Panchayat Raj Engineering Department Tender

Plain Cement Concrete to (1:5:10 proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG (SS5) metal from from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work for Columns footings including Over Head Charges, Contractor Profit @ 13.615%

Brick masonry with CM (1:6) proportion using II nd class country bricks of size 23x11x7 cm from approved source having crushing strength not less than 35kg/sqcm including cost and conveyance of all materialslike cement ,sand ,bricks, water etc., to site , including seignorage charges ,sales and other taxes on all materials and all operational ,incidental and labour charges such as mixing cement mortar, curing scafolding charges, constructing masonary,lift charges,curing etc., complete for finished item of work including Over Head Charges, Contractor Profit @ 13.615%

Plastering with CM (1:5), 20 mm thick including cost and conveyance of all materials like cement, sand, water, etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work including Overheads & Contractors Profit @ 13.615%

Flooring with Ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work including contractoes profit and overhead Charges @ 13.615%

Supply an Fixing of Mosquito Mesh to Windows with MediumTeak Wood Reapers and S.S. Fly Proof Mesh including cost and conveyance of all materials and labour charges etc., complete. including Municipal Allowances on Labour and Contrctors Profit & Over Head Charges @ 13.615%

Supply and fixing of MS Rafters and purlins for Roof support etc complete including Over Head Charges & Contractor Profiit @ 13.615%.

Roofing will be provided with 0.5mm thick galvanized/ prepainted with 0.5mm thick galvanized/ prepainted G.I. profiled sheets fixed to the purlins with14size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws.End laps are to be sealed with25x3mm Butyltape. The sheets are provided with anticapillary grove

Providing Electrification

Supply & Fixing of 1200mm (48") sweep 230V, A.C 50 Hz. ceiling fan with 3 blades and double ball bearings with all standard accessories including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge including Over Head Charges, Contractor Profit @ 13.615% .

Labour charges for fixing of ceiling fan etc., complete as directed by Engineer in Charge including Over Head Charges, Contractor Profit @ 13.615% .

Supply and errecting 600W Electronic stepped type regulators for Ceiling fans complete including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete including Over Head Charges, Contractor Profit @ 13.615% .

Supply and fixing of 20W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's System efficacy 100lm/W and junction temprature 70°C, with Ingrees protection IP65, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection ≥ 10KV with optics distribution , THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70 with 1.0 Mtr., 25mm dia GI pipe bracket and anti tilting MS flat etc., complete.including Municipal Allowances on Labour charges and Contrctors Profit & Over Head Charges @ 13.615%.

Supply and Transportation of 1HP Single phase Mono block CI body motor pumpset confirms to IS 9079:2002 Makes: As per list of recommended brands as category I.

Providing Sanitation and Water supply

Supplying and fixing of 12.7 mm N.P bib tap Indian make 3heavy duty sort body first quality Indian make including cost and conveyance of all materials and labour charges etc., complete including Over Head Charges & Contractor Profiit @ 13.615%.

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for including labour charges etc complete.including Over Head Charges & Contractor Profiit @ 13.615%.

Suppllying and fixing Prince/Sudhakar or equivalent ISI make PVC SWR grade Pipes of type B class and specials like bends, Tee, Y-junction with or without door, Vent cowl, providing and fixing cleaning / rodding eye with endcap wherever required, etc., cutting the pipes, laying or fixing to perfect plumb, with slopes where required, making joints using solvent cement solution or with ring seal couplers of size available pipe of 110mm and 75mm dia., providing 110 dia PVC make up piece with inlet connections, providing and fixing G.I. U clamps to the brackets, Providing and removing necessary scaffolding where required, providing supports for pipes laid in false ceiling using G.I.hangers fixed to R.C.C slab including providing and fixing necessary anchor fastners and clamps, conducting water test for leak proof joints and the materials, etc., complete. including Overheads & Contractors Profit @ 13.615%.110mm dia 4kg/ sq.cm single socket upvc waste pipe

Supplying and fixing of 110 mmdia bend PVC 87.5 including cost and conveyance of all materials and labour charges etc., complete including Over Head Charges & Contractor Profiit @ 13.615%.

Suppllying and fixing Prince/Sudhakar or equivalent ISI make PVC SWR grade Pipes of type B class and specials like bends, Tee, Y-junction with or without door, Vent cowl, providing and fixing cleaning / rodding eye with endcap wherever required, etc., cutting the pipes, laying or fixing to perfect plumb, with slopes where required, making joints using solvent cement solution or with ring seal couplers of size available pipe of 110mm and 75mm dia., providing 110 dia PVC make up piece with inlet connections, providing and fixing G.I. U clamps to the brackets, Providing and removing necessary scaffolding where required, providing supports for pipes laid in false ceiling using G.I.hangers fixed to R.C.C slab including providing and fixing necessary anchor fastners and clamps, conducting water test for leak proof joints and the materials, etc., complete. including Overheads & Contractors Profit @ 13.615%.90mm dia 4kg/ sq.cm single socket upvc waste pipe

Supplying and fixing of 90 mmdia bend PVC 87.5 including cost and conveyance of all materials and labour charges etc., complete including Over Head Charges & Contractor Profiit @ 13.615%.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) including Over Head Charges & Contractor Profiit @ 13.615%. For 15.90mm ODPipe - SDR 11.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) including Over Head Charges & Contractor Profiit @ 13.615%. For 22.20mm ODPipe - SDR 11.

Providing & fixing GM gate / ball valve of 32 mm dia as per IS -778 Class - I, Indian make heavy type, including cost & conveyance of all material to work spot and all labour charges including fixing in position for finished item of work and all taxes. including Overheads & Contractors Profit @ 13.615%.25mm Nominal bore

No.of items (24) Twenty four only