Panchayat Raj Engineering Department Tender

RWSS;Survey & Investigation charges payable to Geologist for identifying sustainable source including hiring of zeep for conducting survey, engaging man mazdoor for helping during survey, fuel charges, crew charges etc., complete (including contractor profit @ 13.615%)

RWSS;Supply and Transportation of 5.00 HP 5 Star rated Submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well. - 5.00HP, 5-10Stage - ELEC-5.4.5 (b) Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/Aryen Varsha (including contractor profit @ 13.615%)

RWSS;Fabrication, Transportation and suplly of wall mounted Control Panel board of size 600x600x250 mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated, painted with two coats of Redoxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc, complete consisting of the following equipment with all internal wiring using L&T/ Finolex copper FRLS cables of suitable size and capacity and cable clamp etc, complete for 3 phase motor pumpsets - ELEC - 5.4.17 (b) (1)Voltmeter: 0-500 V 96x96 mm size makes : L&T / S&S/ SALZAR/HPL/AEI/Meco/Rishab - 1No (2) Single Phase Preventor of suitable range makes : L&T /Minilec/ Powertech - 1 No (3) 0to 20 Amps/ 0.50 Amps Ammeter (96x96mm size) Makes:L&T / C&S/SALZAR/HPL/AEI/Meco/Rishab - 1 No (4).32 A TP, 10 KA MCB Makes: Legrand/ Schneider - 1 No. indication lamps (R-Y-B) with switch control - 1 Set voltmeter & Ammeter selector switch - 2 Nos. Supply and fixing of ISI Mark suitable capacitor makes: L&T / Siemens/Schneider/ PCos/Havells upto 12.00 HP with DOL Starter of Make C&S Crompton/ L&T/Siemens/BCH (including contractor profit @ 13.615%)

RWSS;Cost and supply of 50mm dia GI pipe "B" class

RWSS;Cost and supply of 50mm dia GI heavy Couplings (including contractor profit @ 13.615%)

RWSS;Cost and supply of 50mm dia GI Bends (including contractor profit @ 13.615%)

RWSS;Cost and supply of 50mm dia Non return valve (including contractor profit @ 13.615%)

RWSS;Cost and supply of 50mm dia MS Flangeset (including contractor profit @ 13.615%)

RWSS;Cost and supply of 50mm dia MS Clampset (including contractor profit @ 13.615%)

RWSS;Cost and supply of 7/16 service wire (including contractor profit @ 13.615%)

RWSS;Cost and supply of 2.50Sqmm 3 Core Flat type cable (including contractor profit @ 13.615%)

RWSS;Cost and supply of 180mm dia PVC Bore cover/ cap (including contractor profit @ 13.615%)

RWSS;Cost and supply of 63mm dia PVC FTA (including contractor profit @ 13.615%)

RWSS;Labour charges for fixing of 5.00 HP/3 Phase Borewell submersible pumpset with all accessories (including contractor profit @ 13.615%)

RWSS;Earth work excavation by manually and depositing on bank with an intial lead and lift in loamy and clayee soils for pipeline trench of size 0.70x 1.00 m including setting out, bracing, removal of stumps and other deleterious material and disposal upto a lead of 50M, dressing of sides and bottom, lowering, laying and jointing of 75mm dia 6kg/cm2 PVC pipes with necessary jointing materials, testing the pipe line to the standard water pressure and refilling the trench with excavated soils to the original surface level etc., complete including Over heads & Contractors profit at 13.615%

RWSS;Cost and supply of 75mm dia 6 kg/cm2 PVC casing pipes including all charges etc., completed (including Contractor profit @ 13.615%)

RWSS;Supply and delivery of the following materials required for fixing of Household tap connections from nearest Distribution lines with specials including cost & conveyance charges etc., complete with overheads and contractors profit @13.615% - 24 Nos. 1..Earth work excavation for structures -- 0.70 Cum 2. 75mm dia PVC Service Saddles ---1.00 Nos. 3. CPVC Pipe of 22.20 mm OD Pipe ----- 2.00 Rm 4. 25mmx1/2" PPR Female Threaded elbow- 1.00 Nos 5.20mm dia GI B-Class Pipes - 0.90Rm 6. 20mm dia GI Elbows -1.00 Nos 7. 20mm dia GI couplings - 1.00 No. 8.20mm dia GI Nipple - 0.30m - 1.00 No 9.20mm dia CI waste not tap - 1.00 Nos 10.20mm dia GM Ferrule - 1.00 Nos 11.600 mm dia RCC Precasted rings - 1.00 Nos 12.labour charges for fixing taps with GI pipes specials for house hold connections - 1.00 No (including contractor profit @ 13.615%) - 1.00Nos 13.Plain Cement Concrete M20 using 20 mm HBG metal - 0.085 Rm

RWSS;Earth work in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical specification 305 MORD / 304 MORTH (including Contractor profit @ 13.615%)

RWSS;Plain Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (Cement:Fine aggregate : Coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, including sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work for foundations (including Contractor profit @ 13.615%)

RWSS;Brick masonry for panel wall with CM(1:6) Proportion using 2nd class traditional bricks of size 23X11X7 Cm from approved source having crushing strength not less than 35kg/cm2 including cost and conveyance of all materials like cement and bricks, water etc., to site including seigniorage charges, sales and other taxes on all materials and all operational incidental and labour charges, constructing masonry, lift charges, curing etc., complete for finished item of work for basement labour serigneorage etc., complete - For foundation and basement (including Contractor profit @ 13.615%)

RWSS;Sand filling in foundation and basement including cost and conveyance of all materials and labour charges, segn. Charges, watering and tamping etc., complete (including Contractor profit @ 13.615%)

RWSS;Plastering with C.M. (1:5), 12 mm thick including cost & conveyance of all materials and labour charges etc. complete (including Contractor profit @ 13.615%)

RWSS;Providing High yield strength deformed (HYSD) steel bars(Fe 415) grade as per IS 1786-1985 of 8mm to 4mm diameters, cutting, bending to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, froming grills for reinforcement work as per approved sources to site of work, including cost and conveyance of binding wire cover blocks and all operational, incidental and labour charges such as cutting, bending, placing in position, tying etc and sales & other taxes on cost all materials complete for finished item of work (including CP at 13.615%)

RWSS;RCC M-20 Nominal mix (Cement:Fine aggregate:Coarse aggregate) using 20mm size graded machine crushed hard granite metal ( coarse aggregate) from approved quarry including cost and conveyance of all materials, including seigniorage charges and labour charges such as machine mixing, laying concrete curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, including centering shuttering for precast top slab (including Contractor profit @ 13.615%)

RWSS;Painting with snowcem or other equal and approved water proof cement paint over primary coat two coat including cost and conveyance of all the materilas etc complete. (including Contractor profit @ 13.615%)

RWSS;Supply and fixing of MS Welded grill gate of size 0.60x0.70 M including cost and conveyance of all materials, labour charges and fabrication charges etc., complete (including Contractor profit @ 13.615%)