Oil And Natural Gas Corporation Limited Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Oil And Natural Gas Corporation Limited - ONGC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date7 Oct 2024
Closing Date28 Oct 2024
Tender Amount₹ 4,34,41,990
Costs
EMD
₹ 8,69,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Sheds Office Building
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_ONGC_210424_1Bid Award Id
ViewTender No
KC1BC24002Tender Authority
Oil And Natural Gas Corporation Limited ViewPurchaser Address
-Website
http://etenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete for all lift
231.7
-
766
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 100 m -All kinds of soil.
657.69
-
284.64
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 100 m and for all lift, as directed by Engineer-in-charge.
- All kinds of soil
138.96
-
194.1
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)
236.1
-
7849.96
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
90.13
-
9891.53
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
6883.5
-
117.93
Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete
349.13
-
428.82
Providing and fixing bolts including nuts and washers complete.
1104.62
-
174.25
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
16825.49
-
146.2
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of pproved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
16592.02
-
212.58
Labour charges for Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
12106.06
-
26.71
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
1610.17
-
170.48
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated hickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineering- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
2309.76
-
807.71
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)
85
-
582.12
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gm/m²
68
-
1032.32
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
117.06
-
8059.81
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in uperstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)
112.32
-
10218.05
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift
526.32
-
214.33
Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete.
646.72
-
9398.8
15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand)
305.48
-
418.81
12 mm cement plaster of mix :1:4 (1 cement : 4 fine sand)
645.2
-
379.5
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
1465.91
-
80.86
Finishing walls with water proofing cement paint of required shade:(a) New work ( Two or more coats applied @ 3.84 Kg/10 sqm.
560.6
-
127.83
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia. R.C.C. pipe
25
-
1087.27
Hire charges of 20 TON CRANE
3
-
11764.93
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
187.55
-
2322.32
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources).
20.19
-
542.1
Extra for providing and mixing water proofing material in cement concrete of work in doses by weight of cement as per manufacturer's specification
7
-
19.85
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
20.19
-
159.82
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
107.44
-
85.73
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
152.94
-
9891.53
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
8.84
-
11867.7
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
49.61
-
12581.26
Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size).
0.37
-
12525.33
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete.
1079.26
-
428.82
Centering and shuttering including strutting, propping etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts, and Struts.
126.45
-
1051.18
Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform.
168.07
-
1013.95
Centering and shuttering including strutting, propping etc. and removal of form for:Lintels, beams, plinth beams, girders, bressumers and cantilevers.e)
262.43
-
805.25
Centering and shuttering including strutting, propping etc. and removal of form for: Weather shade, Chajjas, corbels etc., including edges
25.18
-
1040.03
Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide
51.34
-
228.05
Centering and shuttering including strutting, propping etc. and removal of form for: Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards
4.63
-
1417.94
Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size)
5.8
-
11049.93
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
48219.56
-
117.93
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. in : cement mortar 1:4 (1 cement : 4 coarse sand)
25.8
-
1228.88
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
25.8
-
114.6
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels Granite stone slab of colour black, Cherry/Ruby red: Area of slab over 0.50 sqm
7.2
-
5616.54
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screw s or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) : For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
444.39
-
590.33
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screw s or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Polyster Powder coated aluminium (minimum thickness of powder coating 50 micron)
328.34
-
703.61
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in charge Polyster Powder coated minimum thickness 50 micron aluminium
8
-
122.64
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
121.2
-
105.8
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 45 x 70 mm
10
-
771.85
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick
3.36
-
4753.12
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 75x50x2.50 mm
6
-
97.65
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm
2
-
284.97
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm
8
-
109.02
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm
4
-
72.44
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)
32.52
-
1645.99
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge. : Pre-laminated particle board with decorative lamination on both sides
6
-
1219.69
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.With 12 mm mild steel U beading
15.84
-
1342.82
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
5
-
578.3
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
4
-
1075.07
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm thickness
2
-
3087.88
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
4
-
133.02
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
308.61
-
844.62
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
889.6
-
188.74
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
6.37
-
1199.08
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
25.35
-
1386.5
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 600 mm
149.06
-
1601.81
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter
184.3
-
412.69
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter
84.7
-
272.06
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion .(a) Shoe (Plain)110 mm.
