Municipality Tender

Cost and supply of Red Earth from Agiripalli quarry including cost and conveyance of all materials and filling all labour charges etc complete

Cost and supply of lawn including cost and conveyance of all materials and filling all labour charges etc complete

Painting to new iron work with synthetic enamel paint two coats over pirmary coat with red oxide paint including cost and conveyance of all materials and labour charges etc., complete

Sand Filling of foundation trenches as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Supply of precast concrete blocks for paving of M-35 grade and thickness not less than 60mm for light traffic areas confirming to IS 15658:2006 in all shapes and designs as per the manufacture's specification MAT-00841, BMT-D.13, Pg no.22 SSR 24-25

Labour charges for laying & fixing of precast concrete blocks for paving of all grades, any thickness, all sizes & shapes including all labour charges for loading & unloading , laying to desired lines and levels complete excluding cost of cement , sand, water, electricity etc., LAB-01180, BMT-D.17, pg no.22 SSR 24-25

Supply and fixing of Rope lighting including cost and conveyance of all charges etc., complete

Play Equipment Specifications 1. Metal:- The pipes should be of ‘C’ class of Jindal/TATA make of Galvanized with minimum of 800 microns ionized coated and zinc dipped joint with robotic welded. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process should dressed of removing all sharp edges and burrs. All pipes and metal parts should be applied Itch Primer then apply powder coated using standard powder of imported paints with international standards to the total thickness should not be less than 80 microns of. All metal parts should be tested accordance to ISO 7227. 2. Plastic:- All plastic parts should solid polyethylene and UV- stabilized (LLDP) should be used. 3. Rubber:- High quality grip rubber should be used for the handle. 4. Bearings:- All bearings should be reputed make and press fitted for smooth rotation, and does not require relubrication i.e., maintenance - free ball bearing. 5. Nylon Alloys:- Should be used. 6. Safety &maintenance:- All products of equipment should be tested as per EN 16630 safety norms and certificates should be issued by the reputed notified national/international certified agency i.e., IPEMA, TUV, CPSC, SGS, Euro Tech, Universal Registrars and clearly display the GS test mark on the product as per EN 16630 safety certificates. Maintenance should be followed as per EN 16630 guidelines. The equipment should be with stand for the weight of user more than 100.00 Kg. Note:- 1. Size of the equipment mentioned and reach must be maintained about plus or minus 15% variation will be considered provided they shall be confirmed to standards of ISI or international equivalent standard certifications as per document listed S.No.7(e) of data sheet. 2. Specifications mentioned for above items is minimum. Higher specifications can be considered. SEE SAW Four Seater See Saw: 4 No’s Seats made with FRP Fibre Seats and fitted both ends of 50mm dia pipe length 8ft with bolts and nuts and both fitted on Horizontal pipe 3 length and 60mm dia U shape (rivers) with clamps with fibre seats L x W x H: 8ft x 3ft x 3ft.1) Centre Main Frame Structure: 80NB hot dip galvanized pipes conforming to IS 1239 2) See Saw: 2 no’s of see saws made up of 80NB GI pipe conforming to IS 1239 with proper holding. 3) FRP Seats: 4nos of FRP seats 4) FRP (Fibre reinforced plastic): All the fibre reinforced plastic materials are processed by the hand laid process which is considered to be the best of its type. International quality of Gel coats which is duly mixed with UV stabilizes pigment to give the required colour to the product. Thickness of the FRP material varies from 3mm to 5mm as per the product. The FRP material should be tested for abrasion resistance & UTS (Ultimate tensile test). 5) Pipes: All metal pipes should be used heavy duty (C class) of Tata/Jindal make only with hot dipped galvanized pipes conforming to IS 1239 (Part 1) with GI thickness not less than 60 micron. 6) Powder Coating: It will be done with pure polyester raw material. Dry film thickness maintained within the range of 50-70microns. It is tested for adhesion test (According to ASTM D 3359) with the help of cross hatch cutter instruments. 7) Nut and Bolts: Galvanized/ s.s./ Allen bolt/button head Allen bolt and nuts/nylon lock nuts are used with PVS bolt caps. 8) Bearing: Bearings is self-lubricated made of SKF/NTN/ Nachi make shall be provided for smooth and trouble free movement. 9) All open ends of pipe been closed by GI caps for user safety against entrapment. 10) Colour: Multicolour for optional or customized and as per RAL shade. 11) Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. 12) Fixing work: Civil works for fixing equipment with required number of pits with M20 Concrete as directed by site in-charge, including cost of conveyance of all material like cement, sand, metal,iron Reinforcement, water etc., including all labour charges for completion of finished item of work. 13) Certificate: ISO 9001:2015

