Municipal Corporation Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Municipal Corporation Tender
Civil And Construction
Machinery and Tools
Pipe Line Project
Water Storage And Supply
Opening Date27 Nov 2024
Closing Soon11 Dec 2024
Tender Amount₹ 55,89,00,370
Costs
EMD
₹ 55,89,100Document Cost
Refer DocumentsTender Fee
₹ 29,500
Summary
Providing Water Supply Facilities Like Construction Of Intake Well, Pipelines, Pump Sets, And Elsr, Glsr In Circle-i Area In Vijayawada
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
770537Tender No
29/VMC/CDB/2024-25, Rc.E6-124276/2023Tender Authority
Municipal Corporation ViewPurchaser Address
-Website
http://https://vijayawada.cdma.ap.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 407kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as directed by the Engineer -In- Charge. - For Well Curb
56.13
7515
421865.78
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 407kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as directed by the Engineer -In- Charge. - For Well Steining
605.15
6919
4187329.37
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 407kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as directed by the Engineer -In- Charge. - Bottom Raft
39.27
6323
248308.14
Supply and placing of PCC M-20 (1:1.5:3) Standard Design Mix Concrete grade using coarse aggregate of 20mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including centering and shuttering (form work) , batching, transportation, laying,compacting and finishing of concrete top surface to the required level curing etc., and overheads & contractors profit complete as per Drawing and Technical Specification 1200, 1500 & 1700 MORTH. for finished item of work. (APSS No. 402) and as directed by the Engineer-in-Charge. - Bottom Plug
137.27
6312
866574.53
Sinking of RCC 10 m Inernal dia well in sandy soils, soft disintegrated rock, loamy and clayey soils etc under water either by manual labour,divers or dredgers weighting the top of staining to assist sinking etc., including de-watering until the completion of sinking of the well to the required depth, the dummies of the weep holes pipes are opened for seepage of water into well, including all materials,labour and machinary complete for finished item of work including overheads and contractor profit but excluding GST as per approved drawings and technical specifications 1207 MORTH and as directed by the Engineer - In - Charge. - Well Sinking Upto 2 mtr Depth
2
299909
599818.62
Sinking of RCC 10 m Inernal dia well in sandy soils, soft disintegrated rock, loamy and clayey soils etc under water either by manual labour,divers or dredgers weighting the top of staining to assist sinking etc., including de-watering until the completion of sinking of the well to the required depth, the dummies of the weep holes pipes are opened for seepage of water into well, including all materials,labour and machinary complete for finished item of work including overheads and contractor profit but excluding GST as per approved drawings and technical specifications 1207 MORTH and as directed by the Engineer - In - Charge. - Well Sinking Beyond 2 mtr Upto 4 mtr Depth
2
774260
1548520.38
Sinking of RCC 10 m Inernal dia well in sandy soils, soft disintegrated rock, loamy and clayey soils etc under water either by manual labour,divers or dredgers weighting the top of staining to assist sinking etc., including de-watering until the completion of sinking of the well to the required depth, the dummies of the weep holes pipes are opened for seepage of water into well, including all materials,labour and machinary complete for finished item of work including overheads and contractor profit but excluding GST as per approved drawings and technical specifications 1207 MORTH and as directed by the Engineer - In - Charge. - Well Sinking Beyond 4 mtr Upto 6 mtr Depth
2
806843
1613687.62
Sinking of RCC 10 m Inernal dia well in sandy soils, soft disintegrated rock, loamy and clayey soils etc under water either by manual labour,divers or dredgers weighting the top of staining to assist sinking etc., including de-watering until the completion of sinking of the well to the required depth, the dummies of the weep holes pipes are opened for seepage of water into well, including all materials,labour and machinary complete for finished item of work including overheads and contractor profit but excluding GST as per approved drawings and technical specifications 1207 MORTH and as directed by the Engineer - In - Charge. - Well Sinking Beyond 6 mtr Upto 8 mtr Depth
2
806843
1613687.62
Sinking of RCC 10 m Inernal dia well in sandy soils, soft disintegrated rock, loamy and clayey soils etc under water either by manual labour,divers or dredgers weighting the top of staining to assist sinking etc., including de-watering until the completion of sinking of the well to the required depth, the dummies of the weep holes pipes are opened for seepage of water into well, including all materials,labour and machinary complete for finished item of work including overheads and contractor profit but excluding GST as per approved drawings and technical specifications 1207 MORTH and as directed by the Engineer - In - Charge. - Well Sinking Beyond 8 mtr Upto 10 mtr Depth
2
922107
1844214.5
Sinking of RCC 10 m Inernal dia well in sandy soils, soft disintegrated rock, loamy and clayey soils etc under water either by manual labour,divers or dredgers weighting the top of staining to assist sinking etc., including de-watering until the completion of sinking of the well to the required depth, the dummies of the weep holes pipes are opened for seepage of water into well, including all materials,labour and machinary complete for finished item of work including overheads and contractor profit but excluding GST as per approved drawings and technical specifications 1207 MORTH and as directed by the Engineer - In - Charge. - Well Sinking Beyond 10 mtr Upto 11 mtr Depth
1
968212
968212.61
Sinking of RCC 10 m Inernal dia well in sandy soils, soft disintegrated rock, loamy and clayey soils etc under water either by manual labour,divers or dredgers weighting the top of staining to assist sinking etc., including de-watering until the completion of sinking of the well to the required depth, the dummies of the weep holes pipes are opened for seepage of water into well, including all materials,labour and machinary complete for finished item of work including overheads and contractor profit but excluding GST as per approved drawings and technical specifications 1207 MORTH and as directed by the Engineer - In - Charge. - Well Sinking Beyond 11 mtr Upto 12 mtr Depth
1
1016623
1016623.24
Sinking of RCC 10 m Inernal dia well in sandy soils, soft disintegrated rock, loamy and clayey soils etc under water either by manual labour,divers or dredgers weighting the top of staining to assist sinking etc., including de-watering until the completion of sinking of the well to the required depth, the dummies of the weep holes pipes are opened for seepage of water into well, including all materials,labour and machinary complete for finished item of work including overheads and contractor profit but excluding GST as per approved drawings and technical specifications 1207 MORTH and as directed by the Engineer - In - Charge. - Well Sinking Beyond 12 mtr Upto 13 mtr Depth
1
1067454
1067454.4
Sinking of RCC 10 m Inernal dia well in sandy soils, soft disintegrated rock, loamy and clayey soils etc under water either by manual labour,divers or dredgers weighting the top of staining to assist sinking etc., including de-watering until the completion of sinking of the well to the required depth, the dummies of the weep holes pipes are opened for seepage of water into well, including all materials,labour and machinary complete for finished item of work including overheads and contractor profit but excluding GST as per approved drawings and technical specifications 1207 MORTH and as directed by the Engineer - In - Charge. - Well Sinking Beyond 13 mtr Upto 14 mtr Depth
1
1120827
1120827.12
Sinking of RCC 10 m Inernal dia well in sandy soils, soft disintegrated rock, loamy and clayey soils etc under water either by manual labour,divers or dredgers weighting the top of staining to assist sinking etc., including de-watering until the completion of sinking of the well to the required depth, the dummies of the weep holes pipes are opened for seepage of water into well, including all materials,labour and machinary complete for finished item of work including overheads and contractor profit but excluding GST as per approved drawings and technical specifications 1207 MORTH and as directed by the Engineer - In - Charge. - Well Sinking Beyond 14 mtr Upto 15 mtr Depth
1
1176868
1176868.48
Sinking of RCC 10 m Inernal dia well in sandy soils, soft disintegrated rock, loamy and clayey soils etc under water either by manual labour,divers or dredgers weighting the top of staining to assist sinking etc., including de-watering until the completion of sinking of the well to the required depth, the dummies of the weep holes pipes are opened for seepage of water into well, including all materials,labour and machinary complete for finished item of work including overheads and contractor profit but excluding GST as per approved drawings and technical specifications 1207 MORTH and as directed by the Engineer - In - Charge. - Well Sinking Beyond 15 mtr Upto 16 mtr Depth
1
1235711
1235711.9
Sinking of RCC 10 m Inernal dia well in sandy soils, soft disintegrated rock, loamy and clayey soils etc under water either by manual labour,divers or dredgers weighting the top of staining to assist sinking etc., including de-watering until the completion of sinking of the well to the required depth, the dummies of the weep holes pipes are opened for seepage of water into well, including all materials,labour and machinary complete for finished item of work including overheads and contractor profit but excluding GST as per approved drawings and technical specifications 1207 MORTH and as directed by the Engineer - In - Charge. - Well Sinking Beyond 16 mtr Upto 17 mtr Depth
0.5
1297497
648748.75
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 380kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, centering, shuttering, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) and as direted by the Engineer -In- Charge. - Columns upto unsupported height upto 4.88 mtr
5.64
14903
84055.68
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 380kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, centering, shuttering, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) and as direted by the Engineer -In- Charge. - Intake well roof beams up to unsupported height of 11.59 mtr
7.91
42769
338304.21
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 380kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, centering, shuttering, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) and as direted by the Engineer -In- Charge.. -Lintle Beams upto un supported height of 3.66 mtr