6
-
144.18
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion .(a) Shoe (Plain)75 mm.
6
-
101.8
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion (b) Bend 87.5°- 110 mm bend
51
-
164.41
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion (b) Bend 87.5°- 75 mm bend
6
-
115.8
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm.
15
-
406.02
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm.
5
-
404.43
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100mm inlet an 75mm outlet- Sand cast iron S&S as per IS - 3989
8
-
2159.83
Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia
6
-
41.12
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
22.43
-
8794.26
Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.
186.95
-
615.75
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
54.94
-
333.68
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
6
-
326.14
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6)
163.03
-
2551.79
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
2
-
184.09
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
2
-
253.64
6 mm cement plaster to ceiling of mix.1:3 (1 cement : 3 fine sand)
677.77
-
328.54
15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand)
271.84
-
418.81
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
244.66
-
287.26
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm).
246.04
-
175.61
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of
approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
905.31
-
156.15
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.
55
-
819.36
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
1
-
7124.75
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
2
-
2054.91
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
1
-
13200.46
P/F Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm
2
-
1489.13
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
1
-
16401.57
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes
20
-
544.34
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia Pipes
20
-
587.87
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.-25 mm nominal outer dia Pipes
20
-
685.9
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work -25 mm nominal outer dia Pipes
50
-
388.63
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work -32 mm nominal outer dia Pipes
50
-
479.61
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal outer dia Pipes
5
-
366.32
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal outer dia Pipes
5
-
439.09
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 32 mm nominal outer dia Pipes
5
-
567.25
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
1
-
381.8
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. -15 mm nominal bore
1
-
873.65
Providing and fixing brass stop cock of approved quality.(a) 15 mm dia nominal bore
1
-
386.28
Providing and fixing gun metal gate valve with C.I. wheel of approved (a) 25 mm nominal bore quality(Screwed end)
5
-
680.59
Providing and fixing gun metal gate valve with C.I. wheel of approved quality(Screwed end)(b) 32 mm nominal bore
3
-
754.08
Supplying and fixing C.I. cover without frame for manhole.(a) 500 mm diameter C.I. Cover (medium duty) the weight of the cover to be not less than 58 kg.
5
-
3762.95
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.(a) Flexible pipe 40 mm dia.
3
-
130.73
Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore
4
-
106.89
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15mm nominal bore
3
-
628
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet - 150 mm diameter
1
-
243.14
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coatof neat cement complete as per standard design :(a) Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With locally available country bricks.
1
-
8732.24
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
-
29373.49
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
11000
-
12.03
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore
1
-
444.89
Collection and supply and transportation of stone dust / crusher dust at site of work including cost, stacking , spreading etc. complete.
147.28
-
1075.25
Supplying and stacking at site 90 mm to 45 mm size stone aggregate
438.47
-
2294.6
Supplying and stacking at site 63 mm to 45 mm size stone aggregate
337.29
-
1789.02
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .
581.82
-
1144.84
Collection and supply of good quality Gravel including loading transportation,unloading at site of work and stacking to measurable standard gauge stacks etc. complete all as directed by EIC.
193.94
-
443.86
Providing and filling in position bitumen mix filler of proportion 80 kg. of hot bitumen, 1 kg. of cement and 0.25 cubic metre of coarse sand for expansion joints.
