Municipal Corporation Tender

Engaging of Labour for Dismantling of old doors,cleaning of inside flooring and outside flooring including cost and conveyance of all materials and labour charges etc complete.

Supplying and fixing of false ceiling using Plaster of paris Boards 12 mm thick with standard GI ceiling angles, sections perimeter channels including cost and conveyance of all materials and labour charges etc complete (MAT-01286) (BMT-M.51)

Providing and fixing of door frame made from cold roll formed sections made of galvanized (Base steel as per IS277 with zinc of 120 Gms/sqm) colour coated steel sections with total coated thickness of 1mm, primer coated with epoxy primer coat of 5-7 microns thick, finish paint with polyester paint of 12-16 microns. The Section for door frame is to be filled with polyurethane (P.U) form of 40kg/m3. Overall size of frame section should be of 50mm x 50mm. With necessary corner brackets, stiffeners, hinges, and screws. Cement Bonded particle board shutter “Single Leaf” with all round styles “U” section of size 12m x 18m x 12mm made from 0.6 mm thick galvanized, colour coated cold rolled steel profiles with 16mm thick Cement Bonded particle Board with necessary screws fixed at every 1’-0” (304.8mm) intervals. The cost inclusive of MS nickel coated Aldrop of size 250mm long 2nos. 200mm long tower bolt 1no., 125mm handles 2nos., cost and conveyance of all materials at site and applying one coat primer , one coat of luppum and two coats of synthetic enamel paint as per approved design for finished item of work (MAT-01357) (BMT-N.28)

Brick Masonry in CM (1:6) with Bricks with traditional size 23 x 11 x 7 cms 2nd class etc. complete

Providing Plastering with CM including cost and conveyance of all materials like cement, sand, water etc. to site excluding Seigniorage Charges, including all operational, incidential charges on materials and cost of all labour charges for mixing motor, finishing, curing as directed by engineer-in-charge etc. complete for finished item of work (SS 901, 903 & 904)

Plastering with CM (1:3), 12 mm thick for flooring item

Painting to new walls with 1 coat of Plastic Emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911 for internal walls

Exterior walls are painted with one coat of primer and 2 coats of exterior emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911 for external walls

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls

Painting with Synthetic Enamel paints in all shades Grade - II having VOC (Volatile Organic Compound ) content less than 50 grams/ liter. Two coats for old Iron work:

Providing and fixing Pre painted Steel sliding Window/Door fabricated from roll formed sections made of Galvanized steel colour coated /powder coated (Base Steel as per IS 513 ‘D’ quality galvanized as per IS 277 with Zinc of 120 Gms./ Sq.mtr) with total coated thickness of 0.58mm. Primer Coat with epoxy primer of 5-7 microns thick, finished paint with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The External Section for two track Sliding Window should be of 44 x 59mm with a provision for bottom track insert profile of 10x9 mm made of aluminium. Section for Window glass shutter should be of 35x49mm, Section for Window Euro groove should be of 25x24mm made of plastic to accommodate standard accessories, and section for window lap strip should be of 21x4mm made of plastic. Section for Door shutter should be of 35x67mm, Section for Door Euro Groove 25x31mm made of plastic to accommodate standard accessories and size of lap strip should be of 39x41mm. The Window/Door to be panelled with 5mm thick plain float glass. The gaskets are to be made of Ethyl Propylene Diamine Manomer [EPDM]. Corner Brackets for internal and external frame to be made of glass filled nylon. Touch lock to be provided for Window Shutter. Sections are to be cut to length, joined and assembled by means of corner brackets. The above frame to be fixed to Brick/Concrete masonry by using Nylon self-expanding caps and driving MS electroplated 80mm screws into the caps through frames. The Grill for safety for windows to be made of 10mm thick square rod bars with 152mm pitch for complete item of work . For Door there will be no Safety Grill including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work. (MAT-01434)

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame including cost and conveyance of all materials to site, labor charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.