1.24
13950
17298.31
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 380kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, centering, shuttering, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) and as direted by the Engineer -In- Charge. - Tie Beams upto un supported height of 3.66 mtr
2.71
12100
32792.92
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 380kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, centering, shuttering, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) and as direted by the Engineer -In- Charge. - Intake well pump house roof beams up to unsupported height of 5.49 mtr
8.56
14910
127631.65
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 380kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, centering, shuttering, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) and as direted by the Engineer -In- Charge. - Intake well roof Slab of 150 mm thick up to unsupported height of 11.59 mtr
16.05
34740
557582.46
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 380kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, centering, shuttering, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) and as direted by the Engineer -In- Charge. -Lintle Chajja upto unsupported height of 3.66 mtr
0.9
7898
7108.28
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 380kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, centering, shuttering, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) and as direted by the Engineer -In- Charge. - Intake well pump house roof slab of 150 mm thick up to unsupported height of 5.49 mtr
18.11
13191
238898.25
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, including sales and other taxes on all materials etc., complete for finished item of work as directed by the Engineer-In-Charge.- for Intake well Cum Pump House
42.63
94211
4016219.19
Brick Masonry work in CM(1:6) prop (Cement : Sand) in superstructure with traditional size 19 x 9 x 9 cms from approved source having minimum crushing strength of 40 Kg/Sqcm and water absorption not exceeding 20% by weight including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work (APSS No. 501 & 504) as directed by the Engineer-in-Charge. - for Intake well Pump House
19.69
8770
172685.43
Providing Half Brick Masonry work in CM(1:4) prop (Cement : Sand) in superstructure with traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504) and as dircted by the Engineer-In-Caharge - For Intake Well Pump house parapet wall
23.18
1022
23693.44
Plastering 20mm thick in two coats for out side using screened sand with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) and as dircted by the Engineer-In-Caharge - For Intake well Pump house External Plastering
224.08
615
137954.85
Plastering 12mm thick in Single coat for In side using screened sand of Cement mortor Mix 1:4 with Smooth finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) and as directed by Engineer - in - charge - For Intake well Pump House Internal Plastering
141.06
196
27660.46
Ceiling Plastering 12mm thick single coat in CM(1:4) for using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) and as dircted by the Engineer-In-Caharge - For Intake well Pump House roof.
117.76
204
24118.43
Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 - for Intake well Pump house external walls
224.08
259
58162.2
Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 and as dircted by the Engineer-In-Caharge - for Intake well Pump House internal walls
258.82
175
45485.03
Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work and as dircted by the Engineer-In-Caharge - For Intake well Pump House Roof Slab
116.9
651
76161.52
Supply and fixing of Rolling shutter made of 80 x 1.25 mmmachine rolled CRCA laths, inter locked together through their entire length and jointed together at the ends by end-locks , mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipewith brackets, plates, guide channels, stoppers, bottom locking plates, and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer , locks, ball bearings , all accessories etc complete for finished item of work as per special spn:1108 and as dircted by the Engineer-In-Caharge - For Intake well Pump House
9
5091
45819.81
Supply and fixing of pre-painted steel openable windows base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 , finish painted with a polyester paint of 12-16 micronsthick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm with 5 mm thick plain float glass fitted with Ethyl propylene Diamine monomer Gasket (EPDM) and handle made of high grade aluminium powder coated with frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work . Centre fixed both side openable shutter window 5’0”x4’0” (1524mm x1219.2mm). Outer frame section size of 48x50mm. Shutter frame section size of 48 x 25 mm. Mullion section size of 48x50mm. Fixed beading section size of 12x12mm and as dircted by the Engineer-In-Caharge. - For Intake well Pump House
16.2
7005
113489.1
Providing and fixing of top hung Ventilators made of pre-painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns thick and section for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm,section for shutter of 52 x 25 mm x 0.6mm thick, outer frame and mullions to have rebate for glazed shutter with a provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in wall by means of self expandingconcrete/masonry screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc.,complete for finished item of work and as dircted by the Engineer-In-Caharge. - For Intake well Pump House
3.24
7600
24626.72
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 1 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - Delivery - 350mm dia
3
20950
62852.94
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 3 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - Suction - 350mm dia
36
33419
1203087.24
Manufacture, supply and delivery of 10mm thick Mild Steel spirally welded Pipes conforming to IS:3589/2001, including 10% Radio graphic testing and 100% Ultra sonic testing for factory and field welded joints and hydraulic testing to the required test pressure at factory including inlining with cement mortar (1:2) 15mm thick using 4 numbers of 6 mm dia MS rings at each end of the pipe and outcoating with cement mortar (1:3) prop. 30 mm thick by shotcreting or guniting duly providing wire mesh of size 50x50x3mm including cost of MS Plates, welding rods, cement, sand, reinforcement, wire mesh and all other required materials and inclusive of all taxes and duties and delivery of fabricated inlined and outcoated pipes to site and as directed by the Engineer-In-Charge. - For Delivery Manifold - 800mm dia
5
20481
102406.9
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron K9 Class Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m, 5.0m, 5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation to site, unloading & stacking and as directed by the Engineer - in - charge. -800mm dia
30
25040
751218.6
Manufacture, supply and delivery of S.B.R. Quality Rubber as per BIS:12820/89 with confirming to BIS:5382/85, Rubber Gaskets suitable for CI, DI, S/S pipes including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking and as directed by the Engineer - in - charge for 800mm Dia
5
1289
6447.65
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings PN 16 conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work and as directed by the Engineer-In-Charge. - Upto 500 mm dia
582
154
89639.64
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings PN 16 conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work and as directed by the Engineer-In-Charge. - Above 500 mm dia
4697
169
797644.54
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6 Mpa with by-pass arrangement with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation but excluding all taxes and as directed by the Engineer-in-Charge. - 350 mm dia
3
117774
353324.19
Supply delivery of Double Flanged Slant seat Swing Check Valve (NRV) with body and Disc of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with fully encapsulated in RAL 5005 with Min. Coating thickness of 250powder coating inside and outside color Bluerubber & Fusion bonded Electro Static epoxyVulcanized EPDM microns. The EPDM rubber & Epoxy rubber & Epoxy powder should conform to W 270 standards (Drinking water application) and face to face dimensions as per EN 558-1 / DIN 3202-F6 / IS 5312 & Flange connections as per IS:1538 including transportation and as directed by the Engineer-In-Charge. - 350mm Dia
3
117774
353324.19
Lowering CI / DI pipes (all classes) and specials (fittings) with flanged ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 350mm dia
39
450
17563.65
Laying and Jointing of 10 mm thick Mild Steel Pipes manufactured with electric - resistance welding (ERW) or submerged arc welding (SAW) process longitudinally or spirally welded from MS plates conforming to IS:2062, Grade-`A'/ 'B' in suitable lengths to suit the site conditions inclusive of cost of all jointing materials, labour charges and hydraulic testing of pipeline to a required field test pressure in convenient stretches and as directed by departmental officers inclusive of cost of the necessary testing equipment and other incidental and operational charges etc., complete. - 800mm Dia
5
2131
10657.1
Lowering CI / DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 800mm Dia
30
1279
38382.9
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 350mm dia
6
2516
15097.26
Jointing Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 350mm dia
18
1305
23495.22
Jointing Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 400mm dia
6
2009
12054.54
Jointing Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 800mm dia
16
9882
158115.68
Jointing CI / DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete.(Reference to specifications BIS No.3114 /1994 /12288 /1997). and as directed by Engineer-in-charge for 800mm Dia
5
1125
5629.7
Manufacture,supply,delivery of MS grill gates for windows as ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete and as directed by the Engineer-In-Charge.- for Windows
1205
135
163578.75
Painting two coats with synthetic enamel paint over a base coat of red led. The rate includeds cost and conveyance of all materilas at site, labour charges, scaffolding charges etc., complete as directed by the Engineer-In-Charge. - for MS items
17.96
242
4361.05
Manufacture , supply , delivery of MS base for Pumps using I - Sections and Channel , squares etc including Cutting, welding , finishing , applying red oxide paint as primary coat and fixing etc complete and as directed by the Engineer-In-Charge. - For Pumps
292.92
159
46615.29
Earthwork excavation for foundations and removal of the unservicable soils and disposal of all the unservicable soils to the outside the boundary including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work etc as per SS20B (ApSS 308) in Ordinary Soil-Mechanical Means- up to 3.00M as directed by Engineer-In-Charge.
197.75
133
26453.02
Bailing out water from the foundation/pipe line trenches with oil engine driven pump sets including hire charges, fuel charges, wages of driver and helper etc., complete as per the technical specifications and as directed by the Engineer-in-Charge.-For Foundation
70
52
3660.3
Providing and laying of Bored cast-in-situ M25 grade R.C.C. Pile excluding Reinforcement complete as per Drawing and Technical Specifications in Section 1100 & 1700 MORTH machine, crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all charges etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) and as directed by the Engineer - In - Charge. - 600 mm dia
20
5390
107811.2
Providing & laying Sand bedding to the required height as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.- For foundation
16.03
440
7054.48
Providing plain concrete (M10) using 162 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH and as directed by the Engineer-In-Charge. - PCC
7.09
4988
35370.24
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - Footings
27.39
10943
299750.13
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - For columns below ground level
2.98
11442
34098.8
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - For columns up to unsupported height of 3.66 mtr
3.69
13856
51130.12
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - For columns up to unsupported height of 4.27 mtr
1.62
14383
23301.97
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - For columns up to unsupported height of 5.49 mtr
2.03
14294
29017.67
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - For columns up to unsupported height of 6.10 mtr
2.43
15132
36771.03
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - For Plinth Beams
1.19
13329
15862.34
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - For Beams up to unsupported height of 3.66 mtr
0.79
12196
9635.31
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - For Beams up to unsupported height of 4.88 mtr
9.02
12196
110013.33
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - For 150mm thick slabs up to unsupported height of 3.66 mtr
12.19
11114
135482.46
Providing High Yield Strength Deformed (HYSD) /Thermo Mechanically Treated (TMT) bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, including sales and other taxes on all materials etc., complete for finished item of work as directed by the Engineer-In-Charge.
6.47
94211
609545.82
Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD and as directed by the Engineer-in-Charge. - For Approach Bridge
50
3489
174453.5
Construction of 1500 KL ELSRs at Old RR Peta with stagiging of 20 mts using Minimum of M30 Grade of Concrete and Fe 500 Grade of steel for all components including dog-legged stair case,Compound wall,Staff Quartes,three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof, Two coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes, Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes, specials and valves as per approved designs and drawings etc all to complete the work as directed by the Engineer-In-Charge with the following Comopnents and Specifications.
1500000
27
40842000
Construction of 1500 KL ELSRs at Lorry Stand with stagiging of 20 mts using Minimum of M30 Grade of Concrete and Fe 500 Grade of steel for all components including dog-legged stair case,Compound wall,Staff Quartes,three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof, Two coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes, Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes, specials and valves as per approved designs and drawings etc all to complete the work as directed by the Engineer-In-Charge.
1500000
24
37458000
Construction of 1500 KL ELSRs at Urmila Subba Rao Nagar with stagiging of 20 mts using Minimum of M30 Grade of Concrete and Fe 500 Grade of steel for all components including dog-legged stair case,Compound wall,Staff Quartes,three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof, Two coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes, Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes, specials and valves as per approved designs and drawings etc all to complete the work as directed by the Engineer-In-Charge.
1500000
26
39303000
Construction of 1500 KL ELSRs at HB Colony with stagiging of 20 mts using Minimum of M30 Grade of Concrete and Fe 500 Grade of steel for all components including dog-legged stair case,Compound wall,Staff Quartes,three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof, Two coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes, Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes, specials and valves as per approved designs and drawings etc all to complete the work as directed by the Engineer-In-Charge.
1500000
27
40842000
Construction of 1000 KL ELSRs at KL Rao Park with stagiging of 20 mts using Minimum of M30 Grade of Concrete and Fe 500 Grade of steel for all components including dog-legged stair case,Compound wall,Staff Quartes,three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof, Two coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes, Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes, specials and valves as per approved designs and drawings etc all to complete the work as directed by the Engineer-In-Charge
1000000
30
30152000
Construction of 1000 KL ELSRs at Kedareswara Peta with stagiging of 20 mts using Minimum of M30 Grade of Concrete and Fe 500 Grade of steel for all components including dog-legged stair case,Compound wall,Staff Quartes,three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof, Two coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes, Pipe specials, valves of DI material, Valve chambers etc., for pipe connections including cost of pipes, specials and valves as per approved designs and drawings etc all to complete the work as directed by the Engineer-In-Charge
1000000
30
30152000
Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs,saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH and as directed by the Engineer-in-Charge. - 300 KL GLSR at sitara hill
400
1431
572776
Earthwork excavation for Structure foundations and removal of the unservicable soils and disposal of all the unservicable soils to the outside the boundary including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work etc as per 305 MORD / 304 MORTH & ApSS 308 in hard rock where blasting is prohibited - up to 3.00M as directed by Engineer-In-Charge. - 300 KL GLSR at sitara hill
3662.9
1246
4567050.24
Providing & laying Sand bedding to the required height as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.- For 300 KL GLSR at sitara hill
31.16
1096
34178.47
Providing plain concrete (M10) using 162 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH and as directed by the Engineer-In-Charge. PCC 300 KL GLSR at sitara hill
25.79
5986
154401.89
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 300 KL GLSR at sitara hill - Raft
80.44
11900
957242.44
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 300 KL GLSR at sitara hill - 150mm thick Wall
33.75
19219
648668.93
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 300 KL GLSR at sitara hill - 200mm thick Wall
19.85
18861
374409.31
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 300 KL GLSR at sitara hill - 300mm thick Wall
30
15436
463093.2
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 300 KL GLSR at sitara hill - 350mm thick Wall
19.54
15766
308085.03
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 300 KL GLSR at sitara hill - 600mm thick Wall
90
13539
1218516.3
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 300 KL GLSR at sitara hill. - For columns at under Ground Level
0.54
13251
7155.87
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 300 KL GLSR at sitara hill - Columns up to unsupported height of 4.88 mtr
1.78
15955
28401.11
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 300 KL GLSR at sitara hill -Roof Beams upto unsupported height of 4.88 mtr
5.91
14878
87931.58
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 300 KL GLSR at sitara hill - For 150mm thick Bottom Raft
20.77
8374
173933.17
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 300 KL GLSR at sitara hill - For 150mm thick Dome Slab up to unsupported height of 5.49 mtr
4.52
22316
100870.99
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 300 KL GLSR at sitara hill - For 150mm thick Slab up to unsupported height of 4.88 mtr
8.84
13405
118502.23
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 300 KL GLSR at sitara hill - For 150mm thick Slab up to unsupported height of 3.66 mtr
1.12
12070
13518.98
Supplying, fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 20 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying ,and overheads & contractors profit complete for finished item of work.as per APSS No.126 and as directed by the Engineer-In-Charge. - 300 KL GLSR at sitara hill
18.77
94652
1776636.62
Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 as directed by the Engineer -In- Charge. - 300 KL GLSR at sitara hill external walls
250.48
259
65014.59
Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. completeas per drawing and Technical Specification Clause 1701MORD and as directed by the Engineer-In-Charge. - for 300 KL GLSR at sitara hill internal walls
161.4
197
31900.71
Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work and as dircted by the Engineer-In-Caharge - For 300 KL GLSR at sitara hill Roof Slab
111.22
670
74544.09
providing and Fixing of Galvanized Iron fly proof wire mesh of not less than 20 gauge Mosquito Mesh including cost and conveyance of all materials and labour charges for painting, curing etc complete as per the directions of the departmental authorities. - For 300 KL GLSR at sitara hill - Air Vents
9
309
2781.27
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 1 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 250mm dia
1
12684
12684.41
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 1 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 300mm dia
1
16292
16292.15
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 2 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 250mm dia
10
17214
172142.4
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 2 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 300mm dia
26
22056
573481.48
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings PN 16 conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work and as directed by the Engineer-In-Charge. - Upto 500 mm dia
598
154
92103.96
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6 Mpa with by-pass arrangement with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation but excluding all taxes and as directed by the Engineer-in-Charge. - 250 mm dia
1
45600
45600.8
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6 Mpa with by-pass arrangement with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation but excluding all taxes and as directed by the Engineer-in-Charge. - 300 mm dia
1
84658
84658.23
Supply delivery of Double Flanged Slant seat Swing Check Valve (NRV) with body and Disc of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with fully encapsulated in RAL 5005 with Min. Coating thickness of 250powder coating inside and outside color Bluerubber & Fusion bonded Electro Static epoxyVulcanized EPDM microns. The EPDM rubber & Epoxy rubber & Epoxy powder should conform to W 270 standards (Drinking water application) and face to face dimensions as per EN 558-1 / DIN 3202-F6 / IS 5312 & Flange connections as per IS:1538 including transportation and as directed by the Engineer-In-Charge. - 250mm Dia
1
65284
65284.6
Lowering CI / DI pipes (all classes) and specials (fittings) with flanged ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 250mm dia
11
276
3044.14
Lowering CI / DI pipes (all classes) and specials (fittings) with flanged ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 300mm dia
27
357
9645.21
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 250mm dia
2
1046
2093.04
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 300mm dia
1
1489
1489.93
Jointing Pipes,fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 250mm dia
20
874
17487.8
Jointing Pipes,fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 300mm dia
25
923
23097
Manufacture,supply and errection of MS gates made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete and as directed by the Engineer-In-Charge.- 300 KL GLSR Gate at Sitara Hill
49.8
135
6760.35
Painting two coats with synthetic enamel paint over a base coat of red led includeding cost and conveyance of all materilas at site, labour charges, scaffolding charges etc., complete as directed by the Engineer-In-Charge. - for 300 KL GLSR Gate at Sitara Hill
2.75
242
667.76
Labour charges for conveyance of materials like Centering and Shuttering, Pipes,Valves,Specials,Ms Items,Water for Concrete Mixing and Curing etc from main road to hill area by engaging Unskilled Labour etc. complete and as directed by the Engineer-In-Charge. - for 300 KL GLSR Gate at Sitara Hill
80
914
73120.8
Supply, delivery and fixing of Water Level Indicator of float operatated type with brass pulley, bracket Nylon thread, PVC Float, enamel guage, numbered in mts. and 1/10th. of mt. with moving index 1No etc. with all extra leads and lifts. complete as directed by the Engineer-In-Charge. - for 300 KL GLSR Gate at Sitara Hill
1
9800
9800
Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD and as directed by the Engineer-In-charge - for 300 KL GLSR Gate at Sitara Hill
37.38
3655
136642.59
Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs,saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH and as directed by the Engineer-in-Charge. - 550 KL GLSR at Tennerpeta Hill
400
1431
572776
Earthwork excavation for Structure foundations and removal of the unservicable soils and disposal of all the unservicable soils to the outside the boundary including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work etc as per 305 MORD / 304 MORTH & ApSS 308 in hard rock where blasting is prohibited - up to 3.00M as directed by Engineer-In-Charge. -550 KL GLSR at Tennerpeta Hill
3713.04
1246
4629566.79
Providing & laying Sand bedding to the required height as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.- For 550 KL GLSR at Tennerpeta Hill
42.94
928
39887.4
Providing plain concrete (M10) using 162 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH and as directed by the Engineer-In-Charge. PCC 550 KL GLSR at Tennerpeta Hill
27.91
5731
159968.68
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 550 KL GLSR at Tennerpeta Hill - Raft
96.63
11657
1126476.79
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 550 KL GLSR at Tennerpeta Hill - 150mm thick Wall
33.75
18977
640486.24
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 550 KL GLSR at Tennerpeta Hill - 250mm thick Wall
31.32
17176
537970.17
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 550 KL GLSR at Tennerpeta Hill - 300mm thick Wall
30
15193
455819.7
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 550 KL GLSR at Tennerpeta Hill - 425mm thick Wall
37.12
14802
549486.99
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 550 KL GLSR at Tennerpeta Hill - 600mm thick Wall
90
13296
1196695.8
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 550 KL GLSR at Tennerpeta Hill. - For columns at under Ground Level
0.72
13009
9366.61
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 550 KL GLSR at Tennerpeta Hill - Columns up to unsupported height of 4.88 mtr
3.1
15713
48711.01
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 550 KL GLSR at Tennerpeta Hill -Roof Beams upto unsupported height of 4.88 mtr
7.29
14635
106696.37
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 550 KL GLSR at Tennerpeta Hill - For 150mm thick Bottom Raft
28.63
8131
232813.43
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 550 KL GLSR at Tennerpeta Hill - For 150mm thick Dome Slab up to unsupported height of 5.49 mtr
7.58
22074
167321.98
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 550 KL GLSR at Tennerpeta Hill - For 150mm thick Slab up to unsupported height of 4.88 mtr
10.8
13162
142158.02
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 550 KL GLSR at Tennerpeta Hill - For 150mm thick Slab up to unsupported height of 3.66 mtr
1.12
11828
13247.44
Supplying, fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 20 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying ,and overheads & contractors profit complete for finished item of work.as per APSS No.126 and as directed by the Engineer-In-Charge. - 550 KL GLSR at Tennerpeta Hill
22.62
94539
2138487.11
Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 as directed by the Engineer -In- Charge. - 550 KL GLSR at Tennerpeta Hill external walls
361.75
259
93895.83
Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. completeas per drawing and Technical Specification Clause 1701MORD and as directed by the Engineer-In-Charge. - for 550 KL GLSR at Tennerpeta Hill internal walls
236.15
197
46675.05
Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work and as dircted by the Engineer-In-Caharge - For 550 KL GLSR at Tennerpeta Hill Roof Slab
153.94
665
102439.37
providing and Fixing of Galvanized Iron fly proof wire mesh of not less than 20 gauge Mosquito Mesh including cost and conveyance of all materials and labour charges for painting, curing etc complete as per the directions of the departmental authorities. - For 550 KL GLSR at Tennerpeta Hill - Air Vents
9
309
2781.27
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 1 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 250mm dia
1
12684
12684.41
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 1 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 300mm dia
1
16292
16292.15
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 2 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 250mm dia
10
17214
172142.4
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 2 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 300mm dia
26
22056
573481.48
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings PN 16 conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work and as directed by the Engineer-In-Charge. - Upto 500 mm dia
598
154
92103.96
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6 Mpa with by-pass arrangement with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation but excluding all taxes and as directed by the Engineer-in-Charge. - 250 mm dia
1
45600
45600.8
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6 Mpa with by-pass arrangement with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation but excluding all taxes and as directed by the Engineer-in-Charge. - 300 mm dia
1
84658
84658.23
Supply delivery of Double Flanged Slant seat Swing Check Valve (NRV) with body and Disc of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with fully encapsulated in RAL 5005 with Min. Coating thickness of 250powder coating inside and outside color Bluerubber & Fusion bonded Electro Static epoxyVulcanized EPDM microns. The EPDM rubber & Epoxy rubber & Epoxy powder should conform to W 270 standards (Drinking water application) and face to face dimensions as per EN 558-1 / DIN 3202-F6 / IS 5312 & Flange connections as per IS:1538 including transportation and as directed by the Engineer-In-Charge. - 250mm Dia
1
65284
65284.6
Lowering CI / DI pipes (all classes) and specials (fittings) with flanged ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 250mm dia
11
276
3044.14
Lowering CI / DI pipes (all classes) and specials (fittings) with flanged ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 300mm dia
27
357
9645.21
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 250mm dia
2
1046
2093.04
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 300mm dia
1
1489
1489.93
Jointing Pipes,fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 250mm dia
20
874
17487.8
Jointing Pipes,fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 300mm dia
25
923
23097
Manufacture,supply and errection of MS gates made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete and as directed by the Engineer-In-Charge.- 550 KL GLSR at Tennerpeta Hill
49.8
135
6760.35
Painting two coats with synthetic enamel paint over a base coat of red led includeding cost and conveyance of all materilas at site, labour charges, scaffolding charges etc., complete as directed by the Engineer-In-Charge. - for 550 KL GLSR at Tennerpeta Hill
2.75
242
667.76