7.76
-
30850.48
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.a) 50mm dia
25
-
1146.37
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. b) 40mm dia
25
-
887.81
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.c) 32mm dia
25
-
729.36
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. d) 25mm dia
25
-
603.28
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : a) 50mm dia
2
-
1122.64
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : b) 40mm dia
2
-
903.34
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : c) 32mm dia
2
-
754.08
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : c) 25mm dia
2
-
680.59
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)
127.4
-
7994.85
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Raised and cut pointing
142.8
-
766.6
ELECTRICAL WORKS _ Cable: Supply and transportation of following XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: As per list of recommended brands as category I. The cable shall be laid / fixed under ground at a depth of 900 mm / through pipes / through existing trench / on wall with proper clamping arrangement as per specifications standards drawings and directions. (a) 240 Sq mm X 3.5 core
500
-
1872.66
50 Sq mm X 3.5 core
230
-
477.9
35Sq mm X 3.5 core
40
-
361.08
Cable trench: Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.(a) Above 185 sq. mm and upto 400 sq. mm
150
-
504
Above 35 sq. mm and upto 95 sq. mm
200
-
430.64
Upto 35 sq. mm
30
-
411.5
Cable trench for additional cable: Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required (a) Above 185 sq. mm and upto 400 sq. mm
150
-
378.53
GI Pipe: Supplying and fixing of light class G.I. pipe of 100 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.
6
-
5217.61
GI pipe: Supplying and fixing of light class G.I. pipe of 80 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.
5
-
3834.26
Feeder pillar: 1No I/c 800A, 6Nos outgoing 250A and 1No 3ph 40A contactor with timer circuit with Auto/Manuai switch
1
-
436600
Distribution boards: Supplying, installation, testing & commisioning of 125A 15KA SC for 1 sec capacity Plug In/ tap off box on the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick sheet steel enclosure (IP54) duly powder coated with provision of MCCB/ACB (but without MCCB/ACB) complete etc. as required
1
-
9219.87
DB: Supplying and fixing of 8 way ( 4 + 24 ) double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator).
1
-
6344.71
DB: Supplying and fixing of 4 way ( 4 + 12 ) double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, ppowder painted including earthing etc. as required. (But without MCB / RCCB / Isolator).
2
-
4349.96
MCCB: Providing and fixing 125A MCCB 36KA rating and breaking capacity and FP MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
1
-
8728.63
Supply , fixing , connecting and testing of following MCBs, C/D Curve ISI Mark , 10 KA breaking capacity.
Makes: ABB- S200/Standard / Havells-euro II / C&S /L&T-Exora/ GM /Gold Medal/ Anchor/Salzer / Polycab. (a) 63A FP MCB
6
-
2028.42
6-32A DP MCB
10
-
687.94
6-32 A SP MCB
20
-
226.56
Supply & fixing of 25Amps 4 pole, 415Amps, RCCB up to 300ma sensitivity with single door metal enclosure including connections etc.
2
-
3126.1
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
50
-
247.75
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
300
-
292.41
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
150
-
355.14
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
50
-
801.73
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. (a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
200
-
392.36
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
30
-
982.49
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
60
-
1256.82
Providing, fixing, connecting and testing of 48" ( 1400 mm ) sweep 5 star rated Ceiling fan, with double ball bearings, without fan regulator. Makes: Crompton High speed / Havells Velocity / Bajaj Kassels 50.
15
-
2837.9
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
15
-
392.36
Supply & fixing of 12" (300mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with Mark of makes.
3
-
3903.44
Supplying and fixing of call bell/buzzer working on 230 V Single phase 50 HZ AC supply and connecting there of.
6
-
105.27
Supply and replacement of 4ft 20W,2000Lumen batten type LED tubelight with colour temperature of 6500K,rated voltage:220-240V.Make:a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight.
5
-
322.14
Supply , Transportation & fixing of 36W Recessed / Surface slim LED panel of 600mm x 600mm made of alluminium body with acrylic diffuser, Constant current out put of Driver operatingvoltage range of 150 to 265 Volts AC, Power factor 0.9 high power LEDs having efficacy of 120 lumins/watt, junction temparature less than 85 degrees centigrade and THD is less than 12% etc., complete with applicable manufacturer's warranty.
