Panchayat Raj Engineering Department Tender

Plain Cement Concrete (1:5:10) proportion (cement: fine aggregate: Coarse aggregate) M5 Grade using 40mm Nominal size SS5 HBG metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)

Randum Rubble Stone Masonary in CM (1:8) prop: (Cement:sand) using Hard Grenite from approved quarry includig cost and conveyance of all materials like Granite stones, Cement, Ssand, water etc. to site including seigniorage charges, sales & other taxes on all material, all operational, incidental, and labour charges such a cutting stones to required size and slope, mixing of cement mortar, constructig masonary,curing etc. complete for finished item of work for Foundation and Basement (APSS No. 601)

Reinforced Cement Concrete M 25 grade Design Mix (Cement : Fine aggregate : Coarse aggregate ) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Footings

Reinforced Cement Concrete M 25 grade Design Mix (Cement : Fine aggregate : Coarse aggregate ) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Pedastals

Reinforced Cement Concrete M 25 grade Design Mix (Cement : Fine aggregate : Coarse aggregate ) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Coloumns

Reinforced Cement Concrete M 25 grade Design Mix (Cement : Fine aggregate : Coarse aggregate ) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Plinthbeam

Filling with Excavated Earth in Foundation tench etc., complete for finished item of work as per technical specification caluse 305.3.9 MORD & 304 MORTH

Reinforced Cement Concrete M 25 grade Nominal Mix (Cement : Fine aggregate : Coarse aggregate ) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Lintels

Reinforced Cement Concrete M 25 grade Nominal Mix (Cement : Fine aggregate : Coarse aggregate ) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Sunshade 0.60 mts wide

Reinforced Cement Concrete M 25 grade Nominal Mix (Cement : Fine aggregate : Coarse aggregate ) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Roof level Beams

Reinforced Cement Concrete M 25 grade Nominal Mix (Cement : Fine aggregate : Coarse aggregate ) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Roof slab 125mm thick

Brick Masonry (1:6) proportion using Fly ash cement solid blocks of size 225X100X60 from appproved source having crushing strength not less than 50 Kg/Sqcm including cost and conveyance of all materialslike cement ,sand ,bricks, water etc., to site , including seignorage charges ,sales and other taxes on all materials and all operational ,incidental and labour charges such as mixing cement mortar, curing scafolding charges, constructing masonary,lift charges,curing etc., complete for finished item of work (APDSS No 501 &504)

Reinforced Brick Masonry walls of 11.5cm in CM (1:3) using Fly ash cement solid blocks of size 225X100X60 from appproved source having crushing strength not less than 50 Kg/Sqcm including cost and conveyance of all materialslike cement ,sand ,bricks, water etc., to site , including seignorage charges ,sales and other taxes on all materials and all operational ,incidental and labour charges such as mixing cement mortar, curing scafolding charges, constructing masonary,lift charges,curing etc., complete for finished item of work (APDSS No 509)

Ornamental ceiling plastering with CM 2 coats ,12mm thick base coat in CM (1:3) thick dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) for Face Walls

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) for External Walls

Providing high yield strength deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1985) of 8mm to 36mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work (APSS No.126) in all floors.

Providing of MS windows, Grills and doors using Mild steel and MS flats and MS sheet(Fe 250 grade as per IS 1786-1985) , cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of welding, and all operational, incidental, and labour charges such as cutting, bending,welding, placing and in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work (APSS No.126) in all floors.

Supply and fixing of Teak Wood Door size 1.70x2.15 with double shutter frame made of well seasoned country wood scantings of size 100x75mm and door shutter with styles & Rails of 100mm wide and 37.50 mm thick and plancks with 37.50mm thick as per approved design with fixtures of 6 Nos of MS 'Z" holdfasts 300mm long brass aldrop-1 no 125mm long All but hinges 6 Nos no, 150mm long AI Tower bolts-2NOs, Brass fancy handles 150mm long 1 Nos. AI handles 150mm long 1Nos. with necessary screws complete including cost and conveyance of all materials and labour charges etc., complete as per specifications(APSS NO.1001&1002)

