Panchayat Raj Engineering Department Tender

Supply and delivery of GI Pipe B-Class as per BIS : 783/85 including cost and conveyance, excluding taxes etc. complete for 1.00 Rmt. 80mm GI ‘B’ Class Pipe

Cement plastering with CM(1:5),12mm thick including cost and conveyance of all the materials ect complete.

Flush Pointing with CM(1:3) including cost and conveyance of all the materials etc complete

Supply and placing of the HYSD bars, fabrication including cost and conveyance of all the materials etc complete.

Supply and delivery of HDPE PE-100 6 Kg/Sqcm Pipes as per IS : 4984/2016 including cost and conveyance, excluding taxes etc. complete for 1.00 Rmt. 75mm dia HDPE - 6Kg/cm2

Filling the Foundation with sand including cost,conveyance ,watering and ramming etc complete.

VRCC(1:1.5:3) using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for Columns footing

Brick Masonary with CM(1:6) using Second Class Bricks including cost and conveyance of all the materials etc complete for superstructure

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation and construction of valve chamber. 100mm dia on 110mm dia line

Brick Masonary with CM(1:6) using Second Class Bricks including cost and conveyance of all the materials etc complete

Supply and delivery of GI Pipe B-Class as per BIS : 783/85 including cost and conveyance, excluding taxes etc. complete for 1.00 Rmt. 65mm GI ‘B’ Class Pipe

VRCC(1:1.5:3) using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for Columns

PCC (1:2:4) using 20mm HBG metal including cost and conveyance of all materials and labour charges, complete for restoration(after deducting 50 mm pipe dia) of Cement Concrete road cutting, including all charges etc complete

Supply and delivery of HDPE PE-100 6 Kg/Sqcm Pipes as per IS : 4984/2016 including cost and conveyance, excluding taxes etc. complete for 1.00 Rmt. 90mm dia HDPE - 6Kg/cm2

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation and construction of valve chamber. 80mm dia on 90mm dia line

House service connections (PP Saddle) PP excluding GST Clamp saddles-PP clamp Saddles shall be maunfactured by injection moulding using virgin polypropylene. Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be moulded with SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure plications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odiur & Flavour of water ii) Appearance of water iii) Growth of Micro Organism iv) Extraction of Substances that may be of concern to public health (Cyto toxicity) v) Extraction of Metals, Cost and Supply of Flow Control Valve 20mm 5-10Lpm Supply and Fixing of compression fittings shall comply with ISO 17885 2015, PN-16 rating and manufactured from virgin resin of PE-80 having blue color. Raw material must be WRAS approved as per BS 6920 for effect on water quality intended for human consumption. Compression fittings should have moulded in SS 304 threaded insert outlet with thread dimension confirming to IS 554/ISO 7. The cost shall include testing of all materials, labor all taxes (central and state), inspection charges, transportation up to site, transit insurance, loading, unloading, stacking and fixing etc, complete as specified and directed by the departmental Engineer in charge. a)Compression male/female threaded adaptor (with SS insert D20 mmx 1/2")- 2No's for each tap b)Compression male/female threaded Elbow with SS insert D20mmx1/2 inch a) Cost of 20mm dia OD HDPE pipe 16kg/cm2 -3 Rm for each tap b) Laying and jointing 20mm dia HDPE pipes including trench excavation upto 0.5mts depth including testing refilling etc complete S/F 15 mm Nominal bore GI Pipe medium grade properties as per IS 1239 ISI mark with GI fittings including cost of pipe & its fittings, labour charges etc., complete- 1.40 Rm for each tap S&F of 12.7mm brass bib cock(longer body) Indian make heavy duty excluding GST on 75 mm Dia pipe line

Snowcem painting including cost and conveyance of all the materials ect complete.

VRCC(1:1.5:3) using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for Roof Slab with75 mm Thick

Cutting open C.C. road surface with concrete saw cutter and removal with Breaker etc including all charges etc complete

VRCC(1:1.5:3) using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for Beams

VCC(1:1.5:3) using 20 mm HBG metal including cost and conveyance of all the materials etc complete for Bed Blocks

Painting With White Cement two coats including cost and conveyance of all the materials ect complete.

Earth work excavation for pipe line trences (2/3 machinery and 1/3 manual) in all soils except rocky soils including lowering, laying and jointing of pipes with required fittings/specials true to alingment and gradient, refilling with already excavated earth, watering, tamping and removing surplus earth and testing to required hydraulic test pressure etc. complete for finished item of work of 1.00 Rmt of HDPE PE-100 6 Kg/Sqcm. 63mm dia HDPE - 6Kg/cm2

Earth work excavation for pipe line trences (2/3 machinery and 1/3 manual) in all soils except rocky soils including lowering, laying and jointing of pipes with required fittings/specials true to alingment and gradient, refilling with already excavated earth, watering, tamping and removing surplus earth and testing to required hydraulic test pressure etc. complete for finished item of work of 1.00 Rmt of HDPE PE-100 6 Kg/Sqcm. 90mm dia HDPE - 6Kg/cm2

CC(1:4:8)using 40 mm HBG metal icluding Cost and conveyance of the all materials etc complete.

VRCC(1:1.5:3) using 20 mm HBG metal including cost and conveyance of all the materials,but excluding the cost of the steel etc complete for Lintel Beams

Accoproof plastering with CM(1:5),12mm thick including cost and conveyance of all the materials ect complete.

Synthatic Enamel painting over primary coat and Enamel painting in two caots including csot and conveyance of all the materials ect complete

VRCC(1:1.5:3) using 20 mm HBG metal for Sun Shades of Size 75 mm thick at one end 50mm other end and 600mm width ,including cost and conveyance of all the materials,but excluding the cost of the steel etc complete

Earth work excavation for pipe line trences (2/3 machinery and 1/3 manual) in all soils except rocky soils including lowering, laying and jointing of pipes with required fittings/specials true to alingment and gradient, refilling with already excavated earth, watering, tamping and removing surplus earth and testing to required hydraulic test pressure etc. complete for finished item of work of 1.00 Rmt of HDPE PE-100 6 Kg/Sqcm. 75mm dia HDPE - 6Kg/cm2