Panchayat Raj Engineering Department Tender

Cost of Nylon cloth

Supply and Transportation of 10.00 HP 12-16 stage,5star rated submersible motor pumpset,confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well.Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/Aryen Varsha including contractor profit

Supply and fixing of 50 mm dia Nominal Bore GI pipe Light Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings etc., complete

Fabrication ,transportationand supply and fixing of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting ofVolt meter, ammeter,single phase preventer, MCB, indication lamps, voltmeter and capacitor with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets 7.5 HP to 12.5 HP with automatic star delta starter, make: Crompton/ L&T/ Siemens/ BCH

Supply of 3 core 4.0 sqmm Flat copper cable of IS 694:1990 for submersible motors of makes Finolex/ Polycab/ Havells/ V Guard/ Gold Medal/ GM/ Million/ Vimal/ Nandicab/ Kundan cab/ Hi-Tech

Supply and fixing of 50 mm Dia GI Bends as per standerd specification

Supply and fixing of MS Clamp set ( 2 Nos ) suitable for 50mm dia pipe with 8 Nos bolts and nuts as per standerd specification

Supply and fixing of 7/20 Copper service wire as per standerd specification

Supply and fixing of 180mm dia MS Bore Cap as per standerd specification

Supply and fixing of 50 mm Dia CI Flange Set as per standerd specification

Supply and fixing of 50 mm Dia MS clamp set as per standerd specification

Labour charges for erection of three phase submersible pumpsets including pipe connection for suction and delivery and all labour charges etc., complete.,

Construction of 90 mm dia PVC - 6 Kgs/cm2 pipelines as per IS 4985/2000 (3rd Revision) specifications, with its amendments and revisions thereon including supplying of pipes,necessary specials such as bends, Tees, etc. lowering, laying and jointing of pipe lines true to alignment and trench excavation of 0.70 X 1.00M for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete as specified in Technical specifications (PartB - Volume I) . The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work.

Cost, Supply, delivery and Fixing of 40 mm dia "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG- 400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN- 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation including DI Flanged sockets, jointing meterials such as bolts nuts and rubber washers including meterials cost for main line labour charges for Flanged Joints and Lowering of valves, etc., completed. on 90mm dia PVC Pipe line

Supply of laying of 80 mm dia GI Class B pipe including cost, conveyance & labour charges etc., complete

Construction of 90 mm dia PVC - 4 Kgs/cm2 pipelines as per IS 4985/2000 (3rd Revision) specifications, with its amendments and revisions thereon including supplying of pipes,necessary specials such as bends, Tees, etc. lowering, laying and jointing of pipe lines true to alignment and trench excavation of 0.70 X 1.00M for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete as specified in Technical specifications (PartB - Volume I) . The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work.

Construction of 75 mm dia PVC - 4 Kgs/cm2 pipelines as per IS 4985/2000 (3rd Revision) specifications, with its amendments and revisions thereon including supplying of pipes,necessary specials such as bends, Tees, etc. lowering, laying and jointing of pipe lines true to alignment and trench excavation of 0.70 X 1.00M for pipelines in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete as specified in Technical specifications (PartB - Volume I) . The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work.

Cost, Supply, delivery and Fixing of 40 mm dia "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG- 400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN- 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation including DI Flanged sockets, jointing meterials such as bolts nuts and rubber washers including meterials cost for main line labour charges for Flanged Joints and Lowering of valves, etc., completed. on 90mm dia PVC Pipe line

Supply, laying and jointing and testing of 80 mm dia GI B Class pipe including cost, conveyance & labour charges etc., complete.

Construction of 20 KL capacity Over head service Reservoir with 9.65 mts staging of approved type design with VRCC framed structure M30 grade concrete single compartment inside dia of 4.00 mts & 1.90 mts Height walls the LWL being 0.15 meters above bottom slab, a free board of 0.15mts Below top slab and capable of holding 20,000 lts with salient levels as per departmental plan.The Reservoir should be provided with 2 Nos of D.I.Light type manhole frame with a cover of 600X600mm size RCC ventilator with copper or Stainless steel fly proof mesh with central RCC phenial of 600mm dia, RCC /Aluminium precast ladder 600mm width inside reservoir from floor level to roof level embeded at bottom with concrete as per standard pattern including cost, conveyance of all materials, labour charges and curing with all water leads etc, complete, one no of lighting arrestor of approved pattern with necessary earth connections, One no.of water level indicator of approved pattern,Stainless Steel Hand railing as per drawing at top around the tank and one no. of spiral stair case of 600mm width as per approved design with SS 304 hand railing of 1.20 mts height as per drawing outside the reservoir from ground level to roof level including painting with enamel paint of approved colour two coats over a primary coat of red-oxide including cost, conveyance of all materials, labour charges etc.,complete with inlet,outlet,over flow and scour arrangements upto ground level including fixing duckfoot bends at bottom rested in CC(1:2:4) mix using 20mm size machine crushed metal concrete bed of size 45X45X60cm as per the instructions of department excluding cost of pipes,valves and duck foot bends which will not be supplied by the department, including hoisting and joining of pipes and jointing materials and painting, with paint of approved colour two coats as directed by the department, construction of valve pits for scour valves with cover slab including construction of drains for scour and over flow arrangements etc., including outside plastering. The dog legged staircase shall be enclosed with brick/CRS wall on 3 sides and front side with MS collapsible gate up to first brace level from ground level. DI swan neck ventilators shall be provided in top dome and slab.in CM (1:3) and painting with two coats of snowcem over primary coat of white cement for out side area and three coats of epoxy paint to inner surface of the reservoir including roof slab complete including testing the reservoir, cost & conveyance of all materials, labour charges, centering charges, all water leads and including foundations of OHSR as per marking and details furnished by the departmental officers during the course of execution etc.,complete-including cost of steel and its fabrications charges as per Common SSR 2019-20.

Supply and delivery, fixing of 80 mm dia CI D/F pipes 2.00 mt long - 22 Nos, 80mm dia Bell mouth - 1 No, 80mm dia CI D/F Pipes 0.6 mts length - 2Nos, 80mm dia CI tail piece 0.6mts - 1 No, 80mm dia CI 90deg bends - 2 Nos, 80mm dia CI Duck foot bends - 4 Nos, 80mm dia CI Semi circular bends - 2 No, 6mm dia thick rubber packing for CI joints - 20 Kgs , 80mm dia D/F 0.9mts Pipe - 2 Nos, bolts and nuts etc.,- 30 Kgs, rubber packing - 20Kgs and 80mm dia DI sluice Valves PN 1.60 - 2 Nos.