22
-
3853.88
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
8
-
1723.61
Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
5
-
4366.97
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
25
-
623.09
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required
10
-
92.51
Supply,transportation and fixing of 120W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's System efficacy 110 lm/W and junction temprature 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional Surge protection 10 KV with optics distribution , THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete .Make:a) Luminaire Make : a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green line) / GE-Venture / Crompton(Neo Series) / Bajaj (Edge) / Halonix(Lumos - Super) / Havells (Endura Series) /Capart(Premium)/Greenlites(Hi-Lux) /Polycab/Keselec/ HPL(City Vision)/ Jaquar(Premium)/Eveready/ Surya (Pollux) / FortuneArrt (Leaf) / Rhino(GPSL04) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG
8
-
5900
Lighting poles: Providing and erection of 6 Mtrs long G.I.. Tubular pole (Jindal or Equivalent and ISI marked) 80 mm dia “B” class complete with GI base plate made out of 10 mm thick 300mm x 300mm size plate and with suitable GI pole cap on tubular pole fixed with GI Cross Arm to made out of 35 x 35 x 5 mm for fixing of 200 W LED Flood light fixtures ( provision for fixing of 4 Nos. LED flood light fixtures ) including wiring with 3x1.5 sqmm multi strand copper sheathed cable, Sintex junction box , 1 No. 63 A connnector, 16A, 9Ka DP MCBs. Providing foundation for 6 Meters pole with 1:2:4 cement concrete (3/4” metal to be used) including material. The size of the foundation shall be 60 x 60 x 160 cm deep from base ground level. 4nos of M20 x 700mm long “J” foundation bolts of GI along with template shall be laid along with foundation. The plinth should be properly plastered and color washed. 1 Mt long B class GI pipe shall be laid along with foundation for protecting the incoming and out going 4 x 16 sq.mm aluminium armoured cables.
4
-
13370.8
Supply,transportation and fixing of 200W LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's System efficacy 100lm/W and junction temprature 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV,In house additional Surge protection≥10KV with wide/ Narrow beam optics, THD10% at 110 Volts AC, driver efficiency 90%, , CCT: 3000K - 5700K, minimum CRI70, etc., complete. Make:Wipro / Philips/ GE-Venture / Crompton/ Bajaj /Greenlites / Havells / Capart(Premium)/ Halonix/ Polycab/Keselec/ HPL/ Jaquar/Eveready / Surya (ORION-II)/ FortuneArrt (UFO-S) /Rhino(GPHB02 Series) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG
2
-
11210
Lighting poles(flood lights) : Providing and erection of 6 Mtrs long G.I.. Tubular pole (Jindal or Equivalent and ISI marked) 80 mm dia “B” class complete with base plate made out of 10 mm thick 300mm x 300mm size plate and with suitable pole cap on tubular pole fixed with Cross Arm to made out of 35 x 35 x 5 mm for fixing ( provision for fixing of 4 Nos. of 190 watt / 200 Watt LED Flood light fixtures) including wiring with 3x1.5 sq.mm multi strand copper sheathed cable, Sintex junction box ,16A, 9Ka DP MCB, 63A connector. Providing foundation for 6 Meters pole with 1:2:4 cement concrete (3/4” metal to be used) including material. The size of the foundation shall be 60 x 60 x 160 cm deep from base ground level. 4nos of M20 x 700mm long “J” foundation bolts of GI along with template shall be laid along with foundation. The plinth should be properly plastered and color washed. 1 Mt long B class GI pipe shall be laid along with foundation for protecting the incoming and out going 4 x 16 sq.mm aluminium armoured cables.