CIRCULAR SWING 1) Swing leg pipes: SSWINGS wing leg support pipe made by 40NB hot dipped galvanized pipe of Height 1524mm conforming to IS 1239 with GI thickness up to 60micron. The circular swing frame made from 32NB, 25NB, 20NB, 15NB, GI pipe 2) Top Pipe: Circular swing top pipe top & horizontal pipe fixed to 50Nb galvanizes pipe having C class material of length 1524mm at the centre and two junction box frame at the ends to attach leg pipes. 3) Seat frames: Sitting platform and back supporting plate is made up Of FRP material. 4) Bearing: Bearings is self-lubricated made of SKF/NTN/ Nachi make shall be provided for smooth and trouble free movement. 5) Pipes: All metal pipes should be used heavy duty (C class ) of Tata/Jindal make only with hot dipped galvanized pipes conforming to IS 1239 (Part 1) with GI thickness not less than 60 micron. 6) Powder Coating: It will be done with pure polyester raw material. Dry film thickness maintained within the range of 50-70microns. 7) ) Nut and Bolts: Galvanized/ s.s./ Allen bolt/button head Allen bolt and nuts/nylon lock nuts are used with PVS bolt caps. 8) Colour: Multicolour for optional or customized and as per RAL shade. 9) ) FRP (Fibre reinforced plastic): All the fibre reinforced plastic materials are processed by the hand laid process which is considered to be the best of its type. International quality of Gel coats which is duly mixed with UV stabilizes pigment to give the required colour to the product. Thickness of the FRP material varies from 3mm to 5mm as per the product. The FRP material should be tested for abrasion resistance & UTS (Ultimate tensile test). 10) Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. 11) All open ends of pipe been closed by GI caps for user safety against entrapment. 12) Certificate: ISO 9001:2015 13) L x W x H: 5ft x 5ft x 8ft. Note: Seats FRP along with Pigment Paints. 14) Fixing work: Civil works for fixing equipment with required number of pits with M20 Concrete as directed by site in-charge, including cost of conveyance of all material like cement, sand, metal, iron Reinforcement, water etc., including all labour

MGR 4 SEAT Main pipe made from 90 NB Mild Iron with heavy quality of pipes, round pipe and seat pipes are made from 32 NB Mild Iron with heavy quality of pipes. Seats are made from heavy FRP of 6mm thickness.

DOUBLE WAVE SLIDE 1) Pipes: Material Specification: The Spiral Slide is made up of Fiber Reinforced Plastic (FRP) in 3 parts with holding having shell thickness of 3 to 4mm. The slide is supported on a center support of 80 NB pipes. The landings supports of the slide are supported by 20 NB pipes. The Slide ladder is made up of 40 NB G.I. Pipe & ladder hand –railing is made up of 25 NB G.I. Pipe. The triangular steps of the ladder are made up of 16 SWG G. I. Sheets. The safety railing of the slide is made up of 15 NB & 20 NB G. I. Pipe. The trader sand risers of the ladder are designed in such a way it won’t entrap child’s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. 2) ) Nut and Bolts: Galvanized/ s.s./ Allen bolt/button head Allen bolt and nuts/nylon lock nuts are used with PVS bolt caps. 3) ) Material: Fibre Reinforced Plastic) with anti-skid surface on top 4) FRP (Fibre reinforced plastic): All the fibre reinforced plastic materials are processed by the hand laid process which is considered to be the best of its type. International quality of Gel coats which is duly mixed with UV stabilizes pigment to give the required colour to the product. Thickness of the FRP material varies from 3mm to 5mm as per the product. The FRP

