Municipality Tender

Civil work;110 mm (OD) HDPE PIPE Tee

Civil work;110 mm (OD) HDPE PIPE End cap

Civil work;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes and other incidental charges etc., complete. as per SS and as directed by the departmental officer incharge of the work 110 mm DI D/F Sluice Valves

Civil work;Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces. This rate including all labour charges etc., complete as directed by the departmental officer in charge of the work. 110mm dia sluice valve

Civil work;Supply and delivery of MS. Bolts and nuts with washers best quality including coast and conveyance of all materials labour charges, taxes etc., complete as per SS and as directed by the departmental officer incharges of the work

Civil work;Supply and delivery of 6mm thick rubber sheet best quality including coast and conveyance of all materials, taxes etc., complete as per SS and as directed by the departmental officer incharge of the work

Civil work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification

Civil work;CC road cutting including slacking of excvated material, concrete including water bound macadam as directed by the departmental officer in charge of the work and as per SS

Civil work;Collection and supply of crushed dust from approved quarry including conveyance loading and unloading and labour for filling of trenchesfor filling in the prepared barre of the road in between the two drain walls and compacting y means of flate vibrator and watering sectioning filling etc., to loss thickness as follows etc., completed as directed by the departmental office incharge of the work But excluding seignorage charges etc, complete

Civil work;Lowering, laying, jointing and testing of the following sizes of HDPE pipes, fittings with water and testing to required pressure. This rate including all labour chrges and all jointing material and all incidental charges etc., complete as directed by the departmental officer in-charge of the work. 110mm HDPE Pipe

Civil work;Supply, delivery and manufacturing of MS. Pipes and specials including cost and conveyance of all mateials and all other incidental charges and etc., complete as per ss and as directed by the departmental officer incharge of the work

Civil work;RCC M- 20 Nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering for culvert bed blocks and slabs

Civil work;Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded (BLD-CSTN-2-18)

Civil work;P.C.C.(1:4:8) using 40mm HBG metal from approved quarry including cost, conveyance of all materials to work site, labour charge, mixing with machine, laying in position, ramming, neat finishing, curing etc., complete as per SS and as directed by the departmental officer-in-charge of work. But excluding Seigniorage charge.

Civil work;Providing Concrete for plain/ reinforced concrete (1:2:4) Nominal mix in open foundations using 20 mm nominal size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including cutting for 14 days complete as per drawings and technical specifications

Civil work;Making connection of G.I. distribution branch with G.I. main by providing and fixing tee, including cutting and threading the pipes and fixing tee etc., complete. Reference to specifications. BIS No.783/85(excluding cost of materials)