Municipality Tender

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Tech. specification No 503 MORTH

Before bm

Providing and laying of bituminous macadam with 40-60 TPH drum mix hot mix plant producing an average output of 37.5 tonnes per hour using hard blasted granite crushed aggregrates of Grading - 11 as per table 500-4 of MORT & H specification premoixed with bituminous binder of 80/100 grade @ 3.3% by weight of total mixture transported to site , laid over a perviously prepared surface with mechnical paver finisher to the required grade level and alignment and roller as per clauses 501.6 and 501.7 to acheive the desire compaction including hire and operational charges all T & P and all other contingent charges neceesary including cost of all materials , VAT , seigniorage charges etc., complete for finished item of work and as per MORTH spectification NO.504 (4th revision) and as directed by the dept officers

After bm

Providing and laying 25mm thick compacted semi dense bituminious concrete (SDBC) by 40-60 TPH drum mix hot mix plant producing an average of out put of 37.50 tonnes per hour using hard blasted granite aggregates of grading 2 as per table 500-15 of MORTH specification with bituminious bider 60/70 grade at 5% of quantity and filler including cost of all materials VAT,seinorises, transporting to hot mix to work site complete finished item of work as per MORTH and 4 specification 508 (4th revision) and as directed by the Department officers RBR - BASC - 8 Page 361..

Providing and laying pavement marking with hot applied thermoplastic paints (TYPE-2) conforming to ASTM D-36/BS 3262 (part-1) complete as per drawing and Technical Specification Clause 803. a) lane/centreline / edge marking transverse and any other markin

Providing and fixing Reflective pavement markers (Road Studs) made of plastic body moulded from HIPS (Hi-impact polystrene) or ABS or ASA (Acrylic Strene Acrylonitrite) and reflective panels shall consists of number of lenses containing single or dual prismatic cubes capable of providing total internal reflection of the light entering the lens face and conforming to ASTM, BS and complying to guidelines issued by MOST circular No RW/NH- 33023/10/97-DO III dt. 11.6.1997. The height, width shall not exceed 20mm, 130mm and the ama of each retro-reflective surface shall not be less than 13sqem and the slope of retro- reflective surface shall preferably be 35+/-5 degree to have Fixing will be without nails and the reflective marker shall be fixed to the road surface using the adhesives and the procedure recommended by the manufacturer and as per pars 6.2 of the MOST circular including cost of and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading. unloading charges, site clearance etc and complete necessary for successful completion of the work as directed by Engineer in Charge.

Clearing grass and removal of rubbish up to a distance of 30 m outside the periphery of the area as per Technical Specification Clause 201 MORD