Municipal Corporation Tender

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation excluding contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD using 25

Supply and placing of the RCC M20 (Design Mix) concrete corresponding to IS 456 using weigh batcher / 60% of mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) 40% of 12mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and including seigniorage charges, on all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work. For culvert pre cast slab

Plastering in CM (1:4) 12mm thick including cost and conveyance of all materials, seigniorage charges and labour charges for mixing of mortor watering curing etc.

Bailing out water from drain with oil engine drivern pump sets incluidng hire charges fuel charges wages of driver and helper etc., complete as directed by the departmental authorites

Providing High Yield Strength Deformed ( HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) Steel bars of SAIL / VSP / TATA (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including all materials etc., complete for finished item of work as per SS.

Supply & delivery of HDPE 315mm dia pipe including cost and conveyance of all materials etc., complete as directed by the departmetnal authorites

Carting away the surplus earth, cement concrete, brick and stone debris from the work site with a lead of 2 Kms. Beyond initial lead including loading, unloading and conveyance etc., complete as directed by the departmental authorities

Supply delivery and fixing of MS Iron grating including cost and conveyance of all materials cutting welding and labour charges etc., complete as directed by the departmental authorites

Supply, delivery and filling of Quarry dust from approved quarry including cost and conveyance of the all materials and labour charges for spreading, sectioning, ramming and watering etc., complete as per SS

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH RCC