Oil And Natural Gas Corporation Limited Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Oil And Natural Gas Corporation Limited - ONGC Tender
Civil And Construction
Civil Works Others
Security and Emergency Services
Electrical and Electronics
Electrical Works
Eprocure
Opening Date9 Nov 2024
Closing Soon30 Nov 2024
Tender Amount₹ 4,09,68,067
Costs
EMD
₹ 8,19,362Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_ONGC_213955_1Tender No
KU71C24003Tender Authority
Oil And Natural Gas Corporation Limited ViewPurchaser Address
-Website
http://etenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).
7.5
8587
64406.78
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1.5:3 (1 Cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
126.2
9859
1244315.59
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 Cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
76
11829
899058.72
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 Cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
187.1
12541
2346421.1
Centering and shuttering including strutting, propping etc. and removal of form for all heights: (a) Foundations, footings, bases of columns, etc. for mass concrete
307.22
427
131318.12
Centering and shuttering including strutting, propping etc. and removal of form for all heights: (b)Lintels, beams, plinth beams, girders, bressumers and cantilevers
883.26
802
708975.14
Centering and shuttering including strutting, propping etc. and removal of form for all heights: (c)Columns, Pillars, Piers, Abutments, Posts and Struts
672.4
1047
704554.17
Centering and shuttering including strutting, propping etc. and removal of form for all heights: (d)Weather shade, Chajjas, corbels etc., including edges
710.96
1036
737052.23
Centering and shuttering including strutting, propping etc. and removal of form for all heights: (e)Suspended floors, roofs, landings, balconies and access platform
66
1120
73983.36
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
43435.6
117
5106289.14
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift.
810
213
173048.4
Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : Cement mortar 1:6 (1 cement : 6 coarse sand)
214.8
9913
2129441.28
12 mm cement plaster of mix:1:6 (1 cement: 6 fine sand)
2481.5
363
901653.03
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)
676
417
282209.72
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
473.6
327
155099.26
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing with cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits :50 mm thick
8
2056
16453.76
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)
2833
127
360980.86
Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved manufacturer and of required shade and colour all complete to achieve even shade and colour: New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
1903.5
202
385192.26
White washing with lime to give an even shade : New work (three or more coats)
197.5
42
8405.6
Providing and fixing stainless steel (Grade 304) work made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.
6968.5
841
5866919.52
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
4910
127
628038.1
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required: In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
6836.5
188
1286150.75
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work quality in all shades to give an even shade on a) steel work (item )
883
246
217756.63
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
128.5
263
33861.04
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
26880
19
515558.4
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift up to 1.5 m.All kinds of soil
800
37
29776
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade
825
1163
959590.5
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm
28
72
2021.88
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc.
270
259
70146
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
0.5
3870
1935.43
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
4750
409
1945695
Supplying and stacking at site. Good earth (Locally available Sandy Soil)
276.42
845
233657.83
Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
0.5
9091
4545.77
Providing and laying roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/ cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 m x 2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge
146.6
1711
250876.58
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
99
816
80857.26
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in :Cement mortar 1:4 (1 cement : 4 coarse sand)
28.6
8034
229772.69
52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
30.5
1066
32528.56
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm
152
1693
257375.52
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
31.6
1769
55904.19
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin- charge. Extruded section profile size 48x40 mm
155.3
294
45738.96
Providing and fixing to existing door frames 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).
60
3236
194188.8
Distempering with 1st quality acrylic distemper (ready mixed) havind VOC content less than 50 gram/litre, of approved manufacture and required shade and colour all completed to achieve even shade and colour: New work (two or more coats) over and including water thinnable priming coat with cement primer
374
202
75682.64
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
117.2
1382
161978.6
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm
44
284
12498.2
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
8
7101
56815.6
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern
8
6822
54576.32
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.
8
2048
16386.64
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia
11
113
1245.75
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
8
1752
14021.36
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
11
870
9579.46
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make confirming to IS:8931: 15 mm nominal bore
16
730
11692.64
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms.
8
772
6182.08
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
3
121
364.44
4" (101.6 mm ) Nahany Trap ( Without Jali with inlet)UPVC/SWR Pipe fittings
16
106
1699.2
Y angle 50x50x6
16
40
655.68
U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 75 mm dia
120
80
9679.2
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes
200
298
59798
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter
53
271
14373.07
75 mm dia - Vent Cowl - UPVC/SWR Pipe fittings
8
15
122.72
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.-Circular tank
5000
11
59950
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm NB
14
678
9497.88
Supply of 20mm PPR Ball Valve conforming to DIN Standards 8077/8092
16
201
3228.48
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight earing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealant shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)
77
14389
1107976.87
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm)
94
1282
120574.74
Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
278.8
105
29402.25
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete - 200x10mm
16
108
1738.72
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore
21
625
13145.79
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light ransmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
24
4053
97281.12
Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook of Jaquar make queen series with 7 years warranty Chrome plated
7
4915
34411.16
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
7
1071
7501.41
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design
7
3150
22051.47
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
14
8884
124376.7
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length & 15 mm nominal bore
21
106
2237.55
Half brick masonry with common burnt clay FPS (non modular) bricks of class designation 7.5 in foundations and plinth in: Cement mortar 1:4 (1-cement: 4-coarse sand)
34.5
986
34034.25
Providing and fixing aluminium hanging floor door topper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required complete.colour and shade with necessary screws etc. Twin Rubber stopper
2
78
157.72
Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead.
