Panchayat Raj Engineering Department Tender

"O&M of Transmission lines,water treatment plant of JCNR Project of Ananthapuramu district for the year 2020-21 " to supply water at the rate of 40 LPCD to rural area and 135 LPCD to Tadipatri municipality in a prescribed time through the existing net work system duly treating the water by adding bleaching powder as per I.S. specifications and maintaing residual chlorine at 0.20 PPM at all taps in the village distrubution system for all the habitations as per the sanctioned estimates and department guidelines including , filling of OHSRs,GLSRs continuosulsy etc, as per specifications and directions of the departement persons, safe guarding assests of the scheme for the period from the date of agreement as per the directions of the department for the year2020-21 from 01.08.2020 to 31.03.2021 (243 days) ( 37 MLD plant Operators for Treatment Plant filters Clear water Pump house) excluding GST at 12%

Supply, Delivery of D.I double flanged 80 mm dia Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover, Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem, Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber; Gear, Gear housing with Cast Steel including jointing material, transportation & CP complete ISI marked and but excluding GST at 12% for 80mm dia PN1.6 on DI Pipe line

Supply, Delivery of D.I double flanged 100 mm dia Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover, Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem, Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber; Gear, Gear housing with Cast Steel including jointing material, transportation & CP complete ISI marked and but excluding GST at 12% for 100mm dia PN1.6 on DI Pipe line