Municipality Tender

above 90 up to 150 mtrs

Providing High Yield Strength Deformed (HYSD)/ Thermo Supply, delivery, and insertion of 180mm dia OD PVC 10 Kg/cm2 casing pipe including cost and conveyance of all materials and labour charges etc., complete and as directed by the Engineer- in -Charge of the work including all taxes but excluding GST

Supply of 6 Sqmm WPSC (Weather Proof Single Core) ISI Alluminium Wire. Makes : As per list of recommended brands. (ELEC 1.6.1)

S&F 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete.

S&F 50 mm Nominal Bore Long Couplings Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete.

Supply and Transportation of 12.5 H.P 10Stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of recommended brands as category I.

Fabrication ,transportationand and supply of wall mounted Control Panel Board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Voltmeter ; 0-500 V 96x96mm size. Including Voltmeter ; 0-500 V 96x96mm size, 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1se Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab - 1No. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size). Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab-1No. Single phase preventor of suitable range Makes: L&T / Minilec / Powertec. - 1No. 32 A TP, 10KA MCB. Makes: Legrand / Schneider / - 1No. Indication lamps (R-Y-B) with switch control - 1set. Voltmeter & Ammeter selector switch - 2 Nos. Supply and fixing of ISI Mark suitable capacitor Makes: L&T / Siemens / Schneider / Epcos/Havells.

Supply of 3 Core 4.00Sqmm ISI marked Flat Copper cable of ISI for Submersible Motors confirming to IS: 694:1990.Makes: As per list of recommended brands as category I

Supply & Delivery of bore well material including cost and conveyance of all material, labour charges etc., complete.

50mm X 12" Nipple

2 X 2 1/2 Non Return Value

50X75 mm flage

50mm GI Bend

50X90 mm flage

2 X 2 1/2 Plange

50mm X 5 Feet Nippal

50mm Clamp Set

2 X 4 PVC RFTA

110mm PVC Bend

110mm PVC TEE

110mm PVC Coupling

110mm DI Valve

1/2 X 2" Nut & Bolts

5/8 X 3" Nut & Bolts

Plangr Watchers

G.I Wire

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Ordinary soil Manual Means Upto 3 m depth.

Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).

Laying Cement concrete (1:4:8) using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete. As per APSS 402 (BLD-CSTN-2-5).

Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard other than granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site, sales & other taxes on all materials including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and overheads & contractors profit complete for finished item of work in foundation and basement. (APSS No. 601 & 615)

Plain Cement Concrete (1:2:4) prop. Using 20mm nominal size machine crushed hand broken granite metal as per S.S 108 machine mixing , laid in position in layers not exceeding 15 cm thick including cost and conveyance of all meterials, seignorage, sales tax, royalties, and labour charges such as mixing concrete, laying tamping, curing all operational, incidental charges eetc., complete as per S.S 402 for finished items of work.

Brick Mansonry in CM (1:6) with 2nd class Bricks traditional size 23x11x7 cms (BLD-CSTN-3-1) including cost and conveyance of all materials from approved quarry, curing and labour charges etc., complete.

Manufacture, Supply and Delivery of R.C.C. Plain ended pipes conforming to B.I.S 458/2003, Ex-factory, excluding transportation and all taxes. For 1200mm Dia

Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc., complete for finished item of work.

White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials