Municipal Corporation Tender

Supplying & fixing SINGLE PANEL 30 mm thick PVC DOOR, door shutters with shutter frame and Infill panel made from PVC material, the shutter frame made out of PVC extruded sectionshaving overall dimensions of 6 0mm x 30 mm with wall thickness of 1.3 mm ± 0.3 mm, with the Infill panel made out of multi chambered seamless hollow PVC extruded panel having overall dimensions of 610 mm x 20 mm having wall thickness 1 mm ± 0.2 mm with the shutter frame meter cut and joined at corners and all the hardware locations reinforced with special polymeric barsas per drawing including providing special PVC braket on hinge side, etc complete (BMT-N.53)

Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete with extra leads and lifts

Supply and Delivery of Quarry Dust from approved quarry including cost and conveyance of all materials labour charges, spreading, sectioning, ramming, watering etc complete as per SS. with extra leads and lifts

Providing M 10 using 40mm HBG metal from approved quarry including cost and conveyance Seigniorage charges of all materials and labour charges and Machine mixing Laying, Vibrating, Watering, Curing excluding contractors profit on seignorage charges etc., complete as per SS.with extra leads and lifts.

f) Roof beams

g) Slab for Room

a) Footings for Room

Supply of ISI 25mm outer dia medium grade with IS:9537 part 3 FRLS regid PVCpipe Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM /Sudhakar /Polycab/Anchor/ Polyline/ Orbit/ AKG( ELEC-1.2.2)

Supply and fixing of Modern Hind Ware make flat back wash basin 1st quality confirming to IS:2556-part-4:1972 with waste fittings like rubber pllug chain.32mm nominal size C.P. fitting with parallel pipe thread confirming to IS;2963-1979 and fitted with 15mm nominal bore chromium plated piller tap of 1st quality indian make 400 grams Seiko/Senior/Nice/Esso or equivalent Complete with standred CI brackets including wooden block :630x450mm Double C.P. piller cock.23" High quality glazed hand wash of approved make and colour including all accessiories for fixing etc., complete.Page no.98 item no.157 including cost of all fixtures

d) Columns

Slab for Toilet

Providing impervious coat to exposed RCC roof slab surface with CM (1:3) 20mm thick with 1kg of water proof compound per Bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, including convyenace charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work with extra leads and lifts

Supply, delivery and fixing of TPN 8 way DB with IP-43 protection including all labour charges (ELEC-2.13.5)

e) lintel beam

h) Sunshades

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame andcover of 20 Kg. including labour charges

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF0.9, Surge protection: 2KV,THD15%, with inbuilt driver and frosted cover CCT: 3000K -5700K,minimum CRI70, .etc., complete. . Makes: Wipro / Phillips /Lighting Technologies(LT) / GE / Crompton / Bajaj / VIN b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.(ELEC-3.8.13)

Brick work with cm 1:6 using 2nd class bricks including cost and conveyance of all materials and labour charges for watering with extra leads and lifts

Providing and fixing factory made uPVC white colour slidingglazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads, uPVCextruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle onone side of extreme panel along with zinc plated mild steel multi pointlocking having transmission gear with keeps, zinc alloy (white powdercoated) touch lock with hook (if required for wire mesh panel), stainlesssteel (SS 304 grade) body with adjustable double nylon rollers (weightbearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixingframe to finished wall and necessary stainless steel screws etc. Profileof frame & sash shall be mitred cut and fusion welded at all corners,including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shallbe filled with weather proof silicon sealent over backer rod of requiredsize and of approved quality, all complete as per approved drawing &direction of Engineerin- Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / doubleglazing bead of appropriate dimension. (Area of window above 1.75 sqm upto 2.50 sqm.) Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted . But no extra payment on this account shall be made. (MAT-05449)

Plastering with CM (l:4) 20mm thick including cost seignorage and conveyance of all materials and labour charges, watering etc., complete as per SS.with extra leads and lifts

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS (External Walls)

Supply of 2 Module Modular type Electronic step type Fan Regulator Makes: Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Ducor /L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA) (MAT-02846)

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose and Module Horizontal/Vertical Cover Frame covering to switches/sockets control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings with Modular Accessories as directed by the departamental authorities.

Flooring with ceramic tiles, set over base coat of cement mortar (1:8) 7.3 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, complete for finished item of work, but including the cost of conveyance of all materials.

Supply and fixing of (48") Sweep 230v AC 50HZ ceiling fans of Bajaj / Cromprton / Orient make with 3 blades and double ball bearings with all standared accessaries transportation and giving connection with twise core wire including labour charges etc., complete (ELEC-5.1.4)

Ceiling Plastering with CM(1:3) 12 MM thick including cost of all materials like cement, sand, water and labour charges etc. complete, including seigniorage charges etc., complete for finished item work with extra leads and lifts

Supply and Transportation of 1.0HP (25x25mm) Single phase Mono block CI body motor pumpset confirms to IS 9079:2002Makes : As per list of recommended brands as category I. (ELEC 5.4.11)

Supply and fixing of 6-32A 10 KA SP MCB C-courve for MDS / Legrand make with necessary wiring connections etc., complete (ELEC-2.10.1)

Manufacturing, Supply, Delivery and fixing of M.S. Iron Gate , MS Grill using with M.S. Angulars, M.S. flats including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., , complete.as directed by the departmental authorities.

Plastering with CM (1:4) mix 12mm thick including cost and conveyance of all materials and labour charges for watering etc. complete.with extra leads and lifts

Providing and fixing 35mm thick BRAND FACTORY MADE MOULDED DOOR SHUTTER consisting of sold core single leaf flush door of 30mm thickness, lipped with 15mm (5mmX3) thick X 30mm width on one stiles and top rails and 10mm (5mmX2) thick X 30mm width on the other stiles and bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in different panel and / or prelam colour son one side after routing the moulded design on flush door and 2mm prelam Pac sheet on other side using rubber adhesive on flush door and solvent cement adhesive on Pac lipping etc. complete as per direction of Engineer in-Charge, manufacture specification and drawing(BMT-N.06)

Painting, priming coat on new plastered surface to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tank and including labour charges for fixing of water storage tank BMW-G.01

Supply, Installation and commissioning approved make floor mounted Close coupledEWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed onEWC withall internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wallflanges all of approved make etc. complete for finished item of work in all respects:White Colour

c) for plinth beam

Conveyance of excavated earth with an average lead of 2 KM including loading, unloading etc; complete as per SS and also as per the directions of departmental authorities. Add extra for leads and lifts.

Supply and placing of the RCC M25 (Design Mix) concrete corresponding to IS 456 using weigh batcher / mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work.with extra leads and lifts.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Hard rock (blasting prohibited)

i) Staircase

Providing glazed tiles for walling set over a bed C.M. (1:5) and pointingwith mix (l:3) and sebora putty including cost and conveyance of all materials and labour charges etc., complete.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and areproduced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flow gurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compound shaving the same physical Properties for Hot and ColdWater(IS15778:2007)

b) Pedestal for Room

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc. complete, including, complete for finished item of work, but including the cost of conveyance of all materials.(900x900 of 10 to12mm thick)

Supply and delivery of RCC Jollies of Size 0.75x0.50 with 40mm thick including cost and conveyance of all materials and labour charges etc., complete as directed by the departmental authorities.

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable watersupplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as perspecification in light Grey/Natural Ivory Grey/ Any other Color (exceptWhite)inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.