Panchayat Raj Engineering Department Tender

Provision for Geologist's survey charges

Supply and fixing of 180 mm dia PVC bore well cap

Cost and supply of 900mm dia RCC rings including all labour, material and transportation charges

Sand filling in foundations and basement, watering and ramming complying to standard specifications including cost and conveyance of all materials and all labour charges etc., complete.

CC(1:2:4) using 20mm HBG metal including cost and conveyance of all materilas,labour charges and centering etc., complete but excluding cost of steel and its fabrication.

Supply and Transportation of 7.50HP Submersible Motor Pumpset 5 Stage, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for 69.0m head and 300lpm discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of recommended brands as category I.

Fabrication ,transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes: As per list of recommended brands . Voltmeter ; 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor

Supply and Fixing of 65mm GI pipe medium grade properties and weight as per IS 1239 with GI fittings such as elbows , tees, couplings,nipples, plugs including excavation for trenches complete except for GI bends, unions and Gi connectors with checkout and socket tata or zenith make or equivalent for pipeline etc., complete. for the purpose of insulating the submersible cable

Supply and Fixing of 4.0sqmm submersible cable wire

Supply and Fixing of 7/16 alluminium service wire

Supply and Fixing of 63Amps Fuse units

Supply and Fixing of 65mm MS long clampsets

Supply and Fixing of Cable joint kit

Errection of 7.5 HP submersible pumpset with all accessories in the existing bore well including all labour etc. complete.

Supplying and fixing of hose cabinet of size 750mm X 600mm x 250mm made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass door including necessary locking arrangement suitable to accommodate 2 Nos 15 mtr long Hose pipe, 1 No branch pipe, mounted on wall OR raised brick platform and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant as required. Makes : As per list of recommended brands.

Cost and supply of 160mm Dia 6 Kg/cm2 HDPE pipes including all labour and transportation charges

Earth work excavation for pipe line trences by manual in all soils except rocky soils including lowering, laying and jointing of pipes with required fittings/specials true to alingment and gradient, refilling with already excavated earth, watering, tamping and removing surplus earth and testing to required hydraulic test pressure etc. complete for finished item of work of 1.00 Rmt for HDPE PE-100 6 Kg/Sqcm Pipe.

Cut opening of Cement Concrete road surface with concrete saw cutter and removal with breaker etc., including all charges compete, including overheads and controctor's profit @ 13.615% but excluding GST and seignourage charges

CC 1:2:4 concrete mix including cost and conveyance of all materials and labour charges, complete for restoration of Cement Concrete road cutting, including overheads and contractor's profit @ 13.615 %, but excluding GST and seignourage charges

Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and exclusive of all taxes on pipe line including supply of Air valve ,DI Specials to suit the pressure class of pipe and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work but excluding GST and as specified in Technical specifications (PartB - Volume I) and as per drawing (Part C - Volume 1) including Over Heads and Contractors profit @ 13.615%

Earth work excavation and depositing on bank with an initial lead of 10m and lift of 2m in loamy and clayey soils like black cotton, red earth and ordinary gravel soils etc., complete as per SS 20 B. For foundations

Sand filling in foundations and basement, watering and ramming complying to standard specifications including cost and conveyance of all materials and all labour charges etc., complete

Cement concrete (1:4:8) using 40mm HB metal SS5 including cost and conveyance of all materials and all labour charges etc., complete

Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 200 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials

RCC (1:2:4) mix using 20mm HBG chips with required quantity of steel per 1 cum of concrete including cost and conveyance of all materials and all labour charges, centering, laying and curing concrete but excluding cost of steel and its fabrication charges

RCC(1:2:4) mix using 20mm HBG Chips required quantity of steel per 1 cum of concrete including cost and conveyance of all materials and all labour charges, centering, laying and curing concrete but excluding cost of steel and its fabrication charges etc for roof slab and Sunshade

Supply and fixing of G.I Door of size 0.75mX1.85m including fittings and fixtures etc., complete item of work

Supply and fixing of G.I window of size 0.75mX0.90m including fittings and fixtures etc., complete item of work

Flooring with 100mm thick Cement Concrete 1:5:10, using 40mm metal, 100mm thick and 20 mm Cement Concrete surface

Plastering with CM(1:5), 20mm thick including cost and conveyance of all materials and all labour charges etc., complete

Plastering with CM(1:5), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete.

Painting with white cement two coats including cost and conveyance of all maerials and all labour charges etc., complet

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surgace to remove all dirt and remains of loose powdered materials, incluldling cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work for internal walls

Cost of Steel including fabrication charges