Panchayat Raj Engineering Department Tender

Supply and Transportation of 5 Star rated Submersible motor pumpsets,confirming ot IS 8034 and Motor confirming to IS 9283 with water proof winding,pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240 V +/- 10%,single phase 50 Hz AC supply,etc., complete for Bore well. Makes: Kirloskar/Crompton/Texmo/CRI/KSB/Lubi/PSG/Aryen Varsha/Falcon.The work inclusive of all the essential accessories like suction pipe,Valves,Copper cable,end cap,MS clamp, Panel board with standard make etc., The scope including all labour charges,cost of all the materials to the extent of departmental satisfaction for finished item of work including Over heads and Contractor profit @13.615% but excluding GST.

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P,excluding GST and seigniorage charges but including contractor' profit & overheads @ 13.615%. (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) 63 mm dia 6 Kg /Cm² HDPE Pipe

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P,excluding GST and seigniorage charges but including contractor' profit & overheads @ 13.615%. (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) 75 mm dia 6 Kg /Cm² HDPE Pipe

Earth Work excavation and depositing on bank with an initial lead of 10 meters and lift of 2.00 meters in all types of soils except hard rock requiring blasting for pipeline and lowering and laying of H.D.P.E Pipes into trench placing them true to alignment and gradient, jointing the H.D.P.E pipes, specials and fixing of valves with bolts and nuts and rubber packings, filling of pipes with water with an initital lead of 500m and testing the pipeline to the required pressure and make it leak proof, refilling the trench with excavated earth excluding cost and conveyance of pipes and including all other charges 63 mm x 6 Kg/Sq.cm HDPE Pipe (PE 100 Grade) , Trench of size 0.70 x 1.0 m with 2/3rd machinary and 1/3rd manual

Earth Work excavation and depositing on bank with an initial lead of 10 meters and lift of 2.00 meters in all types of soils except hard rock requiring blasting for pipeline and lowering and laying of H.D.P.E Pipes into trench placing them true to alignment and gradient, jointing the H.D.P.E pipes, specials and fixing of valves with bolts and nuts and rubber packings, filling of pipes with water with an initital lead of 500m and testing the pipeline to the required pressure and make it leak proof, refilling the trench with excavated earth excluding cost and conveyance of pipes and including all other charges 75mm x 6 Kg/Sq.cm HDPE Pipe (PE 100 Grade) , Trench of size 0.70 x 1.0 m with 2/3rd machinary and 1/3rd manual

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P,excluding GST and seigniorage charges but including contractor' profit & overheads @ 13.615%. (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) 63 mm dia 6 Kg /Cm² HDPE Pipe

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P,excluding GST and seigniorage charges but including contractor' profit & overheads @ 13.615%. (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) 75 mm dia 6 Kg /Cm² HDPE Pipe

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P,excluding GST and seigniorage charges but including contractor' profit & overheads @ 13.615%. (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) 90 mm dia 6 Kg /Cm² HDPE Pipe

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P,excluding GST and seigniorage charges but including contractor' profit & overheads @ 13.615%. (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) 110 mm dia 6 Kg /Cm² HDPE Pipe

Earth Work excavation and depositing on bank with an initial lead of 10 meters and lift of 2.00 meters in all types of soils except hard rock requiring blasting for pipeline and lowering and laying of H.D.P.E Pipes into trench placing them true to alignment and gradient, jointing the H.D.P.E pipes, specials and fixing of valves with bolts and nuts and rubber packings, filling of pipes with water with an initital lead of 500m and testing the pipeline to the required pressure and make it leak proof, refilling the trench with excavated earth excluding cost and conveyance of pipes including all other charges 63 mm x 6 Kg/Sq.cm HDPE Pipe (PE 100 Grade) , Trench of size 0.70 x 1.00 m (2/3 machinary &1/3 manual)

Earth Work excavation and depositing on bank with an initial lead of 10 meters and lift of 2.00 meters in all types of soils except hard rock requiring blasting for pipeline and lowering and laying of H.D.P.E Pipes into trench placing them true to alignment and gradient, jointing the H.D.P.E pipes, specials and fixing of valves with bolts and nuts and rubber packings, filling of pipes with water with an initital lead of 500m and testing the pipeline to the required pressure and make it leak proof, refilling the trench with excavated earth excluding cost and conveyance of pipes including all other charges 75 mm x 6 Kg/Sq.cm HDPE Pipe (PE 100 Grade) , Trench of size 0.70 x 1.00 m(2/3 machinary &1/3 manual)

Earth Work excavation and depositing on bank with an initial lead of 10 meters and lift of 2.00 meters in all types of soils except hard rock requiring blasting for pipeline and lowering and laying of H.D.P.E Pipes into trench placing them true to alignment and gradient, jointing the H.D.P.E pipes, specials and fixing of valves with bolts and nuts and rubber packings, filling of pipes with water with an initital lead of 500m and testing the pipeline to the required pressure and make it leak proof, refilling the trench with excavated earth excluding cost and conveyance of pipes including all other charges 90 mm x 6 Kg/Sq.cm HDPE Pipe (PE 100 Grade) , Trench of size 0.70 x 1.00 m (2/3 machinary &1/3 manual)

Earth Work excavation and depositing on bank with an initial lead of 10 meters and lift of 2.00 meters in all types of soils except hard rock requiring blasting for pipeline and lowering and laying of H.D.P.E Pipes into trench placing them true to alignment and gradient, jointing the H.D.P.E pipes, specials and fixing of valves with bolts and nuts and rubber packings, filling of pipes with water with an initital lead of 500m and testing the pipeline to the required pressure and make it leak proof, refilling the trench with excavated earth excluding cost and conveyance of pipes including all other charges 110 mm x 6 Kg/Sq.cm HDPE Pipe (PE 100 Grade) , Trench of size 0.70 x 1.00 m (2/3 machinary &1/3 manual)

Existing Cut opening of Cement Concrete road surface with concrete saw cutter and removal with breaker etc., including all charges compete, including overheads and controctor's profit @ 13.615% but excluding GST and seignourage charges

CC 1:2:4 concrete mix including cost and conveyance of all materials and labour charges, complete for restoration of Cement Concrete road cutting, including overheads and contractor's profit @ 13.615 %, but excluding GST and seignourage charges

CC road Cutting Earth Work excavation and depositing on bank with an initial lead of 10 meters and lift of 2.00 meters in all types of soils except hard rock requiring blasting for pipeline and lowering and laying of H.D.P.E Pipes into trench placing them true to alignment and gradient, jointing the H.D.P.E pipes, specials and fixing of valves with bolts and nuts and rubber packings, filling of pipes with water with an initital lead of 500m and testing the pipeline to the required pressure and make it leak proof, refilling the trench with excavated earth excluding cost and conveyance of pipes including all other charges 63 mm x 6 Kg/Sq.cm HDPE Pipe (PE 100 Grade) , Trench of size 0.5 x 0.8 m (manual)

CC road Cutting Earth Work excavation and depositing on bank with an initial lead of 10 meters and lift of 2.00 meters in all types of soils except hard rock requiring blasting for pipeline and lowering and laying of H.D.P.E Pipes into trench placing them true to alignment and gradient, jointing the H.D.P.E pipes, specials and fixing of valves with bolts and nuts and rubber packings, filling of pipes with water with an initital lead of 500m and testing the pipeline to the required pressure and make it leak proof, refilling the trench with excavated earth excluding cost and conveyance of pipes including all other charges 75 mm x 6 Kg/Sq.cm HDPE Pipe (PE 100 Grade) , Trench of size 0.5 x 0.8 m ( manual)

Supply and Fixing of 65 mm GI pipe medium grade properties and weight as per IS 1239 with GI fittings such as elbows , tees, couplings,nipples, plugs including excavation for trenches complete except for GI bends, unions and Gi connectors with checkout and socket tata or zenith make or equivalent for pipeline ect., complete

Supply and Fixing of 50 mm GI pipe medium grade properties and weight as per IS 1239 with GI fittings such as elbows , tees, couplings,nipples, plugs including excavation for trenches complete except for GI bends, unions and Gi connectors with checkout and socket tata or zenith make or equivalent for pipeline ect., complete

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent as per IS:1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The valves should be Vacuum tight and 100% leak proof with face to face dimensions as per BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS:1538, construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc., complete for finished item of work. The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of work, but excluding GST and seignourage charges as specified in Technical specifications including overheads and Contractor's profit @ 13.615%. 80mm Sluice valve on 63MM dia line