450
82
37179
Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any iameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
15
93
1398.3
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore
2
504
1008.26
Providing and fixing M.S. rivets of sizes in position.
509
303
154405.15
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size derived from natural source).
31.5
540
17021.66
Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge. (The pipe length inserted in the fitting shall not be measured for payment) : 15.88 mm outer dia pipe
27
458
12367.89
Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). : 500 mm dia piles
70
2946
206257.8
Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). : 450 mm dia piles
77
2483
191217.95
Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
49
805
39451.37
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick).bThe aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with 415 SUB HEAD : 8 - CLADDING WORK aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
474
5466
2591073.6
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
883
73
64874.01
Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead.
14250
40
571567.5
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
129
283
36601.17
Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete.
4
2314
9259.56
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size).
6
7824
46949.04
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
25
9859
246496.75
Centering and shuttering including strutting, propping etc. and removal of form for all heights:Foundations, footings, bases of columns, etc. for mass concrete
80
427
34195.2
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
2025
117
238059
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
131
213
27986.84
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
100
127
12791
Painting two or more coats on new work with synthetic enamel paint of approved quality in all shades to give an even shade on a) steel work (item )
680
246
167694.8
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
25
3870
96771.5
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
161
105
17057.95
Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
93.2
805
75038.12
Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.
10600
4
44520
Extra for marking of structural steel work required to be re-erected.
10600
5
53742
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet
44
179
7911.2
Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Up to 10 mm thick
23
66
1529.27
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
300
19
5754
Supplying and fixing 100 Amps rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
1337
1337.43
Supply and fixing of 8 Way SPN DB with IP 43 Protection suitable for 6 Nos S.P out goings and for 1 No Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3.
Makes: ABB/Standard / Havells-euro II / HPL (Techno) /Indo Asian / C&S / L&T/GM /Gold Medal/Anchor/Salzer
1
1382
1382
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 3.5 Core 25 sqmm size armoured copper cable
30
1061
31854.6
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 3.5 core 25 sqmm armoured copper cable direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
20
421
8436.6
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 3.5 core 25 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
10
59
599.5
Supplying and making end termination with brass compression gland and copper lugs for 3.5 Core 25 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
2
341
682.34
Supply & fixing of (8 +18) 6 Way TPN DB Horizontal with IP 43 Protection suitable for 18 Nos S.P. out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. .
Makes: Milltec /Benlo / Vimal /Precision/Amron
1
2884
2884
Supplying and fixing of 63A FP MCB 10KA C/D Curve ISI Mark.
Makes: ABB- S200/Standard / Havells-euro II / HPL (Techno) / Indo Asian
1
1719
1719
Supplying and fixing 16 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Double pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
6
715
4290.24
Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 4 sq. mm + 1 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
50
364
18203
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
6
638
3832.44
Supply & fixing of (8 +12) 4 Way TPN DB Horizontal with IP 43, Protection suitable for installation of 12 Nos S.P out going MCBs andand for 1 No 4 pole, MCB/Isolator incomer along with provision for 1 No of 4 Pole RCCB/ELCB etc., complete as per IS 8623; IS 13032; IEC 61439-3.
Makes: ABB/Standard / Havells-euro II / HPL (Techno) / Indo Asian / C&S / L&T/GM /Gold Medal/Anchor/Salzer.
1
2884
2884
Supplying and fixing 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of 04 poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Makes: ABB- S200/Standard / Havells-euro II / HPL (Techno) / Indo Asian / C&S /L&T-Exora/ GM /Gold Medal/Anchor/Salzer
1
1238
1238
Supplying and fixing 16 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Double pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
6
1338
8031.12
Supplying and fixing 10 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
4
715
2860.16
Supplying and drawing 3 x 2.5 sq. mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
80
149
11946.4
Supplying and fixing of 32 mm sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
80
200
16044.8
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required: Group-A
6
1082
6494.22
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required: Group-B
6
1264
7586.4
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required: 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
10
299
2997.5
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required: 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
20
253
5079.4
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
6
519
3119.58
Supply of LED tub light (Complete set): 140-270 volt, 18W / 20W
8
165
1320
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
8
224
1796.32
Supply of Ceiling Fan (single phase, 230 V, 1200 mm sweep, 300 RPM)
4
2155
8622.44
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
4
232
928.68
Supply of 240 Watt LED Flood lights Power Factor: ≥0.9 at full load
CRI (Colour Rendering Index): ≥70
CCT (Correlated Colour Temp): 5700 to 6500K
Surge Protection Device: Internal ≥ 5KV, External ≥ 10KV.
Ingress of Protection: IP66, IP67
Voltage Range: 110-320V
Driver Efficiency: 85%
System Efficiecncy: ≥90 Lumen/Watt
9
5546
49914
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
9
224
2020.86
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
7471
14943.9
Supplying and fixing 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
1338
1338.52
Supply and fixing of 8 Way SPN DB with IP 43,Protection suitable for 6 Nos S.P out goings and for 1 No Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . .
Makes: ABB/Standard / Havells-euro II / HPL (Techno) / Indo Asian / C&S / L&T/GM /Gold Medal/Anchor/Salzer
2
1382
2764
Wiring for circuit/ submain wiring alongwith earth wire with the2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
13
402
5228.73
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 4 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
20
59
1199
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 4 Core 4 sqmm size armoured copper cable
30
173
5190
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 4 sqmm armoured copper cable direct in ground / Road crosing including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
10
421
4218.3
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
2
553
1107.44
Supplying and making end termination with brass compression gland and copper lugs for 4 Core 4 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
2
262
525.38
Supplying and fixing 16 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Double pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
3
715
2145.12
Supplying and fixing 10 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
35W integral wellglass weather proof pole mount LED luminaire
Power rating- 35W
Ingress of Protection: IP66
working volt 120 V AC - 300 V AC
Color Temperature (CCT) +::- 500 K (in Kelvin) : 5700 to 6500
LED Life : ≥ 50000 Hours
13. Power Factor (PF) : ≥ 0.90
3
895
2685
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 3 core 2.5 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
50
59
2997.5
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 3 Core 2.5 sqmm size armoured copper cable
50
122
6125.5
Supplying and making end termination with brass compression gland and copper lugs for 3 Core 2.5 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
8
262
2101.52
High intensity LED revolving search light, Manually operated, suitable for mounting on platform of watch tower. It is made by steel & suitable for manual rotation of the light on the horizontally (more than 360˚) and vertically (more than 45˚) with provision of both locking arrangement at desired position.
Power rating- 150W to 300W
working volt 120 V AC - 300 V AC
Beam Range- 400 to 700 meters
Ingress of Protection: IP66
high lumen LED 140 lm/w
optical grade PMMA/PC lens reflector
1
17600
17600
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
4
224
898.16
Supply of LED tub light : 140-270 volt, 18W / 20W bulb (suitable to replace T-5/T-8/T-12 tube lights),Min 1800 Lm,IP20,CRI : 80,CCT :6000K (Cool white), Length :4 feet with baton
2
165
330
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
4
2011
8044.2
Supply of Ceiling Fan (single phase, 230 V, 1200 mm sweep, 300 RPM)
2
2155
4311.22
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
2
232
464.34
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
3
519
1559.79
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
7471
14943.9
Supplying and fixing 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Triple Pole neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
1338
1338.52
Supplying and fixing 16 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Double pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
3
715
2145.12
Supplying and fixing 10 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
Supply and fixing of 12 Way SPN DB with IP 43,Protection suitable for 10 Nos S.P out goings and for 1 No Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . .
Makes: ABB/Standard / Havells-euro II / HPL (Techno) /Indo Asian / C&S / L&T/GM /Gold Medal/Anchor/Salzer
1
1623
1623
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 4 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
20
59
1199
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 4 Core 4 sqmm size armoured copper cable
70
173
12110
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 4 sqmm armoured copper cable direct in ground / Road crosing including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
50
421
21091.5
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
2
553
1107.44
Supplying and making end termination with brass compression gland and copper lugs for 4 Core 4 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
2
262
525.38
35W integral wellglass weather proof pole mount LED luminaire
Power rating- 35W
Ingress of Protection: IP66
working volt 120 V AC - 300 V AC
Color Temperature (CCT) +::- 500 K (in Kelvin) : 5700 to 6500
LED Life : ≥ 50000 Hours
13. Power Factor (PF) : ≥ 0.90
3
895
2685
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 3 core 2.5 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
50
59
2997.5
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 3 Core 2.5 sqmm size armoured copper cable
50
122
6125.5
Supplying and making end termination with brass compression gland and copper lugs for 3 Core 2.5 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
8
262
2101.52
High intensity LED revolving search light, Manually operated, suitable for mounting on platform of watch tower. It is made by steel & suitable for manual rotation of the light on the horizontally (more than 360˚) and vertically (more than 45˚) with provision of both locking arrangement at desired position.
Power rating- 150W to 300W
working volt 120 V AC - 300 V AC
Beam Range- 400 to 700 meters
Ingress of Protection: IP66
high lumen LED 140 lm/w
optical grade PMMA/PC lens reflector
1
17600
17600
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
4
224
898.16
Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
20
402
8044.2
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
4
2011
8044.2
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
3
519
1559.79
Supply of LED tub light : 140-270 volt, 18W / 20W bulb (suitable to replace T-5/T-8/T-12 tube lights),Min 1800 Lm,IP20,CRI : 80,CCT :6000K (Cool white), Length :4 feet with baton
2
165
330
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
2
224
449.08
Supply of Ceiling Fan (single phase, 230 V, 1200 mm sweep, 300 RPM)
2
2155
4311.22
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
2
232
464.34
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
7471
14943.9
Supplying and fixing 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Triple Pole neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
1338
1338.52
Supply and fixing of 8 Way SPN DB with IP 43,Protection suitable for 6 Nos S.P out goings and for 1 No Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . .
Makes: ABB/Standard / Havells-euro II / HPL (Techno) / Indo Asian / C&S / L&T/GM /Gold Medal/Anchor/Salzer
2
1382
2764
Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 6 sq. mm + 1 X 6 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
1
642
642.01
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 4 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
25
59
1498.75
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 4 Core 4 sqmm size armoured copper cable
25
173
4325
Supplying and making end termination with brass compression gland and copper lugs for 4 Core 4 sqmm size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 kV grade as required.