DOUBLE JHULA Supply, Delivery Installation and Commissioning of 6.5m x 1.5m size if Fiyr Seater Arc Swung of Arihant / Equivalents make including transportation, installation, commission, Loading and Unloading etc., for complete finished item of the work. 1)Arc swing frame: 6700 mm long 80NB pipe bend in single piece & welded together with a flange 5mm thick & ISA of 40 x 40 x 5mm to form a strong frame at bottom and middle. The 80NB pipe is hot dip galvanized pipe conforming to IS 1239 with GI thickness of 60mm dia. Height of the frame is 2700mm. 2) Top Pipe: 50NB Top pip with two arc swing glances welded at both its ends. Pipe can with standing torsional tress created due to swinging motion the 50NB top pipe is hot dip galvanized pipe of length 2950mm conforming to IS 1239 with GI thickness of 60. 3) Sweat Assembly: a) Swing clamp assembly: Swing clamps made up of two parts are joining together with M6 Allen Bolts along with S hook is specially designed swing pin. b) Hook: S-Hook of Dia 8mm & 145 x 130 triangular hook of grade SS 304 c) Chain: Rubber dip moulded swing chain of dia. 6mm & 1450mm long. d) Seat: Rubber seat made by natural rubber with sufficient reinforcement. 4) Bearing: Bearings is self-lubricated made of SKF/NTN/ Nachi make shall be provided for smooth and trouble free movement. 5) Pins & Circlips: 12mm diameter pins shall be made from EN8 material & circlips A10 6) Pipes: All metal pipes should be used heavy duty (C class ) of Tata/Jindal make only with hot dipped galvanized pipes conforming to IS 1239 (Part 1) with GI thickness not less than 60 micron. 7) Powder Coating: It will be done with pure polyester raw material. Dry film thickness maintained within the range of 50-70microns. 8) Nut and Bolts: Galvanized/ s.s./ Allen bolt/button head Allen bolt and nuts/nylon lock nuts are used with PVS bolt caps. 9) 19) Fixing work: Civil works for fixing equipment with required number of pits with M20 Concrete as directed by site in-charge, including cost of conveyance of all material like cement, sand, metal, iron Reinforcement, water etc., including all labour charges for completion of finished item of work. 10) Certificate: ISO 9001:2015 11) Colour: Multicolour for optional or customized and as per RAL shade. 12) Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap.

NET ROCK CLIMBER 1) All material Springs and other chains are heavy material good quality 2) ) Nut and Bolts: Galvanized/ s.s./ Allen bolt/button head Allen bolt and nuts/nylon lock nuts are used with PVS bolt caps. 3) ) Material: Fibre Reinforced Plastic) with anti-skid surface on top 4) FRP (Fibre reinforced plastic): All the fibre reinforced plastic materials are processed by the hand laid process which is considered to be the best of its type. International quality of Gel coats which is duly mixed with UV stabilizes pigment to give the required colour to the product. Thickness of the FRP material varies from 3mm to 5mm as per the product. The FRP material should be tested for abrasion resistance &UTS (Ultimate tensile test). 5) All metal chains and springs are good quality 6) Colour: Multicolour for optional or customized and as per RAL shade. Supply, Delivery, Installation and Commissioning of 2.5m x 1.5m size of net rock climber of arihant/equivalent make including of transportation, installation, commissioning, loading and unloading in complete finished item of the work. 1) Pad: Rock climber 7ft. Pad made from fibre reinforced plastic (FRP) attached to the angular frame. The pad is provided with rock shaped part ergonomically spaced in zig zag manner for climbing act. The rocks are bolted on same platform, with a gradient of 65 degree from the round. 2) Support: Bend angular frame made from 40NB Galvanized pipe conforming ti IS 1239:1979 with base plates fixed on each end and grounded for strong foundation. It has 12 U – hook on one side for attaching rope. It has profile plate for top support and has plate 130 x 50 x 5 for on one side. 4) Rope: Rope size conforming to standards EN11761:1998 for minimum grip requirement. It is size of 18 of nylon. Mesh size conforming to standards EN1176-1:1998 & ASTM – F1487:07a for safety against entrapment of head and neck. 5) Clamp: It is made from nylon rope attached

ELEPHANT RIDER 1) All material Springs and other chains are heavy material good quality 2) ) Nut and Bolts: Galvanized/ s.s./ Allen bolt/button head Allen bolt and nuts/nylon lock nuts are used with PVS bolt caps. 3) ) Material: Fibre Reinforced Plastic) with anti-skid surface on top 4) FRP (Fibre reinforced plastic): All the fibre reinforced plastic materials are processed by the hand laid process which is considered to be the best of its type. International quality of Gel coats which is duly mixed with UV stabilizes pigment to give the required colour to the product. Thickness of the FRP material varies from 3mm to 5mm as per the product. The FRP material should be tested for abrasion resistance & UTS (Ultimate tensile test). 5) All metal chains and springs are good quality 6) Colour: Multicolour for optional or customized and as per RAL shade. 7) Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap.

BIKE RIDER 1) All material Springs and other chains are heavy material good quality 2) ) Nut and Bolts: Galvanized/ s.s./ Allen bolt/button head Allen bolt and nuts/nylon lock nuts are used with PVS bolt caps. 3) ) Material: Fibre Reinforced Plastic) with anti-skid surface on top. 4) FRP (Fibre reinforced plastic): All the fibre reinforced plastic materials are processed by the hand laid process which is considered to be the best of its type. International quality of Gel coats which is duly mmixed with UV stabilizes pigment to give the required colour to the product. Thickness of the FRP material varies from 3mm to 5mm as per the product. The FRP material should be tested for abrasion resistance & UTS (Ultimate tensile test). 5) All metal chains and springs are good quality 6) Colour: Multicolour for optional or customized and as per RAL shade. 7) Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap.