Municipal Corporation Tender

Providing Almarah with Kadapa Slab Stone of 0.05m (2") thick including cost, conveyance and fixing charges as directed by departmental authorities.

Plastering for walls in CM (1:4) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete.

Roofing: - Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove BMS-W.45

Manufacturing, Supply, Delivery and fixing of M.S. Iron Gate , MS Grill using with M.S. Angulars, M.S. flats including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., , complete.as directed by the departmental authorities.

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including, complete for finished item of work, but including the cost of conveyance of all materials.(600x600 of 8mm to10 mm thick )

Supply of CR sheet pressed section windows with hallow metal section frame of 65x40mm of 125mm thick (having centrally partition with F4B section) and shutter consists of I Section frame and 0.8mm thick vertically embossed or sheet providing guard bars of 12mm thick round M.S. bars at 110mm thick etc., and handles, stays etc., inclusive of one coat of red oxide premier etc., complete as per the direction of departmental authorities.

Supply and delivery of C.R.pressed section steel doors with frame of 100mm x 40mm thick shutter made of l.25 mm thick of C.R.Sheet having front sheet vertical embossing and rear side horizontal embossing both put together spot welding including cost and conveyance of all materials and including hold bushes M.S. exidished hinges tower bolts aldrop handles etc.complete as per the drawing including cost of red oxide premier etc.,complete as per the directions of departmental authorities.

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS for internal walls

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS for External walls

Painting with Synthetic Enamel Paints -Two coats -for New Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Conveyance of excavated earth for a lead of 2 KM including unloading, loading, spreading, sectioning etc., complete as directed by the departmental authorities

Collection and Supply of Dust for filling including Cost and coneyance charges, Spreading, Sectioning etc., complete.

Providing quarry rubbish spreading in layers not more than 150 mm thick, sectioning to required camber and gradient, watering and compacting each layer to protors density with OMC compaction using 80 to 100 KN capacity vibratory roller including cost and conveyance of all materials, water etc., to site, hire and operational charges of power roller and other T&P etc., complete duly maintaining the required camber and gradient in the formation as directed by Engineer-in charge .

Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadam specification ( 5th Revision) as per Table 400-13, including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification.406 (5th revision) for finished item of work.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH

Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete

Supply and placing of the RCC M30 (Design Mix) concrete corresponding to IS 456 using weigh batcher / mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and including seigniorage charges, on all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work as per SS for Columns up to 3.66mtrs Height

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. Unit = cum. including cost and conveyance of all materials and labour charges etc,Complete.

Supply and Fixing of 25mm dia 1.8mm thick surface PVC Pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., Complete.(MAT-02676)

Wiring with 2 runs of 14/0.3mm (1.0Sqmm) Fire Retardant (FR) PVC insulated flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, ceiling rose and module Horizontal/ Vertical Cover Frame covering to switches/ sockets control box including all labour charges etc,. complete for light, bell, fan and exhaust fan points in Non-Residential Buildings with Modular Accessories as directed by the departmental authorities.

Supply of 48" (1200mm) Sweep star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator. Makes : As per list of recommended brands ELEC-5.1.3 (MAT-03599)

Supply of stepped type Electronic Regulator. Makes : As per list of recommended brands etc., complete as directed by the departmental authorities.(MAT-02817)

Supply and Fixing of 20-24W, 1100mm length LED Batten light with extruded Aluminium housing and poly corbonate cover input voltage AC 220-260 Voits with PF0.9, Surge protection 2KV, THD 15 % with inbult driver and frosted cover CCT 3000K- 5700K, minimum CRI 70 etc., complete as directed by the departmental authorities. (MAT-03348)(Elec-3.8.13)

Supply of 7.0W to 9.0W LED Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base, Makes : As per list of recommended brands. etc., complete as directed by the departmental authorities. MAT-03287

Providing of Hand Railing including RCC posts and RCC Handles including cost and conveyance of all materials to work site and all operational ,incidental ,labour charges etc;complete for finished item of work as per SS.

Providing Name board with embrossing letters including cost and conveyance of all materials and all labour charges etc;complete as directed by departmental authorities.

Plastering for walls in CM (1:3) 20mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete.