Municipal Corporation Tender

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose and Module Horizontal/Vertical Cover Frame covering to switches/sockets control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings with Modular Accessories as directed by the departamental authorities. (MAT-02748, ELEC-1.5.1, S. No. 28, SSR 2023-24)

Conveyance of surplus earth from the work site with a lead of 2 km including loading and unloading charges as directed and as per SS with extra leads and lifts

Supply and placing of the RCC M25 (Design Mix) concrete corresponding to IS 456 using weigh batcher / mixer 20mm ,12mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, 380 Kgs fine aggrregate (sand) coarse aggregate, water etc., to site and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work.(Rate will be paid based on the design mix if cement quality is reduced) with extra leads and lifts

Supply and run of 2 of 56/0.3 (4.0 Sq.mm) FR PVC insulated flexible copper cable in existing pipe for mains including all labour charges etc., complete for run of mains as directed by the departamental authorities using Finolex / RR kabel / Havells KEI / Polycab / Gloster / Goldmedal / GM make wire.MAT02796

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks BMW-G.01

Walling with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including complete for finished item of work, but including the cost of conveyance of all materials.

Painting, priming coat on new plastered surface to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS

Plastering in CM (1:4) 12mm thick including cost and conveyance of all materials, charges and labour charges for mixing of mortor watering curing etc. with extra leads and lifts

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (Brick worlk)

Supply of Chequered CementConcrete heavyduty tiles conforming to IS:13801using aggregates,cement,pigmentof size300x300mm and thickness25 mm of any shades laid over a bed of CM (1:5) 20 mm thick fixed with cement slury and jointing with cement putty mixed with colour pigment including cost and conveyance of all materials and labour charges for fixing watering, curing etc.,complete as per ss .

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

PVC solvent cement (1000ML)

f) For slab

Plastering with CM (1:4) mix 20mm thick including cost and conveyance of all materials and labour charges for watering etc. complete. with extra leads and lifts

Supply and delivery and fixing RCC jollies 50mm thick of approved size and design etc. complete (MAT-01589, BMS-W.17, S. No. 999, SSR-2023-24)

Engaged hand breaker on hire basis including hire charges operational charges complete as directed by the departmental authorities Air compressor 5 cmm ( electric ) (HIR 00136 )

a) For footings

g) For Sunshades (0.075+0.05/2) thick,0.60m width

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS (Internal Walls)

Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyltape. The sheets are provided with anti capillary grove cost, conveyance and labour charges for errction in position etc.., complete as per the directions of the departmental authorites. (MAT-01615, BMS-W.45 Pg.No.1026 SSR 2023-24)

Supply of ISI 25mm outer dia medium grade with IS:9537 part 3 FRLS regid PVCpipe Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM /Sudhakar /Polycab/Anchor/ Polyline/ Orbit/ AKG (ELEC-1.2.2, MAT-02676, S. No. 1, SSR 2023-24)

supply & delivery of 50x50x2.50mm thick GI square pipe including cost and conveyance of all materials etc complete

110 mm dia PVC tee

Providing and fixing factory made uPVC white colour sliding glazed doorcomprising of uPVC multichambered frame with in-built roller track andsash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanizedmild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVCextruded glazing beads, uPVC extruded interlock and uPVC extrudedInline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy(white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmissiongear with keeps, zinc alloy (white powder coated) cresent lock (ifrequired), stainless steel (SS 304 grade) body withadjustable doublenylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steelscrews etc. Profile of frame & sash shall be mitred cut and fusion weldedat all corners, including drilling of holes for fixing hardware's and drainageof water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backerrod of required size and of approved quality, all complete as per approveddrawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes,wire mesh and silicon sealent Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of(big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (BMT-N.85.B)

b) For plinth beam

c) For columns

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS (External Walls)

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores any where in AP excluding all taxes.

e) For Roof beam

110 mm dia PVC Elbow

Supplying and Fixing of uPVC ( Unplastered polyvinyl Chloride) windows made of uPVC profile. All sections of frames, sash and mullion shalll be reinforced with galvanized mild steel, except but in corners of the windows. ( Outer Frame 74x60x56mm) Mullion (72x60x36) uPVC Panel 158x20mm, single glass bead 34x18mm, Panel Glass bead 19x18mm, Bay Pole 60x60mm) (S. No. 801, P. No. 122 New SSR - 2023-24)

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and areproduced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flow gurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compound shaving the same physical Properties for Hot and ColdWater (IS15778:2007)- 28.60mm OD Pipe-SDR 13.5

Collection and Supply of dust for filling including Cost and coneyance, Seinorage charges, Spreading, Sectioning etc., complete.with extra leads and lifts

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including, complete for finished item of work, but including the cost of conveyance of all materials.(900x900 of 10 to12mm thick )

Labour charges for fabrication and fixing in position including cost of welding rods,cutting etc.,complete as per the directions of the departmental authorities BMM-V.14

Providing High Yield Strength Deformed ( HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) Steel bars of SAIL / VSP / TATA (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including all materials etc., complete for finished item of work as per SS. with extra leads and lifts

d) For Lintel beam

110 mm PVC pipe for drain

Ceiling Plastering with CM(1:3) 12 MM thick including cost of all materials like cement, sand, water and labour charges etc. complete, for finished item work.