1
-
13384.07
Supply,transportation and fixing of 150W LED HIgh Bay Luminaire with high power COB LED made of pressure diecast alluminium housing with powder coated,Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's having efficacy 100 lumines/watt, System efficacy 95lm/W and junction temprature 70°C, with Ingrees protection IP66, IK05, Driver surge protection 4KV, In house additional Surg wide/ Narrow beam optics, THD10% at 110 Volts AC, driver efficiency 90%, , CCT: 3000K - 5700K, minimum CRI70, etc., complete.Make:a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj /Greenlites / Havells/Capart(Premium) /Halonix/Polycab/Keselec/ HPL/ Jaquar/Eveready / Surya (ORION-II)/ FortuneArrt (UFO-S) /Rhino(GPHB02 Series)
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG
30
-
12518.62
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required in line with IS 3043
5
-
7288.92
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm)
75
-
153.12
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
40
-
74.43
Supply, installation and testing of 5 star rating 1.5 Ton Split Air Conditioner.
6
-
46080
Supply & Fixing of DOL starter 415 V, 3 phase, 50 Hz enclosed with no volt coil and overload protection with necessary matrials, etc. complete suitable for 10 HP Motor.
2
-
2998.38
LAN Works (Active Components/Material)_Enterprise Grade Manageable L2 switch,24 port 10/100/1000 Base T POE, 4 port 10Gb SFP/1Gb SFP uplink modules, SFP+10Gb-LR - 4nos Make: preferably Juniper/CISCO
1
-
147500
Online UPS, 2KVA with Battery, Back up time of 60 min
1
-
52000
Passive Components /Material (1) UTP cable CAT 6A, 305 meter box
1
-
12271.06
24 port patch panel CAT6A
1
-
8251.74
Wire manager /patch chord minder panel CAT 6A
1
-
121.42
Information Outlet CAT 6A - Single (1 port)
12
-
610.83
Patch cord UTP CAT6A- 1 meter
12
-
376.66
Patch cord UTP CAT6A- 2 meter
12
-
412.59
19"Rack, wall mount ,22U height ,front glass door(lockable ,toughned 4mm), with all accessories.
1
-
16500
Fiber optic outdoor armoured cable,loose tube single mode (SM)10G in meter (6 core)
250
-
41.3
Optical Fiber pigtails MM/SM-LC type, 1 meter for all types( SM-LC type)
12
-
346.21
Optical fiber patch cord, SM, LC-LC, length 3 m
4
-
1557.95
LIU,1u/2u drawer style 19"Rack mount enclosure-LIU for 6 core OFC(SM)
2
-
5874.4
Supply of PVC conduit of OD size (per meter )25 mm along with bends - ISI Marked
60
-
36.05
Supply of PVC conduit of OD size (per meter)32 mm along with bends- ISI Marked
120
-
52.88
Supply of GI pipe under ground and on surface 1.5 inch diameter
20
-
295
Supply of 2 inch diameter HDPE PVC jacket (1.5 Heavy guage) under ground or on surface (per meter)
300
-
96.76
SERVICES_Laying of UTP CAT 6A cable/STP per meter
300
-
19.82
Laying of OFC Cable
50
-
19.82
Installation & Termination of information outlets(including termination of CAT 6A
12
-
18.59
Installation & termination of UTP cables on Patch card CAT 6A with wire manager
1
-
74.34
Installation of PVC conduit of OD size (per meter) 25 mm
60
-
30.98
Installation of PVC conduit of OD size (per meter) 32 mm
120
-
30.98
Soft soil/ hard soil underground digging depth of 3 feet min. including clearing the site by removing debris, laying of separate HDPE conduits an laying of OFC &Telephone cables and covering with sand and bricks making the site to original position, fixing of cable root indicators in every 20 meters including all incidental expenses etc.,
300
-
413
Installation of GI pipe (1.5 inch)under ground and on surface
20
-
37.17
Fusion splicing of SC/LC type pigtails
12
-
295
Power infrastructure & UPS along with batteries installation
1
-
5310
Installation of wall mount rack (22 U) with all accessories