Labour charges for conveyance of materials like Centering and Shuttering, Pipes,Valves,Specials,Ms Items,Water for Concrete Mixing and Curing etc from main road to hill area by engaging Unskilled Labour etc. complete and as directed by the Engineer-In-Charge. - for 550 KL GLSR at Tennerpeta Hill
100
914
91401
Supply, delivery and fixing of Water Level Indicator of float operatated type with brass pulley, bracket Nylon thread, PVC Float, enamel guage, numbered in mts. and 1/10th. of mt. with moving index 1No etc. with all extra leads and lifts. complete as directed by the Engineer-In-Charge. - for 550 KL GLSR at Tennerpeta Hill
1
9800
9800
Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD and as directed by the Engineer-In-charge - for 550 KL GLSR at Tennerpeta Hill
43.98
3612
158895.78
Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs,saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH and as directed by the Engineer-in-Charge. - 750 KL GLSR at Srinivasa Mahal Hill
900
1431
1288746
Earthwork excavation for Structure foundations and removal of the unservicable soils and disposal of all the unservicable soils to the outside the boundary including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work etc as per 305 MORD / 304 MORTH & ApSS 308 in hard rock where blasting is prohibited - up to 3.00M as directed by Engineer-In-Charge. -750 KL GLSR at Srinivasa Mahal Hill
3740.02
1246
4663206.54
Providing & laying Sand bedding to the required height as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.- For 750 KL GLSR at Srinivasa Mahal Hill
56.61
838
47481.64
Providing plain concrete (M10) using 162 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH and as directed by the Engineer-In-Charge. PCC 750 KL GLSR at Srinivasa Mahal Hill
30.34
5593
169701.03
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 750 KL GLSR at Srinivasa Mahal Hill - Raft
107.42
11522
1237710.43
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 750 KL GLSR at Srinivasa Mahal Hill - 150mm thick Wall
33.75
18841
635914.46
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 750 KL GLSR at Srinivasa Mahal Hill - 250mm thick Wall
37.11
17041
632395.59
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 750 KL GLSR at Srinivasa Mahal Hill - 300mm thick Wall
30
15058
451755.9
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 750 KL GLSR at Srinivasa Mahal Hill - 475mm thick Wall
47.68
14306
682147.75
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 750 KL GLSR at Srinivasa Mahal Hill - 600mm thick Wall
90
13161
1184504.4
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 750 KL GLSR at Srinivasa Mahal Hill. - For columns at under Ground Level
0.72
12873
9269.07
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 750 KL GLSR at Srinivasa Mahal Hill - Columns up to unsupported height of 4.88 mtr
3.2
15577
49848.83
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 750 KL GLSR at Srinivasa Mahal Hill -Roof Beams upto unsupported height of 4.88 mtr
9.23
14500
133839.89
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 750 KL GLSR at Srinivasa Mahal Hill - For 150mm thick Bottom Raft
37.74
7996
301781.49
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 750 KL GLSR at Srinivasa Mahal Hill - For 150mm thick Dome Slab up to unsupported height of 5.49 mtr
10.16
21938
222896.89
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 750 KL GLSR at Srinivasa Mahal Hill - For 150mm thick Slab up to unsupported height of 4.88 mtr
16.52
13027
215211.16
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 750 KL GLSR at Srinivasa Mahal Hill - For 150mm thick Slab up to unsupported height of 3.66 mtr
1.12
11692
13095.72
Supplying, fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 20 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying ,and overheads & contractors profit complete for finished item of work.as per APSS No.126 and as directed by the Engineer-In-Charge. - 750 KL GLSR at Srinivasa Mahal Hill
25.69
94471
2426966.16
Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 as directed by the Engineer -In- Charge. - 750 KL GLSR at Srinivasa Mahal Hillexternal walls
449.88
259
116779.85
Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. completeas per drawing and Technical Specification Clause 1701MORD and as directed by the Engineer-In-Charge. - for 750 KL GLSR at Srinivasa Mahal Hill internal walls
288.56
197
57033.88
Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work and as dircted by the Engineer-In-Caharge - For 750 KL GLSR at Srinivasa Mahal Hill Roof Slab
201.06
662
133262.57
providing and Fixing of Galvanized Iron fly proof wire mesh of not less than 20 gauge Mosquito Mesh including cost and conveyance of all materials and labour charges for painting, curing etc complete as per the directions of the departmental authorities. - For 750 KL GLSR at Srinivasa Mahal Hill - Air Vents
9
309
2781.27
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 1 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 250mm dia
1
12684
12684.61
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 1 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 350mm dia
1
20950
20950.98
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 2 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 250mm dia
10
17214
172142.4
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 2 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 350mm dia
26
27052
703354.86
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings PN 16 conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work and as directed by the Engineer-In-Charge. - Upto 500 mm dia
711
154
109508.22
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6 Mpa with by-pass arrangement with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation but excluding all taxes and as directed by the Engineer-in-Charge. - 250 mm dia
1
45600
45600.8
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6 Mpa with by-pass arrangement with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation but excluding all taxes and as directed by the Engineer-in-Charge. - 350 mm dia
1
117774
117774.73
Supply delivery of Double Flanged Slant seat Swing Check Valve (NRV) with body and Disc of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with fully encapsulated in RAL 5005 with Min. Coating thickness of 250powder coating inside and outside color Bluerubber & Fusion bonded Electro Static epoxyVulcanized EPDM microns. The EPDM rubber & Epoxy rubber & Epoxy powder should conform to W 270 standards (Drinking water application) and face to face dimensions as per EN 558-1 / DIN 3202-F6 / IS 5312 & Flange connections as per IS:1538 including transportation and as directed by the Engineer-In-Charge. - 250mm Dia
1
65284
65284.6
Lowering CI / DI pipes (all classes) and specials (fittings) with flanged ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 250mm dia
11
276
3044.14
Lowering CI / DI pipes (all classes) and specials (fittings) with flanged ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 350mm dia
27
450
12159.45
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 250mm dia
2
1046
2093.04
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 350mm dia
1
2516
2516.21
Jointing Pipes,fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 250mm dia
20
874
17487.8
Jointing Pipes,fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 350mm dia
25
1305
32632.25
Manufacture,supply and errection of MS gates made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete and as directed by the Engineer-In-Charge.- 750 KL GLSR at Srinivasa Mahal Hill
49.8
135
6760.35
Painting two coats with synthetic enamel paint over a base coat of red led includeding cost and conveyance of all materilas at site, labour charges, scaffolding charges etc., complete as directed by the Engineer-In-Charge. - for 750 KL GLSR at Srinivasa Mahal Hill
2.75
242
667.76
Labour charges for conveyance of materials like Centering and Shuttering, Pipes,Valves,Specials,Ms Items,Water for Concrete Mixing and Curing etc from main road to hill area by engaging Unskilled Labour etc. complete and as directed by the Engineer-In-Charge. - for 750 KL GLSR at Srinivasa Mahal Hill
120
914
109681.2
Supply, delivery and fixing of Water Level Indicator of float operatated type with brass pulley, bracket Nylon thread, PVC Float, enamel guage, numbered in mts. and 1/10th. of mt. with moving index 1No etc. with all extra leads and lifts. complete as directed by the Engineer-In-Charge. - for 750 KL GLSR at Srinivasa Mahal Hill
1
9800
9800
Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD and as directed by the Engineer-In-charge - for 750 KL GLSR at Srinivasa Mahal Hill
50.27
3589
180439.64
Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs,saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH and as directed by the Engineer-in-Charge. - 1200 KL GLSR at Nizam Gate Hill
1225
1431
1754126.5
Earthwork excavation for Structure foundations and removal of the unservicable soils and disposal of all the unservicable soils to the outside the boundary including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work etc as per 305 MORD / 304 MORTH & ApSS 308 in hard rock where blasting is prohibited - up to 3.00M as directed by Engineer-In-Charge. -1200 KL GLSR at Nizam Gate Hill
5256.82
1246
6554413.45
Providing & laying Sand bedding to the required height as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.- For 1200 KL GLSR at Nizam Gate Hill
72.99
1036
75673.11
Providing plain concrete (M10) using 162 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH and as directed by the Engineer-In-Charge. PCC 1200 KL GLSR at Nizam Gate Hill
38.38
5894
226238.59
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 1200 KL GLSR at Nizam Gate Hill - Raft
184.25
11809
2175948.28
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 1200 KL GLSR at Nizam Gate Hill - 150mm thick Wall
40.5
19129
774745.15
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 1200 KL GLSR at Nizam Gate Hill - 300mm thick Wall (Curved)
105.17
16369
1721545.61
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 1200 KL GLSR at Nizam Gate Hill - 300mm thick Wall (Plain)
36
15346
552460.68
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 1200 KL GLSR at Nizam Gate Hill - 575mm thick Wall
173.66