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent as per IS:1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The valves should be Vacuum tight and 100% leak proof with face to face dimensions as per BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS:1538, construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc., complete for finished item of work. The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of work, but excluding GST and seignourage charges as specified in Technical specifications including overheads and Contractor's profit @ 13.615%. 80mm Sluice valve on 75MM dia line

Construction of Functional Household Tap Connections (FHTC) on 63 mm dia main with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 1/2" service connection) and Regulating brass ferrule of pressure rating PN 10,including testing of all materials, labor, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking and fixing etc., complete as specified and directed by the departmental Engineer in charge and compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304 threded insert outlet with threded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2") including supply, delivery and fixing of 12.7mm dia Brass Bib cock(short body) Indian make heavy duty tap of weight 155-165 gm excluding GST and seigniorage charges but including contractor' profit & overheads @ 13.615%.

Manufacture, Supply & delivery of 20mm OD HDPE pipe 16.0 kg/sqcm conforming to IS 4984-2016 of PE-100 grade material along with all fittings, including cost of materials, manufacturing, loading, unloading, stacking, transit Insurance, transportation excluding all taxes including Laying, Jointing of 20mm dia HDPE pipes as per BIS No.7634 part-II/75 ( including trench excavation upto 0.5 mts depth including testing, refilling etc., complete)excluding GST but including contractor' profit & overheads @ 13.615%.

Cost, supply & fixing of 15 mm Nominal Bore GI Pipe Medium Grade properties & weight as per IS 12391 ISI mark with GI Fittings including the cost of pipe & its fittings, labour charges etc complete excluding GST but including contractor' profit & overheads @ 13.615%.

Construction of Functional Household Tap Connections (FHTC) on 75 mm dia main with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 1/2" service connection) and Regulating brass ferrule of pressure rating PN 10,including testing of all materials, labor, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking and fixing etc., complete as specified and directed by the departmental Engineer in charge and compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304 threded insert outlet with threded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2") including supply, delivery and fixing of 12.7mm dia Brass Bib cock(short body) Indian make heavy duty tap of weight 155-165 gm excluding GST and seigniorage charges but including contractor' profit & overheads @ 13.615%.

Manufacture, Supply & delivery of 20mm OD HDPE pipe 16.0 kg/sqcm conforming to IS 4984-2016 of PE-100 grade material along with all fittings, including cost of materials, manufacturing, loading, unloading, stacking, transit Insurance, transportation excluding all taxes including Laying, Jointing of 20mm dia HDPE pipes as per BIS No.7634 part-II/75 ( including trench excavation upto 0.5 mts depth including testing, refilling etc., complete)excluding GST but including contractor' profit & overheads @ 13.615%.

Cost, supply & fixing of 15 mm Nominal Bore GI Pipe Medium Grade properties & weight as per IS 12391 ISI mark with GI Fittings including the cost of pipe & its fittings, labour charges etc complete excluding GST but including contractor' profit & overheads @ 13.615%.

Construction of Functional Household Tap Connections (FHTC) on 90 mm dia main with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 1/2" service connection) and Regulating brass ferrule of pressure rating PN 10,including testing of all materials, labor, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking and fixing etc., complete as specified and directed by the departmental Engineer in charge and compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304 threded insert outlet with threded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2") including supply, delivery and fixing of 12.7mm dia Brass Bib cock(short body) Indian make heavy duty tap of weight 155-165 gm excluding GST and seigniorage charges but including contractor' profit & overheads @ 13.615%.

Manufacture, Supply & delivery of 20mm OD HDPE pipe 16.0 kg/sqcm conforming to IS 4984-2016 of PE-100 grade material along with all fittings, including cost of materials, manufacturing, loading, unloading, stacking, transit Insurance, transportation excluding all taxes including Laying, Jointing of 20mm dia HDPE pipes as per BIS No.7634 part-II/75 ( including trench excavation upto 0.5 mts depth including testing, refilling etc., complete)excluding GST but including contractor' profit & overheads @ 13.615%.

Cost, supply & fixing of 15 mm Nominal Bore GI Pipe Medium Grade properties & weight as per IS 12391 ISI mark with GI Fittings including the cost of pipe & its fittings, labour charges etc complete excluding GST but including contractor' profit & overheads @ 13.615%.