Municipal Corporation Tender

110mm flanges

110mm collors

100mm CID joints

110mm HDPE TEE

110mm Bend

110mm DUMMIES

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)-RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.

Earthwork excavation in Ordinary soil by Mechanical Means upto 3 m depth for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(B)) - 1 Cum

Filling with dust for trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH (revised RBR-FNDN-2.i)

Laying and Jointing of HDPE Pipes by butt fusion welding as per IS:7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to t he required pressure.

Supply and Delivery of Bolts and Nuts (1/2" to 1") including taxes and conveayce etc. complete as per SS

Supply and Delivery of 6mm thick Rubber packing including taxes and conveyance etc. complete as per SS

Providing House Service Connections by providing clamp saddles for tapping from HDPE mains with MDPE Fusion tapping saddle with female metal thread (SS-304) as per BSEN 12201/3 EN 1555/3 or ISO 8085-3 with pressure rating as PN 12.5 compression elbow with one side compression end suit 1/2" (20mm OD) MDPE pipe and other side with male off-take with SS-304 material inserts of size 1/2" BSP{ threads body nut and cap polypropylene clip ring POM (Acetylicresin) and O ring of NBR material as per ISO 14236-2000 standards wioth pressure ratingPN 16 Compression elbow with both side compression end to suit 1/2" (20mm OD) MDPE pipe body, nut and cap polypropylene clip ring POM (Acetylicresin) and O ring of NBR material as per ISO 14236-2000 standards wioth pressure ratingPN 16 . including all taxes transportation and other levies and cduties excluding GST & Seignorage etc, on HDPE mains .including all labour charges etc.complete

Provision for Seignorage charges

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.749 %

Unforeseen item