14067
2443001.99
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - 1200 KL GLSR at Nizam Gate Hill - 600mm thick Wall
108
13448
1452466.08
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 1200 KL GLSR at Nizam Gate Hill. - For columns at under Ground Level
1.6
13161
21058.1
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 1200 KL GLSR at Nizam Gate Hill - Columns up to unsupported height of 4.88 mtr
8.72
15865
138345.94
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 1200 KL GLSR at Nizam Gate Hill -Roof Beams upto unsupported height of 4.88 mtr
11.62
14788
171838.07
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 1200 KL GLSR at Nizam Gate Hill - For 150mm thick Bottom Raft
48.66
8283
403096.03
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 1200 KL GLSR at Nizam Gate Hill - For 150mm thick Dome Slab up to unsupported height of 5.49 mtr
16.62
22226
369400.61
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 1200 KL GLSR at Nizam Gate Hill - For 150mm thick Slab up to unsupported height of 4.88 mtr
20.64
13314
274819.74
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - 1200 KL GLSR at Nizam Gate Hill - For 150mm thick Slab up to unsupported height of 3.66 mtr
1.12
11980
13417.84
Supplying, fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 20 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying ,and overheads & contractors profit complete for finished item of work.as per APSS No.126 and as directed by the Engineer-In-Charge. - 1200 KL GLSR at Nizam Gate Hill
36.75
94607
3476821.22
Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 as directed by the Engineer -In- Charge. - 1200 KL GLSR at Nizam Gate Hill external walls
603.22
259
156571.78
Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. completeas per drawing and Technical Specification Clause 1701MORD and as directed by the Engineer-In-Charge. - for 1200 KL GLSR at Nizam Gate Hill internal walls
427.75
197
84544.79
Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work and as dircted by the Engineer-In-Caharge - For 1200 KL GLSR at Nizam Gate Hill Roof Slab
260.16
668
173911.76
providing and Fixing of Galvanized Iron fly proof wire mesh of not less than 20 gauge Mosquito Mesh including cost and conveyance of all materials and labour charges for painting, curing etc complete as per the directions of the departmental authorities. - For 1200 KL GLSR at Nizam Gate Hill - Air Vents
9
309
2781.27
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 1 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 250mm dia
1
12684
12684.41
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 1 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 450mm dia
1
33323
33323.95
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 2 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 250mm dia
10
17214
172142.4
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 2 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 450mm dia
26
43958
1142916.32
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings PN 16 conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work and as directed by the Engineer-In-Charge. - Upto 500 mm dia
982
154
151247.64
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6 Mpa with by-pass arrangement with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation but excluding all taxes and as directed by the Engineer-in-Charge. - 250 mm dia
1
45600
45600.8
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6 Mpa with by-pass arrangement with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation but excluding all taxes and as directed by the Engineer-in-Charge. - 450 mm dia
1
247359
247359.74
Supply delivery of Double Flanged Slant seat Swing Check Valve (NRV) with body and Disc of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with fully encapsulated in RAL 5005 with Min. Coating thickness of 250powder coating inside and outside color Bluerubber & Fusion bonded Electro Static epoxyVulcanized EPDM microns. The EPDM rubber & Epoxy rubber & Epoxy powder should conform to W 270 standards (Drinking water application) and face to face dimensions as per EN 558-1 / DIN 3202-F6 / IS 5312 & Flange connections as per IS:1538 including transportation and as directed by the Engineer-In-Charge. - 250mm Dia
1
65284
65284.6
Lowering CI / DI pipes (all classes) and specials (fittings) with flanged ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 250mm dia
11
276
3044.14
Lowering CI / DI pipes (all classes) and specials (fittings) with flanged ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 450mm dia
27
661
17850.24
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 250mm dia
2
1046
2093.04
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 450mm dia
1
4039
4039.92
Jointing Pipes,fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 250mm dia
20
874
17487.8
Jointing Pipes,fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 450mm dia
25
2342
58552
Manufacture,supply and errection of MS gates made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete and as directed by the Engineer-In-Charge.- 1200 KL GLSR at Nizam Gate Hill
49.8
135
6760.35
Painting two coats with synthetic enamel paint over a base coat of red led includeding cost and conveyance of all materilas at site, labour charges, scaffolding charges etc., complete as directed by the Engineer-In-Charge. - for 1200 KL GLSR at Nizam Gate Hill
2.75
242
667.76
Labour charges for conveyance of materials like Centering and Shuttering, Pipes,Valves,Specials,Ms Items,Water for Concrete Mixing and Curing etc from main road to hill area by engaging Unskilled Labour etc. complete and as directed by the Engineer-In-Charge. - for 1200 KL GLSR at Nizam Gate Hill
165
914
150811.65
Supply, delivery and fixing of Water Level Indicator of float operatated type with brass pulley, bracket Nylon thread, PVC Float, enamel guage, numbered in mts. and 1/10th. of mt. with moving index 1No etc. with all extra leads and lifts. complete as directed by the Engineer-In-Charge. - for 1200 KL GLSR at Nizam Gate Hill
1
9800
9800
Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD and as directed by the Engineer-In-charge - for 1200 KL GLSR at Nizam Gate Hill
56.23
3639
204667.64
Cutting of open CC Road Surface including stacking of excavated material for pipe line trench with concrete saw cutting machine s per the standard specifications and as directed by the Engineer-In-Charge. - For Booster Houses
2.91
5379
15654.64
Earthwork excavation in all type of soils by mannual means for pipe line trenches and structures as per drawing and technical specification, setting out, removal of stumps and other deleterious matter, dressing sides of bottom, back filling with the excavated earth to the extent required and disposal of surplus earth with all lifts and lead upto 50m etc., complete including charges for finished item of work as per MoRT&H specification 301 (5th Revision) or as per latest revisions and specifications and as directed by the Engineer-in-Charge. In all types of soil including ordinary rock by mannual means where deph upto 3m
47.7
332
15869.79
Providing & laying Sand bedding to the required height as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge.- For Booster Houses
8.28
440
3643.86
Providing plain concrete (M10) using 162 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH and as directed by the Engineer-In-Charge. PCC Booster Houses
3.13
4988
15614.79
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 380kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge.. - Booster Houses - Raft
9.34
10847
101319.29
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 380kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - Booster Houses. - For columns at under Ground Level
1.49
11346
16906.52
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 380kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - Booster Houses - Columns up to unsupported height of 3.66 mtr
4.48
13760
61647.08
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - Booster Houses - Plinth Beams
5.22
13233
69080.49
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 380kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - Booster Houses -Roof Beams upto unsupported height of 3.66 mtr
10.04
12100
121491.13
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 380kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - Booster Houses - For 150mm thick Grade Slab
6.75
7322
49423.91
Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 380kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) as directed by the Engineer -In- Charge. - Booster Houses - For 100mm thick Grade Slab upto unsupported height 3.66 mtr
8.37
12866
107692.35
Supplying, fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 20 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying ,and overheads & contractors profit complete for finished item of work.as per APSS No.126 and as directed by the Engineer-In-Charge. - Booster Houses
4.46
94211
420181.51
Brick Masonry work in CM(1:6) prop (Cement : Sand) in superstructure with traditional size 19 x 9 x 9 cms from approved source having minimum crushing strength of 40 Kg/Sqcm and water absorption not exceeding 20% by weight including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work (APSS No. 501 & 504) as directed by the Engineer-in-Charge. - forBooster Houses
19.12
8770
167686.42
Providing Half Brick Masonry work in CM(1:4) prop (Cement : Sand) in superstructure with traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504) and as dircted by the Engineer-In-Caharge - ForBooster Houses
40.56
1022
41458.4
Plastering 20mm thick in two coats for out side using screened sand with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) and as dircted by the Engineer-In-Caharge - For Booster Houses External Plastering
236.4
615
145539.66
Plastering 12mm thick in Single coat for In side using screened sand of Cement mortor Mix 1:4 with Smooth finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work - for Booster Houses Internal Plastering
106.16
196
20816.91
Ceiling Plastering 12mm thick single coat in CM(1:4) for using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) and as dircted by the Engineer-In-Caharge - ForBooster Houses Ceiling Plasering.
90.58
204
18551.69
Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 - for Booster Houses external walls
205.8
259
53417.45
Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 and as dircted by the Engineer-In-Caharge - for Booster Houses internal walls
196.74
175
34575.09
Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work and as dircted by the Engineer-In-Caharge - For Pump House Roof Slab
39.36
651
25646.58
Supply and fixing of Rolling shutter made of 80 x 1.25 mmmachine rolled CRCA laths, inter locked together through their entire length and jointed together at the ends by end-locks , mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipewith brackets, plates, guide channels, stoppers, bottom locking plates, and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer , locks, ball bearings , all accessories etc complete for finished item of work as per special spn:1108 and as dircted by the Engineer-In-Caharge - For Booster Houses
21.6
5091
109967.54
Supply and fixing of pre-painted steel openable windows base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 , finish painted with a polyester paint of 12-16 micronsthick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm with 5 mm thick plain float glass fitted with Ethyl propylene Diamine monomer Gasket (EPDM) and handle made of high grade aluminium powder coated with frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work . Centre fixed both side openable shutter window 5’0”x4’0” (1524mm x1219.2mm). Outer frame section size of 48x50mm. Shutter frame section size of 48 x 25 mm. Mullion section size of 48x50mm. Fixed beading section size of 12x12mm and as dircted by the Engineer-In-Caharge. - For Booster Houses
14.4
7005
100879.2
Providing and fixing of top hung Ventilators made of pre-painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns thick and section for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm,section for shutter of 52 x 25 mm x 0.6mm thick, outer frame and mullions to have rebate for glazed shutter with a provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in wall by means of self expandingconcrete/masonry screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc.,complete for finished item of work and as dircted by the Engineer-In-Caharge. - For Booster Houses
2.88
7600
21890.42
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 1 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 100mm dia
1
4556
4556.9
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 1 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 150mm dia
3
7235
21705.12
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 1 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 250mm dia
4
12684
50737.64
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 2 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 100mm dia
4
5885
23540.24
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 2 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 150mm dia
12
9709
116514.84
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 2 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as dircted by the Engineer-In-Caharge. - 250mm dia
16
17214
275427.84
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings PN 16 conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work and as directed by the Engineer-In-Charge. - Upto 500 mm dia
2152
154
331451.04
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6 Mpa with by-pass arrangement with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation but excluding all taxes and as directed by the Engineer-in-Charge. - 250 mm dia
4
45600
182403.2
Supply delivery of Double Flanged Slant seat Swing Check Valve (NRV) with body and Disc of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with fully encapsulated in RAL 5005 with Min. Coating thickness of 250powder coating inside and outside color Bluerubber & Fusion bonded Electro Static epoxyVulcanized EPDM microns. The EPDM rubber & Epoxy rubber & Epoxy powder should conform to W 270 standards (Drinking water application) and face to face dimensions as per EN 558-1 / DIN 3202-F6 / IS 5312 & Flange connections as per IS:1538 including transportation and as directed by the Engineer-In-Charge. - 100mm Dia
1
27557
27557.32
Supply delivery of Double Flanged Slant seat Swing Check Valve (NRV) with body and Disc of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with fully encapsulated in RAL 5005 with Min. Coating thickness of 250powder coating inside and outside color Bluerubber & Fusion bonded Electro Static epoxyVulcanized EPDM microns. The EPDM rubber & Epoxy rubber & Epoxy powder should conform to W 270 standards (Drinking water application) and face to face dimensions as per EN 558-1 / DIN 3202-F6 / IS 5312 & Flange connections as per IS:1538 including transportation and as directed by the Engineer-In-Charge. - 150mm Dia
3
40679
122039.55
Lowering CI / DI pipes (all classes) and specials (fittings) with flanged ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 100mm dia
5
86
434.85
Lowering CI / DI pipes (all classes) and specials (fittings) with flanged ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 150mm dia
5
142
710.3
Lowering CI / DI pipes (all classes) and specials (fittings) with flanged ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 250mm dia
5
276
1383.7
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 100mm dia
1
263
263.36
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 150mm dia
3
446
1339.14
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 250mm dia
4
1046
4186.08
Jointing Pipes,fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 100mm dia
10
383
3831.9
Jointing Pipes,fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 150mm dia
48
577
27727.2
Jointing Pipes,fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 250mm dia
58
874
50714.62
Manufacture,supply,delivery of MS grill gates for windows as ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete and as directed by the Engineer-In-Charge.- for Windows
398.4
135
54082.8
Painting two coats with synthetic enamel paint over a base coat of red led includeding cost and conveyance of all materilas at site, labour charges, scaffolding charges etc., complete as directed by the Engineer-In-Charge. - for MS items
88.32
242
21445.86
Supply and Transportation of 315 KVA ISI marked copper wound Transformers (Indoor type) 11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type, Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side, ON load Tap changer (OLTC)+10% to -10%, with RTCC etc., with initial filling of oil as per IS 335-1993 complete and as per the following continuous rating. Make:Schneider/Kirloskar/Voltamp/ Esennar/ Toshiba/ KPEL/ Powertech /SSE/ THOTA / Vajra - 315KVA
1
1228831
1228831.44
Supply, Transportation, Installation and Commissioning of 11 KV, 630A, 25 KA Outdoor type Load Break Switch as detailed below with suitable CC foundation and 2 Nos GI pipe earthing with brick masonry chambers etc., complete for finished item of work of Makes: As per list of recommended brands including a) Load break switch: 11KV,630A, 25 KA with fuse trip, earth switch, manually operated spring charged mechanism with 2 no + 2 NC. b) HT HRC fuse upto 63A - 3 nos. c) Bus bar connection. d) Indication lamps. e) Manual trip Push button. -11 KV/630A/25KA Load Break Switch
1
161819
161819.57
Providing earth electrode of low carbon steel rod, UL listed of 17.2 mm dia, 3 Mtr long, coated with copper of 254 microns thickness, CPRI tested for short time current withstand test of 25 kA, coating thickness, environmental test (Salt Mist Test), Bend test, Tensile strength, Yield / tensile ratio, Electrical Resistivity test, complete with clamps and 2 bags of (Earth plus ULTRA /TIRUMALA) high grade earthing compound IEC 62561-7 complaint Eco-friendly, Maintenance free, anti-corrosive, lead-free, super conductive, mineral based high-grade earthing compound, to enhance soil conductivity. With resistance 0.20 ohms-meter, should be leach proof & Sulphur free complete with earth inspection chamber of dimensions: width: 320 mm x 320 mm, Height : 192 mm, weight : 30 Kgs, Load bearing capacity : 5000 Kgs - 17.2mm dia
14
13060
182840.56
Supply and laying of Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including, riveting, soldering, saddles, making connection etc as required and as directed by the Engineer-In-Charge. - 50 mm x 6mm Copper Flat (2.680Kgs/1Mtr)
50
2794
139746.5
Supply and laying of Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including, riveting, soldering, saddles, making connection etc as required and as directed by the Engineer-In-Charge. - 32 mm x 6mm Copper Flat (1.9Kgs/1Mtr)
100
1980
198031
Supply and Transportation of 3C X 120 Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI /Polycab/Gloster/RR Kabel/RPG - 3C X 120 Sq mm
70
1466
102673.9
Supply and transportation of 300Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Finolex / V-Guard - 300Sq mm X 3.5 core
231
2193
506793.21
Supply and Making heat shrinkable type outdoor/straight through terminations/ joint kit of approved make suitable for XLPE insulated 11 KV cable, with required components, preparation of cable ends, testing etc. 3 core 120/150/185 Sq mm Makes: Raychem /M seal/ Denson/ Multy/ Transeal- Hongshang - 3 core 120/150/185 Sq mm
4
16600
66401.16
Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade 3.5 core x 300 sq.mm
4
2474
9898.12
Supply and making end termination with heavy Aluminum lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc., of size: 300 Sq mm
48
137
6598.56
Supply and transportation of 150Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I of Makes: Finolex / V-Guard and as directed by the Engineer-In-Charge.
