Municipal Corporation Tender

s14;Supply and filling with sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101)

s14;Laying Cement concrete (1:4:8) using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete. As per APSS 402

s14;V.C.C. (1:3:6) using 20mm (SS-5) HBG M/C Metal and Opc course and fine agregates conforming to IS:383 including cost and conveyance of all materials, Labour charges, Machine Mixing, vibrating, laying in position quring for 21 days For Bed as per APSS -402

s14;V.C.C. (1:3:6) using 20mm (SS-5) HBG M/C graded Metal and Opc course and fine agregates conforming to IS:383 including cost and conveyance of all materials, Labour charges, Machine Mixing, vibrating, centring, laying in position quring for 21 days including centering charges as per APSS - 402 for Side Walls

s14;Plastering in CM(1:3) prop: 12mm thick with dubara sponge finishing including cost and conveyance of all materials and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing including cutting grooves etc complete and as directed by Engineer complete for finished item of work

s14;Providing High Yield strength deformed steel bars (Fe 415 grade as per IS 1786-1979) of different diameters including labour charges for cutting bending to required sizes and shapes placing in position with cover blocks of approved size and tying with binding wire of 20 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site of work, including cost and conveyance of binding wire cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc complete for finished item of work as per (SS No.126 of APSS) and as directed by the Enigneer-in-charge of the work.

s14;Supply and placing of the M20 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Type as per specification-RBR-SBST-5(V) P-559. For Culvert Slab

s14;WBM Grading 2 (using single grade metal) Providing, laying, spreading and compacting stone aggregates of 63 mm HBG M/c metal nominal single size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller/ Vibratory Roller 80-100 kN in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405 MORD. as per RBR-SBBS-10(ii) p.333

s14;WBM Grading 3 (using Single Grade Metal):-Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller/ Vibratory Roller 80-100 kN in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405 MORD / 404 MORTH..