Municipal Corporation Tender

Earth work excavation by mechanical means of strucures as per drawing and technical specifications Clauses 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Supply, delivery and filling of Quarry dust from approved quarry including cost and conveyance of the all materials and labour charges for spreading, sectioning, ramming and watering etc., complete as per SS.

Providing C.C (1:4:8) using 40mm HBG crushed metal from approved quarry including cost and conveyance of all materials and labour charges and Machine mixing Laying, Vibrating, Watering, Curing for 14 days etc., complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

Supply and placing of the RCC M20 (Design Mix) concrete corresponding to IS 456 using weigh batcher / mixer 60% of 20mm size graded machine crushed hard granite metal (coarse aggregate) 40% of 12mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and including seigniorage charges, on all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work.( with form work) Culvert Slab

Supply and placing of the RCC M20 (Design Mix) concrete corresponding to IS 456 using weigh batcher / mixer 60% of 20mm size graded machine crushed hard granite metal (coarse aggregate) 40% of 12mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and including seigniorage charges, on all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work. (with out form work) Body walls

Providing centering charges to drain walls including cost and conveyance of all materials and labour charges etc., as directed by the departmental authorities.

Plastering in CM (1:4) 12mm thick including cost and conveyance of all materials, seigniorage charges and labour charges for mixing of mortor watering curing etc. complete.

Supply, delivery, fabrication and fixing in position of MS grating including cost and coveyance, welding, grinding of all materials and one coat redoxide paint etc., complete as directed by the departmental authorities.( size 1.50m x1.50m ),

Carting away the surplus earth, cement concrete, brick and stone debris from the work site with a lead of 5 Kms. Beyond initial lead including loading, unloading and conveyance etc., complete as directed by the departmental authorities.

Providing High Yield Strength Deformed ( HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) Steel bars of SAIL / VSP / TATA (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including all materials etc., complete for finished item of work as per SS.

Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadam specification ( 5th Revision) as per Table 400-13, including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification.406 (5th revision) for finished item of work.

Bailing out of water from Drain with oil engine driven pump sets including hire charges, fuel charges, wages of driver and helper etc., complete as directed by the departmental authorities

Laying Sand Bags in the stipulated places including cost of empty cement bag, sand, thread, stiching charges and labour charges with 13.615 % overhead charges and contractors profits.complete as directed by the departmental authorities

Providing BT patch work for pot holes using 40-45 mm HBG metal with reavired quantity of 12mm to 14mm size HBG key chips and 42Kgs of 80/100 grade Bitumen for 1 cum of work for filling the pot holes including removal at loose material in the pot holes. Trimming the edgs to provide firm vertical faces, clearing applying tack coat filling the pot holes com pacted with the power road roller and finishing including cost and conveyence and all T & P chargs for all labourcharges for all operating charges etc complete for finished item of work and directed by Engineer-in-Charge

Providing BT Wearing coat 20mm thick over the existing BT surface with 0.27 cum of 10-12mm size HG chips per 10sqm,80/100 grade Bitumen per 1cum of chips laid over tack coat of 7.50Kgs of Bitumen per 10sqm ver WBM surface using a total qty of 21.54 kgs of Bitumen 80/100 grade including cost and conveyence of Bitumen and all other labour chargs for brushing cleaning mechanical heating of Bitumen to required temparature mechine mixing of Bitumen and chips spreading the premix to the required camber and rolling with power roller of 8-10 Tonns and hire and operational chargs and T&P etc complete

Providing B.T. Seal coat with 0.09 cum of 5 to 7mm IRC size HBG machine crushed chips per 10sqm including cost and conveyance to road side and stacking to departmental guage for pre-measurements, premixed using a total quantity of 9.80 Kgs. of bitumen 80/100 grade per 10sqm laid simultaneously along with BTSD/BTRC including cost and conveyance of bitumen and all other materials to site and labour charges for brushing, cleaning, mechanically heating of bitumen to the required temperature, machine mixing bitumen and chips, convey the premix to side by wheel borrows, spreading premix, sectioning to the required camber and rolling with 8-10 tonne power road roller and hire and operational charges of T&P and power road roller, barricading and diversion of traffic, providing caution boards and banner flags during day time and danger lights during night time etc., complete for finished item of work as per APSS No.1512.