Panchayat Raj Engineering Department Tender

Filling with Sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and Cost and Conveyance of water to site and all operational, incidental, labour charges, sales and other taxes etc, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Plain Cement Concrete (1:4:8) prop nominal mix (cement: fine aggregate: coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry (obtained by blasting) including Cost and Conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)

Plain Cement Concrete (1:2:4) prop nominal mix (cement: fine aggregate: coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry (obtained by blasting) including Cost and Conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)

Providing and fixing M40 grade high density cobble stone interlock pavers of 80 mm thick using 12 mm & down size HBG crushed metal for manufacture of blocks - approved by the department and approved size & shape of dumbell, zigzag, I-block or any other shape approved by the department, over sand bed of 50 mm average thickness and compacting with vibrating plate compactor having 3 tone compaction force there by forcing part of sand undeneath to come up in between joints final compaction of paver surface to be done after spreading and brushing the fine sand in to joints to its final level. The work includes cost of all materials such as cobble stone. Interlock pavers, sand etc., labour and equipments such as cutting machine lift, loading & unloading to work site, clearing, bringing required for the sucessful completion of work as per drawings and Technical Specification clause 1504 MORD and as directed during execution by the Engineer-in-charge of the work

Supply and fixing of Truss/Frame with MS Rectangular/Circular tubes including cost of materials, fabrication charges and fixing in position charges etc., complete

Roofing with 0.5 mm thick Galvanized / Pre-painted GI Profiled Sheets fixed to GI pipes fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stritched with self tapping / drilling screws. End laps are to be sealed with 25X3 mm Butyl tape. The sheets are provided with anti capillary Groove including cost of conveyance of all materials and labour charges etc., complete

Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades to give an even shade over base coat Primer with Luppam finishing after thoroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, sales & other taxes, all operational, incidental and labour charges etc., complete for finished item of work.(3 coats) (APSS No.1201 & 1212)