Manufacture, supply and delivery of unplasticised PVCs pipes for potable water supplies confirming to IS: 4985/2000 (Third revision) with bell ends (Socket) as per specification in light Grey / Natural Ivory Grey / Any other Color (except White) inclusive of transportation to the Sub Divisional stores any where in A.P., excluding all Taxes etc. as per SSR 2024 -25 , Sl. No.20, Public Health items.

Supply and fixing of 110 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe fittings including cost and conveyance of all materials to site, labor charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels. (MAT-01947) (BMW-G.60)

Supply and delivery of 42 / 32mm dia UPVC raising column pipe, with standing upto 20 Kgs / CM2 upto 200 Mts of UPVC pipes and specials including transportation,taxes & duties etc., complete the rate including incidental charges etc.,complete as directed by the departmental authorities incharge of work.(MAT-03722)

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks (MAT-01889) (BMW-G.01)

Supply and fixing of wash basin to Toilets are provided as per plan with a provision for fixing the wash basin, W.C. etc only is made with M.S. steel section secured to the walls with toilet bracket provision excluding cost of WC/ Wash basin etc (MAT-01613) (BMS-W.43)

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects:White Colour(EWC (MAT-01792)

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-1995 including cost and conveyance of all materials to site, labor charges for fixing, overheads & contractors profit complete for finished item of work.Urinal bowl (MAT-01804)

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 &IS:17048/2018 specification for copper cable. of As per list of recommended brands of catergory-I Makes: Finolex / RR kabel/Havells/ Finecab/KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/ Anchor /Million / APAR(Anushakthi) in existing pipe with 6A Switch, ceiling rose and 3mm thick Hylam sheet covering to switch control box including cost of all material and all labour charges etc. complete for light, bell, fan and exhaust fan points in Non- Residential Buildings.

Fixing of 36/40W. Tube Light Luminaire on wall/ ceiling with PVC round blocks with all accessories including giving connections and all labour charges etc. complete.

Supply of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 30W, air delivery not less than 220 cubic meter/min and a minimum service value of 7.0, with Regulator. Makes: As per list of recommended brands..ceiling fans (ELEC-5.1.18)

Supply and Fixing of 6A /10A 3/2 Pin Module Modular Sockets-4Nos with shutter ,6A Switch-4Nos for computer board of switch & Sockets make Makes: Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)/Anchor (Roma PLUS)/Precision(Series7)/Honeywell(Blenzepro) with earth continuity including wire leads, earth connections along with all labour charges etc. complete .

Supply and fixing of 4 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 12 Nos S.P. out goings and for 1 No 4 poleIncommer with 1 No 63A FP MCB and 12 Nos 6-32 A 10kA SP MCBs of including internal connections and labour charges for FLUSH Mounting etc.,complete.DB Makes:Legrand (Ekinox 3) / Schneider-A9/Hager -Novello+/ Seimens/Havells STADx/ Lauritz Knudsen (Formerly L&T)-Newrange/Indo Asian-Opti Pro/ HPL (Techno)/ Anchor (Uno Plus)

Providing indipendent earthing by excavating a trench to a depth of 2.10Mtrs. in all soils, as per size specified in the Data, using 40mm dia."B" Class G.I.pipe of 2.50Mtrs. length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equel proportion of Salt and Charcoal in layers and all labour charges etc. complete for small quarters.

Supply and fixing CEMENT BONDED PARTICLE BOARDS (IS 14276) double skin partition using with 10 MM CEMENT BONDED PARTICLE BOARDS made out of G.I. track section of size 50mmx 35mm x 0.55 mm for fixing to the roof and floor and stud section of size 48mm x 35mm x 0.55mm placed in track section vertically at 610mm intervals and at 1200mm intervals horizontally fixed to the wall by means of self expansion screws and caps to the wall and roof. CEMENT BONDED PARTICLE BOARDS is to be fixed both sides of frame work by using self taping screws fixed at every 300mm intervals to the frame work leaving 3 mm gap between two panels. The cost inclusive with one coat of primer and two coats of smooth finish and cost and conveyance of all materials to site, labor charges etc., complete as per the direction of Engineer in charge.