Panchayat Raj Engineering Department Tender

Providing FHTCs;Providing Household Tap Connection using 15mm dia UPVC Pipe (SCHD 40) and 15mm GI Pipe as Standpost including labour charges for Earth work excavation and fixing of tap connections and cost of all specials etc.,complete but excluding cost of UPVC Pipe- on on Exisitng 90mm dia pipeline

Providing FHTCs;Providing flow control valves on Exisitng FHTC's including labour charges for Earth work excavation and fixing of tap connections and cost of all specials etc.,complete but excluding cost of UPVC Pipe .including cotractor profit 13.615% but excluding GST.

Providing FHTCs;Provision for CC Road Cutting using air compressor 7cmm (electrical) including cotractor profit 13.615% but excluding GST.

Providing FHTCs;Cement concrete(1:2:4) prop using 20mm gauge HG metal including cost and conveyanceof all materials and labour charges ,seign. charges etc.complete.-for FHTC Platforms

Providing FHTCs;Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe / 175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burried channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebullied pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, clamps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per ISI specification used for rotary tube well. The pebbled gravel packing should be carried out in such a way that the theoritical quantity consumed completely. The rate including cotractor profit 13.615%.

Providing FHTCs;Cost and Supply of 175 mm dia PVC blue casing pipe 6kgf for casing including cost and conveyence of all materials and labour charges etc., complete and conveyance to work site the rate including cotractor profit 13.615% but excluding GST.

Providing FHTCs;Slotting charges to 175 mm dia casing pipe PVC pipe including cost and conveyence of all materiels and labour charges etc., complete the rate including cotractor profit 13.615% but excluding GST.

Providing FHTCs;Cost and supply of 180 mm MS Clamp set the rate including cotractor profit 13.615% but excluding GST.

Providing FHTCs;Cost and supply of 180 mm dia borecap including cotractor profit 13.615% but excluding GST.

Providing FHTCs;Cost and supply of 50 mm dia ss Nippals including cotractor profit 13.615% but excluding GST.

Providing FHTCs;Cost and supply of 63 mm dia HDPE pipe (10 kg/cm2) including cotractor profit 13.615% but excluding GST.

Providing FHTCs;Cost and supply of 7/16 pvc insulated wire including cotractor profit 13.615% but excluding GST.

Providing FHTCs;Cost and supply of 63amps fuge carriers including cotractor profit 13.615% but excluding GST.

Providing FHTCs;Cost and supply of 7.50HP /12-16 stage three phase Submersible pumpset and including cotractor profit 13.615% but excluding GST.

Providing FHTCs;Cost and supply of 2.50 sq mm flat cable wire including cotractor profit 13.615% but excluding GST.

Providing FHTCs;Supply and Transportation of control panel for single phase submersible motors up to 7.50 HP @ 220V 50Hz operating range between 80 to 240V including supply and fixing of Direct - on - Line of approved make Volt meter and Ammeter with starting and running capacitors assembled with ISI mark contactors and fitted with Legrand make etc., complete. including cotractor profit 13.615% but excluding GST.

Providing FHTCs;Labour charges for errection of 7.50 HP motor submersible pumpset into newly drilled borewell