Municipality Tender

CC Culvert;Plain Cement concrete M20 using 20 mm Down graded metal including cost and conveyance of all materials and labour charges for centering, machine mixing, laying, vibrating and curing etc., including all other incidental charges of all T&P for finished item of ork as per Morth specification 1500,1700,200 and 2702 and as directed bythe departmental enineer in charge RBR- FNDNVl 13 etc., (RBR-FNDN-4-Vol 3 (1:2:4) Drain Quenet

CC Culvert;Drain Sidewalls

CC Culvert;RCC M-30 Design mix (Cement : Fine Aggregate : Coarse Aggregate ) corresponding to table 9 of IS 456 using 20mm size down graded machine crushed hard granite metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate , water etc., to site and including seigniorage charges, sales & others taxes on all materials including all operational , incidental and labour charges such as machine mixing., laying concrete, curing etc., completed. R.C.C. Cover Slabs

CC Culvert;Supplying,and delivery and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100, 1600 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not welded.

CC Culvert;Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing for 14- days, curing compound and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. RBR-CCPV-5 (Without 125mm Mircon Sheet)

CC Culvert;Supply and delivery of MS iron gate using MS square rods for center frame and MS Angulars for alround frame,locking arrangements and providing hinges including cost of material, fabrication charges fixing in position etc., complete as directed by the departmental officers