Municipality Tender

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Supply and placing of the M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, pouring concrete by tremmy, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including tremmy pumping, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Plinth Bean

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Columns

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive streangth not lessthan 50 kg/sqm for walls for Superstructure Walls.

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Providing Plasteing with CM (1:4), 12 mm thick including Cost & Conveyance of all materials and labour charges for mixing and curing etc., Complete as per S.S.

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Manufacture, supply, delivery and fixing of Window grills, Compound wall grills, Iron Doors, Windows made with MS flats etc including welding, finishing, applying red oxide paint as primary coat etc complete unit 1.00 kgs

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Painting to new iron work with synthetic enamel paint two coats over pirmary coat with red oxide paint including cost and conveyance of all materials and labour charges etc., complete

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, inlcuding cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Painting to the walls with 2 coats of Acrylicemulsion paint of exterior Grade having VOC (Volatile Organic Compound) antain less than 50 Grams per liter of approved brand and shads including one coat of cement primer after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyaance of all materials to work site and all operational incidental, labour charges etc., complete for finished item of work as per SS 911 for Internal walls.

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Painting to the External walls with 2 coats of Acrylicemulsion paint of Weather Proof Water based exterior Grade having VOC (Volatile Organic Compound) antain less than 50 Grams per liter of approved brand and shads including one coat of cement primer after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyaance of all materials to work site and all operational incidental, labour charges etc., complete for finished item of work as per SS 911 for Externals Walls.

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Providing and fixing factory made UPVC white colour sliding glazed window comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension Windows

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Providing and fixing factory made UPVC white colour fixed glazed windows / Ventilators comprising of uPVC multi chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket,G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profileof frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant. Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But, no extra payment on this account shall be made. Fixed windows / Ventilators made of (small series) frame 47 x 50mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension. Ventilators

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Supplying and fixing of MS Grill to windows / in open court yards using 25mm x 6mm MS flat alround and 10mm MS square bars horizontally at 125mm centre to centre and vertically at 300mm centre to centre including fixing with 4 Nos of MS Z holdfasts (2 on each side) duly making cutting brick masonry, fixing and making to original surface neatly including cost and conveyance of all materials, cutting, bending, welding, operational charges, labour charges, overheads and contractor profit etc., complete for finished item of work.

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Supply of FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable. Makes: Finolex / RR kabel / Havells /KEI/Polycab/Gloster/Goldmedal/GM as per SOR 2021-22, ELEC-1.5.1, Pg.No.13 a) 14/0.3mm (1.0 Sqmm)

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;b) 22/0.3mm (1.5 Sqmm)

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;c) 36/0.3mm (2.5 Sqmm)

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;d) 56/0.3mm (4.0 Sqmm)

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;e) 84/0.3mm (6.0 Sqmm)

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Supply of Modular Cover Frame. Makes:Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Ducor /L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA) as per SOR 2021-22 ELEC-1.8.3 a) 1 or 2 Modular Cover Frame

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;b) 3 Modular Cover Frame

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;c) 8 Modular Cover Frame

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;d) 12 Modular Cover Frame

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Supply of Switchs Socket with shutter & Fan Regulator. Makes: Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Ducor /L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA) as per SOR 2021-22, ELEC-1.8.1 Pg.No.19 a) 6A / 10A 1 Way 1 Module ModularSwitch

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;b) 16A / 20A 1 Way 1 Module ModularSwitch

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;c) 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter.

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;d) 20A Modular Socket with shutter

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;e) 2 Module Modular type Electronic step type Fan Regulator

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;f) One Module PVC Blanking plate

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Supply & fixing of 56" (1400mm) Sweep 5 star rated BLDC (Brush less Direct current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 32W , air delivery not less than 240 cubic meter/min with remote and without Regulator. Makes : As per list of recommended brands.ELEC-5.1.2

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Supply & fixing of 63A FP Isolator.Makes : As per list of recommended brands as category I.ELEC-2.11.1(G)

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Supply & fixing of 6-32A SP MCB 10KA C/D Curve ISI Mark. Makes : As per list of recommended brands as category I ELEC-2.10.1(A)

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Supply & fixing of Dummy Cover for PVC junction boxes ELEC-1.2.9

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Supply & fixing of 3 Plate Jumbo Ceiling Rose & BH / SBH. Makes : As per list of recommended brands.ELEC-1.7.1 a)3 Plate Jumbo Ceiling Rose ELEC-1.7.1(M)

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;b)BH / SBH. ELEC-1.7.1(N)

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. Makes : As per list of recommended brands as category I.ELEC-3.8.13

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Supply & fixing of 7.0W LED Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base, .Makes : As per list of recommended brands. ELEC-3.7.5(D)

Construction of Compound Wall And Providing Components like Water supply Arrengments and Approach;Supply, transportation & fixing of 90W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >110 lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driverefficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete . Makes : As per list of recommended brands as category I. ELEC-3.8.24(A)