item of work including cost,conveyance of all materials,labour charges etc with relevent IS codes,by using with food grade material suitable for usage in drinking water system to the extent of departmental satisfaction including Over heads and Contractor Profit@13.615% but excluding GST and Seignorage charges.