Municipality Tender

Construction of Urban Primary Health Centre;RCC M 25 Design mix coresponding to table 9 of IS 456 using 20 mm graded machine hard granite metal from approved quarry including cost and conveyance of all materials like cement fine aggregate (sand); coarse aggregate,water etc to site and including hire charges and labour charges for centering, shuttering, machine mixing, laying concrete,curing etc complete but excluding cost of steel and its fabricaion charges for finished item of work complete as per SS and as directed by the departmental officer in charge of the work. But excluding seignorage charges. Footings

Construction of Urban Primary Health Centre;COLUMNS - GROUND FLOOR Concrete M25 Design Mix

Construction of Urban Primary Health Centre;PLINTH BEAMS Concrete M25 Design Mix

Construction of Urban Primary Health Centre;LINTEL BEAMS Concrete M25 Design Mix

Construction of Urban Primary Health Centre;ROOF BEAMS Concrete M25 Design Mix

Construction of Urban Primary Health Centre;ROOF SLAB 125 mm thick Concrete M25 Design Mix

Construction of Urban Primary Health Centre;Sunshades 0.60 m wide 0.10 thick at fixed end and 0.075 thick at free end Concrete M25 Design Mix

Construction of Urban Primary Health Centre;Septic Tank Base slab

Construction of Urban Primary Health Centre;Side walls

Construction of Urban Primary Health Centre;Cover slab

Construction of Urban Primary Health Centre;Supplying, fitting and placing FE 500 grade HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100, 1600 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not weldeD etc., complete as per SS and as directed by the Engineer-in-Charge of the work.

Construction of Urban Primary Health Centre;Brick masonry with CM (1:6) prop: (cement : sand) using second class bricks of size 23 x 11 x 7 cms from approved source including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including all materials and such as labour charges, like mixing cement mortar, constructing masonry, , curing for finished item of work etc complete as per SS and as directed by the departmental officer incharge of the work. But excluding seigniorage charges.

Construction of Urban Primary Health Centre;Plastering 12mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. But Excluding Seigniorage Charges. (OUT SIDE PLASTERING)

Construction of Urban Primary Health Centre;Plastering 20mm thick i in CM(1:5) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work . but excluding seigniorage charges (INSIDE PLASTERING)

Construction of Urban Primary Health Centre;Plastering with cement mortar (1:3), 12 mm thick on Rcc work aas per technical specification Section 1300 & 2200 MORTH including cost and conveyance of all materials and labor charges for mixing cement mortor, laying, finshing the surface true to alignment and curing as per SS and as directed by the departmental officer incharge of the work. But excluding seigniorage charges.

Construction of Urban Primary Health Centre;Providing impervious coat to exposed RCC roof slab surfaces with CM (1:3) prop.20mm thick mixed with 1Kg per one bag of cement, laid over roof slab when it is green,including cost of all materials and all operational,incidental and labour charges mixing for motar ` laying, rendering smooth and thread lining, curing including rounding off junctions of walls and slab for finished item of work etc., complete but excluding seignorage charges and as directed as per SS etc., complete by the departmental officer incharge of the work.

Construction of Urban Primary Health Centre;Painting to new external walls with two coats plastic emulsion paint over primer coat of approved brandafter thoroughly brushing surface to remove dirt and remains of loose powdered materials including cost and conveyance of materials to work and all oprational, incidental,labour charges for finished item of work as per SS and as directed by the departmental officer incharge of the work.

Construction of Urban Primary Health Centre;Painting to new internal walls with two coats plastic emulsion paint over primer coat of approved brandafter thoroughly brushing surface to remove dirt and remains of loose powdered materials including cost and conveyance of materials to work and all oprational, incidental,labour charges for finished item of work as per SS and as directed by the departmental officer incharge of the work.

Construction of Urban Primary Health Centre;Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge of the work for finished item of work

Construction of Urban Primary Health Centre;Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ?C? channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ?C? Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer?s specification & drawing for finished item of work BMT-N-02

Construction of Urban Primary Health Centre;Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM). coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6? Tower bolt ? 2 Nos., 6? D handles ? 2 Nos., 10? Aldrop ? 1 No., Butt Hinges ? 6 Nos, Mortise Lock of approved quality ? 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Double leaf Door BMT-N.46

Construction of Urban Primary Health Centre;Providing and fixing factory made uPVC white colour casement/Casementcum fixed glazed door comprising of uPVC multi-chambered frame, sashand mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll formingprocess of required length (shape & size according to Upvc profile),uPVC extruded glazing beads of appropriate dimension,EPDMgasket,zinc alloy (white powder coated) 3D hinges and one handle oneach side of panels along with zinc plated mild steel multi point lockinghavingtransmission gear, cylinder with keeps and one side key, G.Ifasteners100 x 8 mm size for fixing frame to finished wall and necessarystainlesssteel screws, etc. Profile of frame & sash shall be mitred cut andfusion welded at all corners, mullion (if required) shall be also fusionweldedincluding drilling of holes for fixing hardware's and drainage ofwater etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required sizeand of approved quality, all complete as per approved drawing & directionof Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealent . Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Casement door with top hung ventilator with 3D and S.S. frictionhinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of doorupto 2.50 sqm) BMT-N.84.B

Construction of Urban Primary Health Centre;Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm). BMT-P.80.B

Construction of Urban Primary Health Centre;Providing and fixing of top hung Ventilators made of pre-painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns thick and section for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to have rebate for glazed shutter with a provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6? (152.4mm) pitch etc., complete for finished item of work. Single openable ventilator shutter size of 2? 0? x 2? 0? (609.6 x 609.6mm) outer frame section size of 80 x 45mm, shutter frame section size of 52 x 25mm thick BMT-P.56

Construction of Urban Primary Health Centre;Flooring with vertified tiles1st quality not less than 598x598x8mm thickness set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab oncluding neat cement slurry of honey like consistency spread @ 3.30 kgs/sqm and jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc., complete, including mixing of cement mortar ,laying in position,curing ,lift charges etc., complete for finished item of work, but including the cost of conveyance of all materials

Construction of Urban Primary Health Centre;Providing skirting to internal walls to 20 cm height/risers of steps with vetrified tiles 7.30 mm thick length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water for finished item of work etc., complete as per SS and as directed by the departmental officer incharge of the work

Construction of Urban Primary Health Centre;Flooring with non-skid red or white full body Ceramic floor tiles of size 300 mm x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and overheads & contractors profit complete for finished item of work.

Construction of Urban Primary Health Centre;Providing dadooing with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge flushed to wall surface set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work.

Construction of Urban Primary Health Centre;Supply and delivery of PVC Pipes 25mm dia medium 2mm thick for inserting in slab for electrification etc complete as directed by the departmental officer incharge of the work.

Construction of Urban Primary Health Centre;Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm of ISI brand this rate includes cost and convenyance etc complete as per SS and as directed by the departmental officer incharge of the work