Panchayat Raj Engineering Department Tender

Labour charges for Slotter cutting to 180mm dia 6Kg/cm2 PVC Casing Pipe including all incidental charges etc.complete with over heads and contractor profit @ 13.615%

Survey and Investigation charges to Geologist for identifying sustainable source including vehicle hire charges for survey, Man mazdoor charges for helping during survey, fuel charges, crew charges and all other incidental charges etc.complete with over heads and contractor profit @ 13.615%

Supply and Transportation of 5.00HP, 5-10 Stage, 5 Star rated Borewell Submersible Pumpset confirming to IS:8034 and motor confirming to IS:9283 with water proof winding, Pump shall be sutiable for various delivery head and discharge with stainless steel shaft, Motor suitable for working on 415V + 10%, Three Phase 50Hz AC Supply etc.complete for 6" Borewell of ISI makes Kriloskar / Crompton / Texmo / CRI / KSB / Lubi / PSG / Aryen Varsha including over heads and contractors profit @ 13.615%

Fabrication, Transportation and Supply of Wall mounted Control Panel Board of size 600x600x250mm made of 18SWG CRCA Sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated, painted with two coats of Red oxide primer and two coats of Grey Paint, Lock and Key arrangements two side levures with weld mesh inside etc.complete consisting of (a) 1No of Voltmeter - 0-500V (96x96mm size) of makes L&T/C&S/SALZAR/HPL/ AEI/Meco/Rishab, (b) 1 No of 0 to 20 Amps / 0 to 50 Amps Ammeter (96x96mm size) of makes L&T/C&S/SALZAR/ HPL /AEI/Meco/Rishab, (c) 1No of Single Phase preventor of suitable range of makes L&T/Minilec/ Powertec, (d) 1No of 32A TP, 10KA MCB Makes Legrand/Schneider, (e) 1 Set of Indication Lamps (R-Y-B) with Switch Control, (f) 2Nos of Voltmeter & Ammeter selector switch, (g) Supply and fixing of ISI Mark suitable capacitor of makes L&T/Siemens/Schneider/Epcos/Havells upto 7.50HP with DOL Starter of makes C&S. Crompton/L&T/Siemens/ BCH with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc.complete for 3Phase motor pump sets including over heads and contractors profit @ 13.615%

Supply & Delivery of 50mm dia GI Medium B Class Pipe of ISI Make including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Supply and delivery of 50mm dia GI Heavy Couplings of ISI Make including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Supply and delivery of 50mm dia GI Bends of ISI Make including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Supply and delivery of 50mm dia DI Non-return Valve - PN 1.6 (Mpa) of ISI Make confirming to IS-5312 with all accessories including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Supply and delivery of 50mm dia MS Flangesets of ISI Make including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Supply and delivery of 50mm dia MS Clampsets of ISI Make including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Supply and delivery of 7/16 Service wire of ISI Make including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Supply and Transportation of 3Core 4.00Sqmm ISI marked Flat Cable wire of ISI for Submersible Motors confirming to IS: 694:1990 etc complete of Makes Torrent / Universal / Unicab / Havells / KEI /Polycab/Gloster/orbit /Paragon/RR Kabel/RPG with over heads and contractors profit @ 13.615%

Supply and delivery of 180mm dia PVC End Cap of ISI make to utilize in the Borewell including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Supply and delivery of 75mm dia PVC FTA of ISI make including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Installation & Errection of 3Phase 5.00HP Borewell Submersible Pumpset with all accessories in to the drilled borewell source including testing, commissioning and conducting trail run for a period of 15 days as directed by the Department including all labour charges etc.complete with over heads and contractors profit @ 13.615%