2
262
525.38
Supplying and fixing 16 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
Supplying and fixing 10 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 4 sq. mm + 1 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
25
466
11663
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
6
1621
9731.52
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
4
2011
8044.2
Supply of LED tub light (Complete set): 140-270 volt, 18W / 20W
6
165
990
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
6
224
1347.24
Supply of Ceiling Fan (single phase, 230 V, 1200 mm sweep, 300 RPM)
2
2155
4311.22
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
2
232
464.34
Supply of 9" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT.
1
1552
1552
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
1
490
490.5
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
3
519
1559.79
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
1
638
638.74
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
7471
14943.9
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 4 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
25
59
1498.75
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 4 sqmm armoured copper cable direct in ground / Road crosing including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
25
421
10545.75
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 4 Core 4 sqmm size armoured copper cable
50
173
8650
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
2
553
1107.44
Supplying and making end termination with brass compression gland and copper lugs for 4 X 4 sq. mm size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 kV grade as required.
2
262
525.38
Supplying and fixing 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
1338
1338.52
Supplying and fixing 10 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
3
715
2145.12
Supplying and fixing 16 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
Supply and fixing of 8 Way SPN DB with IP 43,Protection suitable for 8 Nos S.P out goings and for 1 No Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . .
Makes: ABB/Standard / Havells-euro II / HPL (Techno) / Indo Asian / C&S / L&T/GM /Gold Medal/Anchor/Salzer
1
1623
1623
Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
30
402
12066.3
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
11
1621
17841.12
Supply of LED tub light : 140-270 volt, 18W / 20W bulb (suitable to replace T-5/T-8/T-12 tube lights),Min 1800 Lm,IP20,CRI : 80,CCT :6000K (Cool white), Length :4 feet with baton
8
165
1320
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
8
224
1796.32
Supply of Ceiling Fan (single phase, 230 V, 1200 mm sweep, 300 RPM)
2
2155
4311.22
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
2
232
464.34
Supply of 9" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT.
1
1552
1552
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
1
490
490.5
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
5
519
2599.65
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
7471
14943.9
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 16 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
50
59
2997.5
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 16 sqmm armoured copper cable direct in ground / Road crosing including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
200
421
84366
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 4 Core 16 sqmm size armoured copper cable
250
551
137812.5
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
10
553
5537.2
Supplying and making end termination with brass compression gland and copper lugs for 4 X 16 sq. mm size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 kV grade as required.
2
341
682.34
Supplying and fixing 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
1338
1338.52
Supplying and fixing 16 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
3
279
837.12
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 3 Core 2.5 sqmm size armoured copper cable
20
122
2450.2
Supplying and making end termination with brass compression gland and copper lugs for 3 Core 2.5 sqmm size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 kV grade as required.
2
262
525.38
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 3 core 2.5 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
5
59
299.75
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size3 core 2.5 sqmm armoured copper cable direct in ground / Road crosing including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
15
421
6327.45
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
2
553
1107.44
Supply and fixing of 12 Way SPN DB with IP 43,Protection suitable for 10 Nos S.P out goings and for 1 No Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . .
Makes: ABB/Standard / Havells-euro II / HPL (Techno) / Indo Asian / C&S / L&T/GM /Gold Medal/Anchor/Salzer
1
1623
1623
Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
5
402
2011.05
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
5
1621
8109.6
Supply of LED tub light : 140-270 volt, 18W / 20W bulb (suitable to replace T-5/T-8/T-12 tube lights),Min 1800 Lm,IP20,CRI : 80,CCT :6000K (Cool white), Length :4 feet with baton
2
165
330
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
2
224
449.08
Supply of Ceiling Fan (single phase, 230 V, 1200 mm sweep, 300 RPM)
2
2155
4311.22
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
2
232
464.34
Supply of 9" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT.
1
1552
1552
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
1
490
490.5
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
3
519
1559.79
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
7471
14943.9
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 3.5 Core 50 sqmm size armoured aluminium cable
550
245
135113
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 3.5 core 50 sqmm armoured aluminium cable direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
50
441
22072.5
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 3.5 core 50 sqmm armoured aluminium cable on wall surface as required.
500
141
70850
Supplying and making end termination with brass compression gland and copper lugs for 3.5 Core 50 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
2
450
900.34
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) of size 60 cm X 60 cm at the bottom and 50cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
23
553
12735.56
Supplying and fixing 63 Amps rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
1127
1127.06
Supply and fixing of 12 Way SPN DB with IP 43,Protection suitable for 10 Nos S.P out goings and for 1 No Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . .
Makes: ABB/Standard / Havells-euro II / HPL (Techno) / Indo Asian / C&S / L&T/GM /Gold Medal/Anchor/Salzer
1
1623
1623
Supply and fixing of 4 Way VTPN MCCB DB with IP54 (weather proof) Protection suitable for accommodating 125A / 160A 4 Pole MCCB as incomer and TP/SP MCBs as outgoings etc., as per IS 8623; IS 13032; IEC 61439-3.
