Municipality Tender

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with on prepared surface, mixing by mix in place method at once and compacting with Hand roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD with gravel as per SS and as directed by the departmental officer in charge of the work, but excluding seigniroage charges.

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers on prepared surface, mixing by mix in place method at once and compacting with Hand roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD. with STONE DUST etc., complete as per SS and as directed by the departmental officer in charge of the work, but excluding siegniorage charges.

Dismantling of existing structures comprising of Reinforced Cement Concrete including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceble material and stacking the serviceble material with all lifts and lead of 1000m as per technical specification as per SS and as directed by the departmental officer in charge of the work

Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms including cost and conveyance of all materials and labour charges etc., BLD-CSTN-3-1

Auguring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles as per SS and as directed by the departmental officer in charge of the work.

RCC M- 20 Design mix (Cement 350 kgs fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering. as per SS and as directed by the Departmental officer in charge of the work but excluding seigniorage charges.

Supply and placing of the M 20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, centering, shuttering for finished item of work as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded (BLD-CSTN-2-18)

Plastering with CM (1:4) 20mm thick. The rate including cost and conveyance of all materials and labour charges etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Manufacturing supply and fixing of M.S.Grill Gate with M.S.Angulars, M.S.Flats. The rate including cost and conveyance of all material and labour charges for fabrication of steel work including cost of welding rods , power charges and fixing the grills in position etc., complete as directed by the departmental officer in charge of the work.

Repairs to the existing damaged Open Gym equipment

At muchimilli Gym equipment

Repairs to the existing damaged MS Iron Gate of Size(3.85*(1.5+2+1/5)/3) , Provaiding new MS angulars by replacing old damaged Ms angulars ,Ms square solid pipe ,including provaiding Blue cribbling sheet (0.90m height to a total length of 3.85m gate) bottom side ,including welding turning , labour charges for all operations and painting synthatic enamail paint over a primary coat of Redoxide etc , complete as directed by the departmental officer in charge of the work.

Repairs to the existing damaged Benches including welding and Painting in the Brodipeta Park

Bench repairng

for electrical poles

For plumbing work at brodipeta park

Filling Sand in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH . The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniroage charges.

Manufacturing and Supplying wave slide equipment to the site including cost and conveyance charges etc

Labour charges for the fixing of the delivered wave slide equipment , complete as directed by the departmental officer in charge of the work

Manufacturing and Supplying Merry Go Round palying equipment to the site including cost and conveyance charges etc

Labour charges for the fixing of the delivered Merry Go Round equipment , complete as directed by the departmental officer in charge of the work

Manufacturing and Supplying sea saw palying equipment to the site including cost and conveyance charges etc

Labour charges for the fixing of the delivered sea saw equipment , complete as directed by the departmental officer in charge of the work

Manufacturing and Supplying Spring Duck palying equipment to the site including cost and conveyance charges etc

Labour charges for the fixing of the delivered Spring Duck equipment , complete as directed by the departmental officer in charge of the work

Supply of 6.0 Sqmm ISI marked WPTC (Weatherproof Twin Core) ISI Aluminum Wire. Makes: As per list of recommended brands. Makes: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno) Rates as per 2023-24 SSR ELEC 1.6.2 (a)

Supply of 1.5 Sqmm FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable. Makes : As per list of recommended brands as category I Makes: Finolex / RR kabel / Havells KEI/Polycab/Gloster/Goldmedal/GM/ Finecab/ Fortune Arrt/Anchor/Million Rates as per 2022-23 SSR ELEC 1.5.1 (b)

Supply of 20A SP MCB 10KA C/D Curve ISI Mark. Makes : As per list of recommended brands as category I Makes: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx /L&T-AU/Indo Asian-Opti pro/ HPL (Techno) Rates as per 2022-23 SSR ELEC 2.10.1 (a)

Supply of PVC /cotton tape Role (8 Mtrs Rates as per SSR 2023-24 ELEC- 8.1.15

Repairs and Maintanance of equipment to open zym's at Muchimilli and jr college Ground and Repairs and errection of Children Play Equipment to Rajababu nagar and Brodipeta parks, Ramachandrapuram Municipality.