Panchayat Raj Engineering Department Tender

RWS S;Cost and supply of 50x40mm dia SS nipples (including contractor profit @ 13.615%)

RWS S;Cost and supply of 50mm dia CI Non Return valve (including contractor profit @ 13.615%)

RWS S;Cost and supply of 50mm dia MS Flange sets (including contractor profit @ 13.615%)

RWS S;Cost and supply of 50mm dia MS Clamp sets (including contractor profit @ 13.615%)

RWS S;Cost and supply of 7/16 Service wire (including contractor profit @ 13.615%)

RWS S;Cost and supply of 2.50Sqmm 3 Core Flat type cable (including contractor profit @ 13.615%)

RWS S;Cost and supply of 180mm dia PVC Bore cover /cap (including contractor profit @ 13.615%)

RWS S;Cost and supply of 75mm dia PVC FTA (including contractor profit @ 13.615%)

RWS S;labour charges for fixing of 5.00HP/3 Phase Borewell submersible pumpset with all accessories (including contractor profit @ 13.615%)

RWS S;Earth work excavation by manually and depositing on bank with an intial lead and lift in loamy and clayee soils for pipeline trench of size 0.70x 1.00 m including setting out, bracing, removal of stumps and other deleterious material and disposal upto a lead of 50M, dressing of sides and bottom, lowering, laying and jointing of 75mm dia 4kg/cm2 PVC pipes with necessary jointing materials, testing the pipe line to the standard water pressure and refilling the trench with excavated soils to the original surface level etc., complete including Over heads & Contractors profit at 13.615%

RWS S;Manufacture, Supply & Delivery of PVC 75mm dia 4kg/cm2 PVC pipes for Potable water supplies confirming to IS 4985/2000 (3rd Rev) with Bell ends (socket) as per specifications in light grey / Natural ivory grey / any other Colour (except white) inclusive of transportation, excluding GST (including Contractor profit @ 13.615%)

RWS S;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of ductile cast iron of grade GGG 40 / SG 400/15 or GGG-50/SG-500/7 or equivalent grade as per I S 1865, IS 3896-2 and wedge fully Rubber lined with food grade quality grade W270 grade EPDM , Replaceable Spindle, Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The valves should be Vacuum fight and 100% leak proof with face to face dimensions as BS:5163 type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)-RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A flange drilling as per IS - 1538 excluding all taxes, duties and transportation. 80mm dia , Conveyance charges at 5% on basic cost of Valve. (1)..80mm dia CID Jointws including Bolts & Nuts and Rubber Rings -- 2sets. (2). 80mm dia 0.60M CI Tail piece --- 31.16 Kg, (3).Bolts & Nuts - 1.04Kgs (4). Rubber packing sheet 6mm thick ---- 1.06Kgs (5). Labour charges for loweing and jointing of 80mm dia CI pipes -- 1.20 Rm. (6). Labour charges for jointing of 80mm dia CI pipes, fittings and valves with flanged ends ------ 1.20Rm (7). Labour charges for fixing of 80mm dia DI Sluice valves including CP @ 13.615%

RWS S;Providing House hold connections from nearest distribution line - 45 Nos. Providing House hold service connection from nearest distributions line using following items 1. Earth work excavation for pipeline trench of size 0.70 X 1.00 --- 45.00 Rm. 2. Earth work ecavation as per specificatin ------- 40.50 Cum 3. 90mm dia PVC Service Saddle - 45 Nos. 4. CPVC Pipe of 22.20mm OD Pipe -------------- 135Rm 5. 25mm x1/2" PPR Female Threaded Elbow ---- 45Nos. 6. 20mm dia GI B Class Pipe - 40.50 Rm 7. 20mm dia GI elbows - 45Nos 8. 20mm dia GI couplings - 45 Nos. 9. 20mm dia GI Nipple - 0.30m - 45 Nos 7. 20mm dia GI waste not tap - 45set. 8. 20mm dia GM Ferrule- 45Nos 9. 600mm dia RCC Precasted Rings --- 45Nos 10.labour charges for fixing taps with GI pipes specials for house hold connections - 45Nos (including contractor profit @ 13.615%)