Construction of Circular 40,000Lts Capacity 12.90mts Staging, M30 Grade design mix and FE 500D Steel at the sited selected by the Department for VRCC Elevated Service Reservoir with VRCC Roof at having inside diameter of 5.00mts and 2.40mts Sidewall depth, the dead storage being 0.15mts, above bottom ring girder top with Single compartment and capable of holding 40,000 Lts and with standing a wind pressure of 185.21Kg per sqm. Rates shall be inclusive of 3 Coats of epoxy paint to inner surface of the reservoir including roof slab, 2 Coats of weather proof emulsion painting over primary coat for external surfaces, lettering, all required fixtures such as pipes, bends, valves etc. for pipe connections as per departmental designs and tentative drawings enclosed and the following fixtures are also inclusive and testing OHSR for water tightness as per standard proceedure. (1) The structure is VRCC M30 Grade Concrete (for all members), (2) 2 Coats of weather proof emulsion painting over primary coat for external surfaces, (3) Lettering as directed by the Department on front side of OHSR Container, (4) Fixing of Pipes, bends, valves etc. for pipe connections of Inlet, Outlet, Overflow & Scour connections including cost of pipes, bends, valves, jointing materials (5) RCC/Aluminium Ladder - 0.60mts wide inside reservoir, (6) RCC Spiral Staircase on outside reservoir as directed by the Department, (7) Ligtening arrestor including copper conductor and standard earthing as per APDSS, (8) Water level indicator with enobite/copper float of approved pattern - 1No, (9) RCC Phenial ventilator with copper or stainless steel fly proof mesh, (10) DI Manhole frame & cover of 0.60x0.60mts (Light duty) - 2Nos of ISI Make, (11) Hand Railing with 32mm dia 304 grade stainless steel pipe arround OHSR in RCC(1:2:4) to a height of 1.20Mts for RCC Spiral staircase, gallery along periphery on top of OHSR, (12) DI Swan neck ventilators shall be provided in top slab, i(13) Bed Blocks of 0.45x0.45x0.30mts in CC M15 Mix below all the Duck Foot Bends and the rates are inclusive of DI Verticals for all Inlet, Outlet, Overflow and Scour connections (as per Estimate diameters) and DI Valves, All valves near Inlet, Out let and for Scour shall be DI Valves of heavy duty conforming to the specification including cost and conveyance of all materials, centring, curring and labour charges etc. complete for finished item of work but excluding GST Charges with Over heads and Contractors profit @ 13.615% asper drawings approved by the department.

Construction of Pipeline for water supply with HDPE (PE-100) grade pipes as per IS 4985-1988 with its amendments and revisions there on including supply of pipes, specials as per requirements, trench excavation for pipelines in all soils except rock required blasting by 2/3 machinery and 1/3 manually and depositing on bank with an initial lead and lift in all soils for pipeline trench of size 0.70x1.00 mts including setting out, bracing, removal of stumps and other deleterious material and disposal upto a lead of 50M, dressing of sides and bottom, lowering, laying and jointing of 75mm dia HDPE 6Kg/Cm2 Pipe pipelines true to alignment and gradient and refilling trenches with excavated earth (other than rock soils) with watering and removing surplus earth from the site of work and filling pipeline with water and testing etc., complete, the rates inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work but excluding GST charges etc.complete with Over Heads & Contractors Profit @ 13.615%

Supply & Delivery of "Resilient Seated Soft Sealing" Gate Valve (Sluice Valves) with body and bonnet of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS:1865, IS:3896-2 and Wedge fully Rubber lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O rung protection system on the shaft and seals of NBR. The Valve should be Vaccum tight and 100% leak proof with face to face dimensions as per BS:5163 Type A / IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket less straight through body passage confirming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties including Supply of Sluice Valve, CI Pipes & Specials as per requirement etc.complete for finished item of work as specified in Technical Specifications (Part-B, Volume-I) but excluding GST and other taxes including cost and conveyance of all materials and all labour charges with Over heads and Contractor profit @ 13.615%for 80mm dia DI Sluice Valve on (75mm dia Line)

Cutting Open CC Road surface with concrete saw cutter including stacking of excavated materials for pipeline trench including all labour charges etc., with over head & contractor profit at 13.615%

VCC M20 nominal mix using 20mm HBG metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and all operational, incidental and labour charges such as machine mixing laying concrete, curing concrete, centring charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work for laying of CC Road with over heads and contractors profit at 13.615%

Supply and Fixing of House Service Connections using (PP Saddle) PP Clamp Saddles - PP Clamp contoured to fit around the pipe and shall be Blue/Black moulded in with Nickle plated Brass/SS304 metal female threaded oulets, Thread dimension shall confirm to IS-554/ISO-7, Cost and Supply of Tamper proof house hold Non-return cum Flow control valve (with all three parts made by using solid steel bars of SS 319) with CNC machine make and of 15mm dia, designed for 5LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7LPM at 1 bar pressure and working on float priniciple (as per CPHEO manual), Cost, Supply and fixing of compression fittings comply with ISO-17885-2015, PN-16 rating and manufacturing from virgin resing of PE-80 having blue colour. Raw material must be WRAS approved as per BS-6920 for effect on water quality intended for human consumption. Compression fittings should have moulded in SS 304 threaded insert outlet with threaded dimension confirming to IS-444/IS-07, including supply and fixing of 20mm dia OD HDPE Pipe 16.00Kg/sqm to a length of 3.00mts and 15mm dia GI Pipe medium grade properties and weight as per IS-12391 ISI mark with GI Fittings and Supply and fixing of 12.7mm Brass Bib cock (long body) Indian make heavy duty. The cost shall include testing of all materials, labour charges, all taxes (Central and State), Inspection charges, Transportation up to site, transit insurance, loading, unloading, stacking and fixing etc.complete as specified and directed by the department engineer incharge exluding GST charges including contractor' profit & overheads @ 13.615%. (on 75 mm dia Pipe)