Municipality Tender

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion

Construction of un-reinforced, at expansion and construction joint only plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 M30 (grade) coarse and fine aggregate confirming to I.S: 383,maxium in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher, using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125mm thick polythene film wedges steel plates including leveling the form work as per drawing) spreading the concrete with shrives, rakes compacted using needle and plate vibrator and finished in continuous operation including provision of concrete and expansion construction joints, primer, sealant and construction of joints, admixtures as approved, curing of concrete slabs for 14 days and water finishing to lines and grade as per drawing

Conveyance of surplus excavated earth to lead of 1 Km from work spot including all labour charges etc complete

Dismantling of Clearing away carefully stacking or cement concrete of man holes including all labour charges

Dismantling of Brick masonary in CM(1:3) prop using fly ash bricks including cost and conveyance of all labour charges etc complete(depth upto0.23cm)

Brick masonary in CM(1:3) prop, Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 - 225 x 100 x60 mm including cost and conveyance seignorage fee mixing of cement mortar and laying of bricks and mortar to specified thickness watering curing including scaffolding hire and operational charges of machinery all labour charges and all water lead charges etc complete for finished item of work

Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames with ISI marking anywhere in A.P., F.O.R. destination including, loading, un-loading & stacking at site but excluding all taxes( H.D.-20 with 560mm dia. Clear opening

Plain Cement concrete(1:2:4) using 20mm nominal size graded HBG metal including costand conveyance of all materials and labour charges etc. complete

Plastering withCM(1:5) using 12mm thick including costand conveyance of all materials and labour charges etc. complete

Plastering withCM(1:3) using 20 mm thick including costand conveyance of all materials and labour charges etc. complete

Excavation for inspection chamber in soil using manual means for carrying of cut earth to embankment site with initial lift of 3 mts and lead upto 50 m

Collection , supply & filling sand including cost and conveyance of all materias and labour charges including watering, tamping, etc complete

Plain Cement concrete (1:4:8) using 40 mm dia HBG metal including cost and conveyance of all materials and labour charges etc completed

Plain Cement concrete(1:2:4) using 20mmmetal using concrete mixer with nominal size graded HBG metal including costand conveyance of all materials and labour charges all incidentila and operatinal charges for the work work , curing etc. complete

Brick masonary in CM(1:3) prop, Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 - 225 x 100 x60 mm including cost and conveyance seignorage fee mixing of cement mortar and laying of bricks and mortar to specified thickness watering curing including scaffolding hire and operational charges of machinery all labour charges and all water lead charges etc complete for finished item of work

Plastering withCM(1:5) using 12mm thick including costand conveyance of all materials and labour charges etc. complete

Plastering withCM(1:3) using 20mm thick including costand conveyance of all materials and labour charges etc. complete

Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames with ISI marking anywhere in A.P., F.O.R. destination including, loading, un-loading & stacking at site but excluding all taxes. ( 24x18 HD 20 )