Municipal Corporation Tender

CC Drains;Laying 375mm (1'-3") size Cement Concrete type design Drain using CC (1:3:6) mix using 20mm HBG metal, machine mixing with 100mm thick bed & 150mm thick side walls and plastering the exposed surface with CM (1:3) mix 12mm thick, watering for curing including cost and conveyance of all materials and labour charges etc., complete as per directed by the engineer in charge

CC Drains;Laying VRCC M30 Grade mix using 20mm size Hard Broken Granite Metal (machine crushed) from approved quarry, machine mixing, ramming, centering and watering for curing including cost and conveyance of all materials and all labour charges but excluding the cost of steel and its fabrication charges etc., complete as per SS and as directed by the Engineer - in - Charge. BLD-CSTN ? 2-13 For slabs

CC Drains;Providing High Yield Strength Deformed (HYSD) / TMT / Mild Steel (Fe415 / F500 grade) as per IS 1786 - 1979) of different diameters for RCC Works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc complete for finished item of work in all floors.

CC Drains;Collection,supply and spreading With Crusher Dust from approved quarry including cost, conveyance and segniorage charges, etc complete including spreading, sectioneing etc complete-1cum

CC Drains;Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of construction joints, and construction joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

CC Drains;Providing Foundation stone for inaguration including charges and placing in position including cost and conveyance of all materials and all labour charges etc., complete as per SS and as directed by the Executive Engineer-in-charge.