Providing and fixing factory made uPVC with colour sliding glazed window up to 1.50mm in hight dimension comprising of uPVC multi-Chamberedframe with in-built roller track and sash extruded profile duly reinforced with 1.60+0.2 mm thick galvanized mild steel section made from rollforming process of required length (Shape & Size according to uPVC profile) appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pipe zinc alloy (White powder coated )Touch locks wiht hook, zinc alloy body with single nylonrollers (Weight bearing capacity to be 40 Kg), GI fasteners 100x8 mm size for fixing frame to finished wall and necessary stainless steel screwsetc. profile of frame & including drilling of holes for fixing hardwares and rainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality all complete as per aproved drawing & Direction of Engineer-in-Chief charge inclusive of cost of single/double glass panes wite mesh and silicon sealent Note. For uPVC frame and sash extruded profile minus 5% tolerancein dimension i.e. in depth & Width of profileshall be acceptable. Variation in profile dimension in higher side be accepted. But no extra payment on this acount shall be made. Two track two pannels sliding window made of (small series) Frame 52 x 44 mm & Sash 32 x60 mm both having wall thickness of 1.9 + 0.2 mm and single glazing bead of appropriate dimension. (Area of window up to 1.75 sqm) (BMT-P.80.A)

Flooring with 16 to 18 mm thick High Polished Granite stone set over base coat of CM (1:8) prop. over already laid CC bed/RCC Roof Slab, including cost of seigniorage charges on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

Providing skirting to internal walls to 15 cm height/risers of steps with high polished granite 16 to 18mm thick slab other than black set over base coat of cement mortar CM (1:5) 20 mm thick over already laid CC bed already laid / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including seigniorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630(Parts 1to15) of any colour and finish in all shades and designs set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work.(APSS No.701 & 707)

Flooring (Dadooing) with decorated white back ground or red glazed tiles of size 800x1600 mm long & thickness range b/w 6 to 8 mm, set over base coat of cment mortar (1:6), 12mm thick over CC bed already laid or RCC roof slab including neat cement slurry of honey like consistency spread of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707)

Providing and applying Synthetic plaster putty or equivalent putty cush as birla wall care putty or texture paint or equivelant such as NCL/Saicoat tecture of average 2 to 3 mm thickness over plasteried surface to prepare the surface even and smoothafter throughly brushing the surface to remove all dirt and remains of loose powered materials, applying emery paper sad the surface clean and wipe off loose dust. applying putty/texture pain fitter by putty Knife/muslin pad. air dry for 2-3 house for the surface preparation inclusing cost and conveyance of all materials to work site and all operational, incidental labour charges etc., complete. for finished item of work for external walls excluding cost of access scafolding (BMT-J-40)

Painting to new walls with 2 coats of Synthetic polymer plastic emulsion paint having VOC content less than 50 grams/litre over deco orient base as approved by Engineer-In-Charge, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of work as per APSS 911 for internal walls in all floors. (As per APSS 912) For Internal walls

Painting to new walls with 2 coats of Synthetic polymer plastic emulsion paint having VOC content less than 50 grams/litre over deco orient base as approved by Engineer-In-Charge, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of work as per APSS 911 for internal walls in all floors. (As per APSS 912) For External walls

Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)

Plain Cement Concrete (1:4:8) proportion (cement: fine aggregate: Coarse aggregate) using 40mm size HBG metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)

Plain Cement Concrete M 25 grade Nominal Mix (Cement : Fine aggregate : Coarse aggregate ) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Septic Tank

Masonry work in CM (1:6) proportion using Fly ash cement solid blocks of size 225X100X60 from appproved source having crushing strength not less than 50 Kg/Sqcm for manufacturing of flyash solid blocks using flyash of 80 Kgs cement of 15 Kgs. Gypsum of 5 Kgs. and stone dust including cost and conveyance of all materialslike cement ,sand ,bricks, water etc., to site , including seignorage charges ,sales and other taxes on all materials and all operational ,incidental and labour charges such as mixing cement mortar, curing scafolding charges, constructing masonary,lift charges,curing etc., complete for finished item of work (APDSS No 501 &504)

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound manufactered by reputed manufacturers as approved by Engineer-in-charge at 1kg per bag of cement laid over roof slab when it is green finished smooth with foating coat of neat cement and thread lining at regular intervals of 45cmX45cm including cost of all materials like cement ,sand,water proof compound etc.at site, operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work(APSS No. 901 & 903)

Reinforced Cement Concrete M 25 grade Nominal Mix (Cement : Fine aggregate : Coarse aggregate ) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For 100mm thick slab over Tank

Supply and fixing of 110 mm dia ISI mark PVC SWR pipes of 4 Kg/cm2. Prince/sudhakar or any ISI brand and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site labourchares etc complete for finished item of work at all floor levels. (APSS No.1302 1319 &1326)

Providing high yield strength deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1985) of 8mm to 36mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work (APSS No.126) in all floors.