1
10840
10840
Providing and fixing 125Amps,30KA, 4 pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
1
8947
8947.81
Supplying and fixing 6 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Double pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
3
715
2145.12
Supplying and fixing 16 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Double pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
715
715.04
Supplying and fixing 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Double pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
715
715.04
Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit asrequired.
50
299
14987.5
Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 4 sq. mm + 1 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit asrequired.
20
364
7281.2
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
6
1621
9731.52
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
4
638
2554.96
Supply of LED tub light (Complete set): 140-270 volt, 18W / 20W
4
165
660
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
4
224
898.16
Supply of Ceiling Fan (single phase, 230 V, 1200 mm sweep, 300 RPM)
1
2155
2155.61
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
1
232
232.17
Supply of 9" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT.
1
1552
1552
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
1
490
490.5
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
7471
14943.9
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 35 sqmm armoured aluminium cable (clamped with 1mm thick saddle) on wall surface as required.
200
59
11990
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 35 sqmm armoured aluminium cable direct in ground / Road crosing including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
50
421
21091.5
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 4 Core 35 sqmm size armoured aluminium cable
250
178
44710
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
2
553
1107.44
Supplying and making end termination with brass compression gland and copper lugs for 4 X 35 sq. mm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
2
403
806.6
Supplying and fixing 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
1338
2677.04
Supplying and fixing 16 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
3
279
837.12
Supplying and fixing 10 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
1
4459
4459.19
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 3 core 2.5 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
40
59
2398
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 3 Core 2.5 sqmm size armoured copper cable
40
122
4900.4
Supplying and making end termination with brass compression gland and copper lugs for 3 Core 2.5 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
10
262
2626.9
35W integral wellglass weather proof pole mount LED luminaire
Power rating- 35W
Ingress of Protection: IP66
working volt 120 V AC - 300 V AC
Color Temperature (CCT) +::- 500 K (in Kelvin) : 5700 to 6500
LED Life : ≥ 50000 Hours
13. Power Factor (PF) : ≥ 0.90
5
895
4475
High intensity LED revolving search light, Manually operated, suitable for mounting on platform of watch tower. It is made by steel & suitable for manual rotation of the light on the horizontally (more than 360˚) and vertically (more than 45˚) with provision of both locking arrangement at desired position.
Power rating- 150W to 300W
working volt 120 V AC - 300 V AC
Beam Range- 400 to 700 meters
Ingress of Protection: IP66
high lumen LED 140 lm/w
optical grade PMMA/PC lens reflector
1
17600
17600
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
6
224
1347.24
Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
20
402
8044.2
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
1
2011
2011.05
Supply of Ceiling Fan (single phase, 230 V, 1200 mm sweep, 300 RPM)
1
2155
2155.61
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
1
232
232.17
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
3
519
1559.79
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
7471
14943.9
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 35 sqmm armoured aluminium cable (clamped with 1mm thick saddle) on wall surface as required.
600
59
35970
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 35 sqmm armoured aluminium cable direct in ground / Road crosing including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
50
421
21091.5
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
2
553
1107.44
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 4 Core 35 sqmm size armoured aluminium cable
650
178
116246
Supplying and making end termination with brass compression gland and copper lugs for 4 X 35sq. mm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
2
403
806.6
Supplying and fixing 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
1338
2677.04
Supplying and fixing 16 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
3
279
837.12
Supplying and fixing 10 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
1
4459
4459.19
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 3 core 2.5 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
40
59
2398
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 3 Core 2.5 sqmm size armoured copper cable
40
122
4900.4
Supplying and making end termination with brass compression gland and copper lugs for 3 Core 2.5 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
12
262
3152.28
35W integral wellglass weather proof pole mount LED luminaire
Power rating- 35W
Ingress of Protection: IP66
working volt 120 V AC - 300 V AC
Color Temperature (CCT) +::- 500 K (in Kelvin) : 5700 to 6500
LED Life : ≥ 50000 Hours
13. Power Factor (PF) : ≥ 0.90
5
895
4475
High intensity LED revolving search light, Manually operated, suitable for mounting on platform of watch tower. It is made by steel & suitable for manual rotation of the light on the horizontally (more than 360˚) and vertically (more than 45˚) with provision of both locking arrangement at desired position.
Power rating- 150W to 300W
working volt 120 V AC - 300 V AC
Beam Range- 400 to 700 meters
Ingress of Protection: IP66
high lumen LED 140 lm/w
optical grade PMMA/PC lens reflector
1
17600
17600
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
6
224
1347.24
Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
20
402
8044.2
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
1
2011
2011.05
Supply of Ceiling Fan (single phase, 230 V, 1200 mm sweep, 300 RPM)
1
2155
2155.61
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
1
232
232.17
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
3
519
1559.79
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
7471
14943.9
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 35 sqmm armoured aluminium cable (clamped with 1mm thick saddle) on wall surface as required.