1
-
4336.5
CC TV WORKS (a) Active components_(5MP Resolution IP Bullet Camera with 2.7-13.5 mm Motorized varifocal Lens, PoE, WDR, inbuilt 256 GB SD Card and 60m IR Support including accessories like FM45 CAT6 connectors, pole mount camera brackets etc..) or better
1
-
26867.42
Outdoor PTZ Cameras (IP, True Day/Night, Outdoor, 2 MP PTZ Camera, POE Enabled, ONVIF S, G, T compliant)
2
-
45150.34
(8-port POE+ Gigabit, 2-port SFP industrial Grade network switch along with fully loaded 1000BASE-LX SFP, SMF 10km, LC connector from same OEM, Industrial Temp- Operating Temperature -40Deg C - +75 Deg C ) or better
1
-
103592.2
(b). Passive components_Poles: 4 inch dia, 4 mtr height Galvanized Iron pole with all accessories to install outdoor IP bullet cameras
1
-
21240
Pole for PTZ Cameras (10 mtr. Length)
2
-
76700
Weather proof outdoor IP65 pole mount Rack with complete accessories
2
-
25104.5
LC 06 Port Duplex DIN Rail Fibre Optic Terminal Box (LIUs)
2
-
7749.06
LIU ,1u/2u drawer style 19"Rack mount enclosure-LIU for 12 core OFC(SM)
1
-
7749.06
LC-LC Duplex LSZH OS2 OFC patch cords
4
-
895.62
6 core Single mode Central Loose Tube Armoured External OFC Cable
250
-
41.3
Category 6U/UTP 4 Pair External Cable PE
305
-
41.3
3 core 2.5 sqmm Copper power cable armoured
120
-
159.3
HDPE 2 inch conduits for Armoured OFCs
225
-
96.76
HDPE 2 inch conduits for armoured power cables
120
-
96.76
Services part_Installation, Testing, Commissioning, networking, configuration & Documentation of CCTV surveillance system
1
-
59000
Soft soil/ hard soil underground digging depth of 3 feet min. including clearing the site by removing debris, laying of separate HDPE conduits and pulling of OFC & power cables and covering with sand and bricks making the site to original position, fixing of cable root indicators in every 10 meters including all incidental expenses etc.,
225
-
413
Horizontal boring / Horizontal directional drilling of Bituminous road (BT) / Cement concrete Road and laying of separate HDPE conduits for OFC & power including all incidental expenses etc.,
25
-
2950
Underground pulling & laying of 6 core single mode armoured OFC through concealed HDPE duct Pipe underground
250
-
47.2
Single mode OFC splicing
30
-
295
LIU fixing
3
-
4130
Pole foundation, RCC man hole construction, pole laying & fixing and weather proof junction boxes installation in the pole
3
-
37760
TELEPHONE (A) Material_20 pair telephone MDF Mild steel (MS) DP Frame module set with Krone modules
1
-
978.25
20 pair Un-armoured jelly filled telephone cable (Dia. 0.5mm each conductor )
250
-
148.9
2 pair telephone cable PVC insulated (Dia. 0.5mm each conductor)
300
-
9
Telephone RJ11 I/O with face plate size 4/4 with metal box & with RJ-11 type female connector for the termination of telephone line cord
12
-
250
MATRIX SPARSH VP510E VoIP Phones
3
-
8940.86
Analog Telephone Push Button instrument with speaker phone and CLI facility (with line cord & RJ-11 rosette box)
9
-
950
Supply of 1/2” PVC conduit pipe for 2 pair telephone cable inside of rooms
300
-
15
(B) SERVICES_Fixing and termination of 20 pair Krone Telephone MDF Box
2
-
652.81
Fixing and termination of RJ 11 telephone I/O with face plate with 4/4 metal box in concealed for installation of telephone instrument
12
-
50
Horizontal boring / Horizontal directional drilling of Bituminous road (BT) / Cement concrete Road and laying of separate HDPE conduits for 20 pair telephone cable including all incidental expenses etc.,
40
-
2499.24
Laying of 2 pair PVC cable through insulated cable through concealed 1/2” PVC conduit pipe
300
-
22
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements