Municipality Tender

PRIMARY HEALTH CLINIC;Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, pouring concrete by tremmy, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including tremmy pumping, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Column footing

PRIMARY HEALTH CLINIC;Plinth beams

PRIMARY HEALTH CLINIC;Columns

PRIMARY HEALTH CLINIC;Roof beams & portico beams

PRIMARY HEALTH CLINIC;Roof slab & portico

PRIMARY HEALTH CLINIC;Lintel beams

PRIMARY HEALTH CLINIC;Sunshades

PRIMARY HEALTH CLINIC;Brick Masony in C.M (1:6) Pro. using Second class bricks including cost and conveyance of all materials to site of work, seigneorage and labour charges for fixing Motor constructuing masonary, curing, etc., complete as per S.S.-1 Cum

PRIMARY HEALTH CLINIC;Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required Sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work

PRIMARY HEALTH CLINIC;Plastering with C.M (1:4) 12mm thick single coat including cost and conveyance of all materials to site of work, labour charges for curing, etc., complete as per S.S (For outside walls)

PRIMARY HEALTH CLINIC;Plastering with C.M (1:4) 20mm thick single coat including cost and conveyance of all materials to site of work, labour charges for curing, etc., complete as per S.S (For Inside walls)

PRIMARY HEALTH CLINIC;Plastering with C.M (1:3) 12mm thick single coat including cost and conveyance of all materials to site of work, labour charges for curing, etc., complete as per S.S (For outside walls)

PRIMARY HEALTH CLINIC;Providing impervious coat to exposed RCC roof slab surfaces with CM (1:3) prop.20mm thick mixed with 1Kg per one bag of cement, laid over roof slab when it is green,including cost of all materials and all operational,incidental and labour charges mixing for motar ` laying, rendering smooth and thread lining, curing including rounding off junctions of walls and slab for finished item of work etc., complete but excluding seignorage charges and as directed as per SS etc., complete by the departmental officer incharge of the work.

PRIMARY HEALTH CLINIC;Painting to the walls with 2 coats of Acrylicemulsion paint of exterior Grade having VOC (Volatile Organic Compound) antain less than 50 Grams per liter of approved brand and shads including one coat of cement primer after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and all operational incidental, labour charges etc., complete for finished item of work as per SS 911 for Internal Walls. Painting to the walls with 2 coats of Acrylicemulsion paint of exterior Grade having VOC (Volatile Organic Compound) antain less than 50 Grams per liter of approved brand and shads including one coat of cement primer after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyaance of all materials to work site and all operational incidental, labour charges etc., complete for finished item of work as per SS 911 for Internal Walls.

PRIMARY HEALTH CLINIC;Painting to the walls with 2 coats of Acrylicemulsion paint of exterior Grade having VOC (Volatile Organic Compound) antain less than 50 Grams per liter of approved brand and shads including one coat of cement primer after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and all operational incidental, labour charges etc., complete for finished item of work as per SS 911 for Internal Walls. Painting to the walls with 2 coats of Acrylicemulsion paint of exterior Grade having VOC (Volatile Organic Compound) antain less than 50 Grams per liter of approved brand and shads including one coat of cement primer after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyaance of all materials to work site and all operational incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls

PRIMARY HEALTH CLINIC;Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 10 mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work.

PRIMARY HEALTH CLINIC;Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ?C? channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail &bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ?C? Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer?s specification & drawing for finished item of work .

PRIMARY HEALTH CLINIC;Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM). coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6? Tower bolt ? 2 Nos., 6? D handles ? 2 Nos., 10? Aldrop ? 1 No., Butt Hinges ? 6 Nos, Mortise Lock of approved quality ? 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Double leaf Door

PRIMARY HEALTH CLINIC;Providing and fixing factory made uPVC white colour casement/Casementcum fixed glazed door comprising of uPVC multi-chambered frame, sashand mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll formingprocess of required length (shape & size according to Upvc profile),uPVC extruded glazing beads of appropriate dimension,EPDMgasket,zinc alloy (white powder coated) 3D hinges and one handle oneach side of panels along with zinc plated mild steel multi point lockinghavingtransmission gear, cylinder with keeps and one side key, G.Ifasteners100 x 8 mm size for fixing frame to finished wall and necessarystainlesssteel screws, etc. Profile of frame & sash shall be mitred cut andfusion welded at all corners, mullion (if required) shall be also fusionweldedincluding drilling of holes for fixing hardware's and drainage ofwater etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required sizeand of approved quality, all complete as per approved drawing & directionof Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealent . Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made Casement door with top hung ventilator with 3D and S.S. frictionhinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm)

PRIMARY HEALTH CLINIC;Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm).

PRIMARY HEALTH CLINIC;Providing and fixing of top hung Ventilators made of pre-painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns thick and section for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to have rebate for glazed shutter with a provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6? (152.4mm) pitch etc., complete for finished item of work. Single openable ventilator shutter size of 2? 0? x 2? 0? (609.6 x 609.6mm) outer frame section size of 80 x 45mm, shutter frame section size of 52 x 25mm thick

PRIMARY HEALTH CLINIC;Flooring with Non - skid red or white full body vitrified tiles of size 600 x 600 mm and thickness between 8 - 10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete.

PRIMARY HEALTH CLINIC;Flooring with Non - skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 8 - 10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete.

PRIMARY HEALTH CLINIC;Providing skirting to internal walls to 15cm height/risers of steps with Soluble salt Porcelain Vitrified Tiles Screen printed and polished of size 600 x600mm and thickness between 8-9mm 1st quality set over base coat of CM (1:5) 12mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work,

PRIMARY HEALTH CLINIC;Dadooing to walls with Glazed red or white full body ceramic wall tiles of size 200 x 300mm and thickness 6mm 1st quality set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete.

PRIMARY HEALTH CLINIC;Supply and Fixing of 25mm dia 1.80mm thick PVC pipe (ISI MARK) concealed in Slab with all required accessories including masonary work and labour charges etc., completeSupply and Fixing of 25mm dia 1.80mm thick PVC pipe (ISI MARK) concealed in Slab with all required accessories including masonary work and labour charges etc., complete

PRIMARY HEALTH CLINIC;110 mm dia Single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar or any ISI Brand