300
59
17985
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 35 sqmm armoured aluminium cable direct in ground / Road crosing including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
50
421
21091.5
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
2
553
1107.44
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 4 Core 35 sqmm size armoured aluminium cable
350
178
62594
Supplying and making end termination with brass compression gland and copper lugs for 4 X 35 sq. mm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
2
403
806.6
Supplying and fixing 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
1338
1338.52
Supplying and fixing 16 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
3
279
837.12
Supplying and fixing 10 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
1
4459
4459.19
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 3 core 2.5 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
40
59
2398
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 3 Core 2.5 sqmm size armoured copper cable
40
122
4900.4
Supplying and making end termination with brass compression gland and copper lugs for 3 Core 2.5 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
12
262
3152.28
35W integral wellglass weather proof pole mount LED luminaire
Power rating- 35W
Ingress of Protection: IP66
working volt 120 V AC - 300 V AC
Color Temperature (CCT) +::- 500 K (in Kelvin) : 5700 to 6500
LED Life : ≥ 50000 Hours
13. Power Factor (PF) : ≥ 0.90
5
895
4475
High intensity LED revolving search light, Manually operated, suitable for mounting on platform of watch tower. It is made by steel & suitable for manual rotation of the light on the horizontally (more than 360˚) and vertically (more than 45˚) with provision of both locking arrangement at desired position.
Power rating- 150W to 300W
working volt 120 V AC - 300 V AC
Beam Range- 400 to 700 meters
Ingress of Protection: IP66
high lumen LED 140 lm/w
optical grade PMMA/PC lens reflector
1
17600
17600
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
6
224
1347.24
Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
20
402
8044.2
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
1
2011
2011.05
Supply of Ceiling Fan (single phase, 230 V, 1200 mm sweep, 300 RPM)
1
2155
2155.61
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
1
232
232.17
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
3
519
1559.79
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
7471
14943.9
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 4 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
70
59
4196.5
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 4 sqmm armoured copper cable direct in ground / Road crosing including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
30
421
12654.9
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
2
553
1107.44
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 4 Core 4 sqmm size armoured copper cable
100
173
17300
Supplying and making end termination with brass compression gland and copper lugs for 4 X 4sq. mm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
2
279
558.08
Supplying and fixing 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
1338
1338.52
Supplying and fixing 16 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
Supplying and fixing 10 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
1
4459
4459.19
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 3 core 2.5 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
15
59
899.25
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 3 Core 2.5 sqmm size armoured copper cable
15
122
1837.65
Supplying and making end termination with brass compression gland and copper lugs for 3 Core 2.5 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
2
262
525.38
High intensity LED revolving search light, Manually operated, suitable for mounting on platform of watch tower. It is made by steel & suitable for manual rotation of the light on the horizontally (more than 360˚) and vertically (more than 45˚) with provision of both locking arrangement at desired position.
Power rating- 150W to 300W
working volt 120 V AC - 300 V AC
Beam Range- 400 to 700 meters
Ingress of Protection: IP66
high lumen LED 140 lm/w
optical grade PMMA/PC lens reflector
1
17600
17600
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
1
224
224.54
Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
20
402
8044.2
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
1
2011
2011.05
Supply of Ceiling Fan (single phase, 230 V, 1200 mm sweep, 300 RPM)
1
2155
2155.61
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
1
232
232.17
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
3
519
1559.79
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
7471
14943.9
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 35 sqmm armoured aluminium cable (clamped with 1mm thick saddle) on wall surface as required.
250
59
14987.5
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 4 Core 35 sqmm size armoured aluminium cable
250
178
44710
Supplying and making end termination with brass compression gland and copper lugs for 4 X 35 sq. mm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
2
403
806.6
Supplying and fixing 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
1338
2677.04
Supplying and fixing 16 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
Supplying and fixing 10 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
1
4459
4459.19
Supply and fixing of 4 Way VTPN MCCB DB withIP54 (weather proof) Protection suitable for accommodating 125A / 160A 4 Pole MCCB as incomer and TP/SP MCBs as outgoings etc., as per IS 8623; IS 13032; IEC 61439-3.
1
10840
10840
Providing and fixing 125Amps,30KA, 4 pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
1
8947
8947.81
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 3 core 2.5 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
15
59
899.25
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 3 Core 2.5 sqmm size armoured copper cable
15
122
1837.65
Supplying and making end termination with brass compression gland and copper lugs for 3 Core 2.5 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
2
262
525.38
High intensity LED revolving search light, Manually operated, suitable for mounting on platform of watch tower. It is made by steel & suitable for manual rotation of the light on the horizontally (more than 360˚) and vertically (more than 45˚) with provision of both locking arrangement at desired position.
Power rating- 150W to 300W
working volt 120 V AC - 300 V AC
Beam Range- 400 to 700 meters
Ingress of Protection: IP66
high lumen LED 140 lm/w
optical grade PMMA/PC lens reflector
1
17600
17600
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
1
224
224.54
Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
20
402
8044.2
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
1
2011
2011.05
Supply of Ceiling Fan (single phase, 230 V, 1200 mm sweep, 300 RPM)
1
2155
2155.61
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
1
232
232.17
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
3
519
1559.79
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
7471
14943.9
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 6 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
50
59
2997.5
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 6 sqmm armoured copper cable direct in ground / Road crosing including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
200
421
84366
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
6
553
3322.32
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 4 Core 6 sqmm size armoured copper cable
250
619
154875
Supplying and making end termination with brass compression gland and copper lugs for 4 X 6 sq. mm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
2
280
560.26
Supplying and fixing 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
1338
1338.52
Supplying and fixing 16 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
Supplying and fixing 10 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
1
4459
4459.19
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 3 core 2.5 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
15
59
899.25
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 3 Core 2.5 sqmm size armoured copper cable
15
122
1837.65
Supplying and making end termination with brass compression gland and copper lugs for 3 Core 2.5 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
2
262
525.38
High intensity LED revolving search light, Manually operated, suitable for mounting on platform of watch tower. It is made by steel & suitable for manual rotation of the light on the horizontally (more than 360˚) and vertically (more than 45˚) with provision of both locking arrangement at desired position.
