Municipality Tender

Laying and Jointing of 110mm OD HDPE pipes by butt fusion welding as per IS:7634-part -II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure for 28 days as per IS Code as directed by the Engineer-in-Charge of the work

Supply and delivery of "Resilient Seated Soft Sealing"Gate Valves (Sluice Valves) with Boby and Bonnet of Suctile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent ad per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with Food Grade quality grade W270 grade EPDM, Replaceable Spindle Nur without gland packing with 3-0 ring protection system on the shaft and seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS14846. All the valves should be with fusin bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS-1538 Including all taxes, duties and transportation. P.N.1.0 (MPa) as directed by the Engineer-in-Charge of the work for 100mm dia

Supply and delivery of "Resilient Seated Soft Sealing"Gate Valves (Sluice Valves) with Boby and Bonnet of Suctile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent ad per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with Food Grade quality grade W270 grade EPDM, Replaceable Spindle Nur without gland packing with 3-0 ring protection system on the shaft and seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS14846. All the valves should be with fusin bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS-1538 Including all taxes, duties and transportation. P.N.1.0 (MPa) as directed by the Engineer-in-Charge of the work for 80mm dia

Labour charges for Lowering laying and Jointing and keeping in position of C.I. sluice valves, Reflex valves and scour valves etc., complete

Manufacture, Supply and Delivery of Cast Iron Pipes and Fittings (spls.) Conforming to IS. No.7181/1986, 5531/1988, 3950/1979 and C.I.D Joints confirming to is No.8794/1988 at site of work anywhere in A.P. Including, loading, unloading, transportation to site of work stacking at site transit risk and package, excluding taxes and duties.

100X100X100mm Plain TEE

100mm tail Piece

80mm tail Piece

Manufacture, supply and delivery of CID joints with Drill/core hole and including cost of ISI marked rubber rings of IS 10292-1988, bolts and nuts confirming to IS 1363- part - I & Part - III/1984 etc., suitable for AC pressure pipes of class - 15 including transportation.

for 100mm CID Joint

for 150mm CID Joint

for 200mm CID Joint

Collection, supply, and filling of Sand from approved quary to work site and stacking at work site to Dept. gauge for premeasurements including cost and conveyance of all materials, labour charges etc., complete as per standard specifications. Clause 305.39 MORD & 304 MORTH etc., complete and as directed by Engineer in Charge of work

Providing concrete for plain/reinforced concrete (1:2:4) Nominal mix in open foundations using 20 mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. as directed by Engineer in Charge of work

Manufacture, supply, & Delivery of HDPE fittings confirming to IS 4984-1995 including transportation to anywhere in A.P. excluding all taxes as directed by the Engineer-in-Charge of the work

HDPE-Bend-110mm dia

HDPE end Cap Bend-110mm dia

HDPE Long ends long neck -110mm dia

Supply and delivery of Bolts and Nuts with double washers excluding taxes and conveyance etc., complete (1/2" to 1") as directed by the Engineer-in-Charge of the work

Supply and delivery of Rubber packing excluding taxes and conveyance etc., complete as directed by the Engineer-in-Charge of the work