Power rating- 150W to 300W
working volt 120 V AC - 300 V AC
Beam Range- 400 to 700 meters
Ingress of Protection: IP66
high lumen LED 140 lm/w
optical grade PMMA/PC lens reflector
1
17600
17600
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
1
224
224.54
Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
20
402
8044.2
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
1
2011
2011.05
Supply of Ceiling Fan (single phase, 230 V, 1200 mm sweep, 300 RPM)
1
2155
2155.61
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
1
232
232.17
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
3
519
1559.79
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
7471
14943.9
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 6 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
50
59
2997.5
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 6 sqmm armoured copper cable direct in ground / Road crosing including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
250
421
105457.5
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
10
553
5537.2
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 4 Core 6 sqmm size armoured copper cable
300
619
185850
Supplying and making end termination with brass compression gland and copper lugs for 4 X 6 sq. mm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
2
280
560.26
Supplying and fixing 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
1338
1338.52
Supplying and fixing 16 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
Supplying and fixing 10 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
1
4459
4459.19
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 3 core 2.5 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
15
59
899.25
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 3 Core 2.5 sqmm size armoured copper cable
15
122
1837.65
Supplying and making end termination with brass compression gland and copper lugs for 3 Core 2.5 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
2
262
525.38
High intensity LED revolving search light, Manually operated, suitable for mounting on platform of watch tower. It is made by steel & suitable for manual rotation of the light on the horizontally (more than 360˚) and vertically (more than 45˚) with provision of both locking arrangement at desired position.
Power rating- 150W to 300W
working volt 120 V AC - 300 V AC
Beam Range- 400 to 700 meters
Ingress of Protection: IP66
high lumen LED 140 lm/w
optical grade PMMA/PC lens reflector
1
17600
17600
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
1
224
224.54
Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
20
402
8044.2
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
1
2011
2011.05
Supply of Ceiling Fan (single phase, 230 V, 1200 mm sweep, 300 RPM)
1
2155
2155.61
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
1
232
232.17
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
3
519
1559.79
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
7471
14943.9
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 35 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
220
59
13189
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 4 Core 35 sqmm size armoured aluminium cable
220
178
39344.8
Supplying and making end termination with brass compression gland and copper lugs for 4 X 35 sq. mm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
2
403
806.6
Supplying and fixing 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
1338
2677.04
Supplying and fixing 16 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
3
279
837.12
Supplying and fixing 10 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
1
4459
4459.19
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 3 core 2.5 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
40
59
2398
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 3 Core 2.5 sqmm size armoured copper cable
40
122
4900.4
Supplying and making end termination with brass compression gland and copper lugs for 3 Core 2.5 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
12
262
3152.28
35W integral wellglass weather proof pole mount LED luminaire
Power rating- 35W
Ingress of Protection: IP66
working volt 120 V AC - 300 V AC
Color Temperature (CCT) +::- 500 K (in Kelvin) : 5700 to 6500
LED Life : ≥ 50000 Hours
13. Power Factor (PF) : ≥ 0.90
5
895
4475
High intensity LED revolving search light, Manually operated, suitable for mounting on platform of watch tower. It is made by steel & suitable for manual rotation of the light on the horizontally (more than 360˚) and vertically (more than 45˚) with provision of both locking arrangement at desired position.
Power rating- 150W to 300W
working volt 120 V AC - 300 V AC
Beam Range- 400 to 700 meters
Ingress of Protection: IP66
high lumen LED 140 lm/w
optical grade PMMA/PC lens reflector
1
17600
17600
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
6
224
1347.24
Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
20
402
8044.2
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
4
2011
8044.2
Supply of LED tub light (Complete set): 140-270 volt, 18W / 20W
2
165
330
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
2
224
449.08
Supply of Ceiling Fan (single phase, 230 V, 1200 mm sweep, 300 RPM)
1
2155
2155.61
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
1
232
232.17
Supply of 9" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT.
1
1552
1552
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
1
490
490.5
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
3
519
1559.79
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
7471
14943.9
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 35 sqmm armoured aluminium cable (clamped with 1mm thick saddle) on wall surface as required.
860
59
51557
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 4 Core 35 sqmm size armoured aluminium cable
860
178
153802.4
Supplying and making end termination with brass compression gland and copper lugs for 4 X 35sq. mm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
2
403
806.6
Supplying and fixing 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
1338
1338.52
Supplying and fixing 16 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
3
279
837.12
Supplying and fixing 10 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
1
4459
4459.19
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 3 core 2.5 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
40
59
2398
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 3 Core 2.5 sqmm size armoured copper cable
40
122
4900.4
Supplying and making end termination with brass compression gland and copper lugs for 3 Core 2.5 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
12
262
3152.28
35W integral wellglass weather proof pole mount LED luminaire
Power rating- 35W
Ingress of Protection: IP66
working volt 120 V AC - 300 V AC
Color Temperature (CCT) +::- 500 K (in Kelvin) : 5700 to 6500
LED Life : ≥ 50000 Hours
13. Power Factor (PF) : ≥ 0.90
5
895
4475
High intensity LED revolving search light, Manually operated, suitable for mounting on platform of watch tower. It is made by steel & suitable for manual rotation of the light on the horizontally (more than 360˚) and vertically (more than 45˚) with provision of both locking arrangement at desired position.
Power rating- 150W to 300W
working volt 120 V AC - 300 V AC
Beam Range- 400 to 700 meters
Ingress of Protection: IP66
high lumen LED 140 lm/w
optical grade PMMA/PC lens reflector
1
17600
17600
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
6
224
1347.24
Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
20
402
8044.2
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
4
2011
8044.2
Supply of LED tub light (Complete set): 140-270 volt, 18W / 20W
2
165
330
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
2
224
449.08
Supply of Ceiling Fan (single phase, 230 V, 1200 mm sweep, 300 RPM)
1
2155
2155.61
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
1
232
232.17
Supply of 9" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT.
1
1552
1552
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
1
490
490.5
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
3
519
1559.79
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
7471
14943.9
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 35 sqmm armoured aluminium cable (clamped with 1mm thick saddle) on wall surface as required.
350
59
20982.5
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 4 Core 35 sqmm size armoured aluminium cable
350
178
62594
Supplying and making end termination with brass compression gland and copper lugs for 4 X 35 sq. mm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
2
403
806.6
Supplying and fixing 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
1338
1338.52
Supplying and fixing 16 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
3
279
837.12
Supplying and fixing 10 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
1
4459
4459.19
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 3 core 2.5 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
40
59
2398
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 3 Core 2.5 sqmm size armoured copper cable
40
122
4900.4
Supplying and making end termination with brass compression gland and copper lugs for 3 Core 2.5 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
12
262
3152.28
35W integral wellglass weather proof pole mount LED luminaire
Power rating- 35W
Ingress of Protection: IP66
working volt 120 V AC - 300 V AC
Color Temperature (CCT) +::- 500 K (in Kelvin) : 5700 to 6500
LED Life : ≥ 50000 Hours
13. Power Factor (PF) : ≥ 0.90
5
895
4475
High intensity LED revolving search light, Manually operated, suitable for mounting on platform of watch tower. It is made by steel & suitable for manual rotation of the light on the horizontally (more than 360˚) and vertically (more than 45˚) with provision of both locking arrangement at desired position.
Power rating- 150W to 300W
working volt 120 V AC - 300 V AC
Beam Range- 400 to 700 meters
Ingress of Protection: IP66
high lumen LED 140 lm/w
optical grade PMMA/PC lens reflector
1
17600
17600
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
6
224
1347.24
Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
20
402
8044.2
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
4
2011
8044.2
Supply of LED tub light (Complete set): 140-270 volt, 18W / 20W
2
165
330
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
2
224
449.08
Supply of Ceiling Fan (single phase, 230 V, 1200 mm sweep, 300 RPM)
1
2155
2155.61
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
1
232
232.17
Supply of 9" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT.
1
1552
1552
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
1
490
490.5
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
3
519
1559.79
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
7471
14943.9
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 4 core 35 sqmm armoured aluminium cable (clamped with 1mm thick saddle) on wall surface as required.
560
59
33572
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 4 Core 35 sqmm size armoured aluminium cable
560
178
100150.4
Supplying and making end termination with brass compression gland and copper lugs for 4 X 35 sq. mm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
2
403
806.6
Supplying and fixing 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
1338
2677.04
Supplying and fixing 16 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
3
279
837.12
Supplying and fixing 10 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
279
558.08
Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
1
4459
4459.19
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size 3 core 2.5 sqmm armoured copper cable (clamped with 1mm thick saddle) on wall surface as required.
40
59
2398
Supply of PVC sheathed / XLPE power cable of 1.1 kV grade of 3 Core 2.5 sqmm size armoured copper cable
40
122
4900.4
Supplying and making end termination with brass compression gland and copper lugs for 3 Core 2.5 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
12
262
3152.28
High intensity LED revolving search light, Manually operated, suitable for mounting on platform of watch tower. It is made by steel & suitable for manual rotation of the light on the horizontally (more than 360˚) and vertically (more than 45˚) with provision of both locking arrangement at desired position.
Power rating- 150W to 300W
working volt 120 V AC - 300 V AC
Beam Range- 400 to 700 meters
Ingress of Protection: IP66
high lumen LED 140 lm/w
optical grade PMMA/PC lens reflector
1
17600
17600
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
6
224
1347.24
Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
20
402
8044.2
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular
switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
4
2011
8044.2
Supply of LED tub light (Complete set): 140-270 volt, 18W / 20W
2
165
330
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED light fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
2
224
449.08
Supply of Ceiling Fan (single phase, 230 V, 1200 mm sweep, 300 RPM)
1
2155
2155.61
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
1
232
232.17
Supply of 9" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT.
1
1552
1552
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
1
490
490.5
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
3
519
1559.79
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
7471
14943.9
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%