200
891
178376
Supply and making end termination with heavy Aluminum lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc., and as directed by the Engineer-In-Charge. - size: 150 Sq mm
48
62
2999.52
Earth work excavation of trench in hard ground soil laying of U.G cables upto 70 sqmm to 400 Sq,mm on sand cushion covering the cable with bricks and back filling of trench duly providing route indication embedded in C.C including cost and conveyance of materials and labour charges etc., complete and as directed by the Engineer-In-Charge. - HT & LT Cables
250
164
41000
Run of U.G cable on wall in existing pipe with necessary fixing arrangements such as saddles / clamps, wooden separators etc. using 10 SWG G.I wire for run & laying including all labour charges etc., complete as per the directions of departmental authorities. - HT & LT Cables
195
59
11534.25
Supply, delivery and commissioning of suitable Size panel board with 16SWG CRCA Sheet and two coats of primary and two caots of powder coated painting and necessary wiring, incoming 650A MCCB-2No's ,160A MCCB's- 3No's and power capacitors , for Each Pump set , busbar panel board for above pump set with 120 HP VFD (Variable Frequency Drive) starter of make ( L & T / C&G / danfoss) suitable rating controlling accessories with necessary connection of as per I.E Rules as directed by department authorities. - For Intake well Cum Pump House
1
2928000
2928000
Supply, delivery, erection and commissioning of reputed make Energy Efficiency as per BEE VT Pumpset (2W+1S) Capable of Discharging 304 LPS with a total head of 26 m , directly coupled by pin and rubber bush type couplings to a squirrel cage induction motor having a duty of suitable capacity, with standard CI construction with bronze impeller of reputed/standard make alongwith all pressure guages and vaccum guages siphon and cock including cost of base frame including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST and as directed by the Engineer-In-Charge.- 18240 LPM. 26 Mtrs. Head , 130 HP - Intake well Cum Pump House
3
3414000
10242000
Supply, delivery, erection and commissioning of reputed make Energy Efficiency as per BEE Horizontal Split case Pumpset Capable of Discharging 3240 lpm @ Total Head 25mts, directly coupled by pin and rubber bush type couplings to a squirrel cage induction motor having a duty of suitable capacity, with standard CI construction with bronze impeller of reputed/standard make alongwith all pressure guages and vaccum guages siphon and cock including cost of base frame including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST and as directed by the Engineer-In-Charge. - 3240 LPM. 25 Mtrs. Head , 25 HP -Urmila Subba Rao Nagar Booster House
2
447950
895900
Supply, delivery, erection and commissioning of reputed make Energy Efficiency as per BEE Horizontal Split case Pumpset Capable of Discharging 1680 lpm @ Total Head 38mts, directly coupled by pin and rubber bush type couplings to a squirrel cage induction motor having a duty of suitable capacity, with standard CI construction with bronze impeller of reputed/standard make alongwith all pressure guages and vaccum guages siphon and cock including cost of base frame including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST and as directed by the Engineer-In-Charge. - 1680 LPM. 38 Mtrs. Head , 20 HP -Srinivasa Mahal Booster House
2
362160
724320
Supply, delivery, erection and commissioning of reputed make Energy Efficiency as per BEE Horizontal Split case Pumpset Capable of Discharging 2580 lpm @ Total Head 63mts, directly coupled by pin and rubber bush type couplings to a squirrel cage induction motor having a duty of suitable capacity, with standard CI construction with bronze impeller of reputed/standard make alongwith all pressure guages and vaccum guages siphon and cock including cost of base frame including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST and as directed by the Engineer-In-Charge. - 2580 LPM. 63 Mtrs. Head , 50 HP -Nizam Gate Booster House
2
876900
1753800
Supply, delivery, erection and commissioning of reputed make Energy Efficiency as per BEE Horizontal Split case Pumpset Capable of Discharging 2160 lpm @ Total Head 70mts, directly coupled by pin and rubber bush type couplings to a squirrel cage induction motor having a duty of suitable capacity, with standard CI construction with bronze impeller of reputed/standard make alongwith all pressure guages and vaccum guages siphon and cock including cost of base frame including cost and conveyance of all materials, errection and commissioning charges and dismantling the existing pumpsets carefully if any and all taxes, duties, labour and transportation charges to site and all other incidental and operational charges etc; complete including all taxes but excluding GST and as directed by the Engineer-In-Charge. - 2160 LPM. 70 Mtrs. Head , 45 HP -Nizam Gate Booster House
2
791110
1582220
Providing and Commissioning of Electric Over head travelling (EOT) Crane of 5 ton capacity including Chain pully block with tripple gear arrangment, lifting hook, load chain, hand chain & locking device with necessary mounting girder / structure, spur gear travelling trolly & all accessories and as directed by the Engineer-In-Charge. - 5 Ton
1
325000
325000
Supply and fixing of ABC stored pressure squeeze grip type fire extinguishers, 10 kg capacity, IS:15683 : 2006, filled with ABC Mono Ammonium Phosphate base powder-90 complete with discharge hose and wall mounting bracket, 2mm Mild Steel, EPDM Rubbers, Pressure Guage, which work effectively on all class of fires (A, B, C & Electrical fires) with 5 years warranty Including transportation, all taxes and all labour charges etc complete and as directed by the Engineer-In-charge. - 10 Kg capacity
10
13221
132213.8
Supply and fixing of ISI mark (IS:15683) Mono ammonium phosphate powder 90 (MAP) 2 Kg Fire extinguisher, stored pressure type, pressure gauge, gross wt. 3.6 kg, empty wt.1.6 kg, Discharge time minimum 8 sec, controllable discharge mechanism, range min. 2 mts applicable on classes A,B, C & electrically started fire, A rating -2 A, B rating -21 B, can construction: Deep drawn and Co2 mig welding, Valve construction: Forging & Machining, internal coating of can: Epoxy powder coating, External coating of Can:Epoxy polyster powder coating, sheet metal thickness:1.60mm, Helium leak detection tested with 5 years warranty Including transportation, all taxes and all labour charges etc complete and as directed by the Engineer-In-charge. - 2 kg Capacity
10
6441
64419.7
Supply and fixing of 4Nos of 9 Ltrs capacity round bottom sand buckets along with bucket sand, Fire buckets with round bottom type enamel painted, white inside & red out side and letter FIRE inblack out side & Handle with mounting bracket and as directed by the Engineer-In-charge. - 9 ltr Capacity
10
1724
17246.8
Supply and fixing of ISI 25mm outer dia heavy (2.20mm thickness) grade with IS:9537 part 3 regid PVC pipe and as directed by the Engineer-In-charge. - 25mm Dia
80
52
4180.8
Supply of 19/20mm FRPP corrugated Flexible conduit pipe and as directed by the Engineer-In-charge.
40
19
772.4
Supply of PVC Junction Boxes Deep size 25mm. and as directed by the Engineer-In-charge.
50
31
1590.5
Supply of 25mm PVC Flexible Couplings and as directed by the Engineer-In-charge.
50
23
1193
Supply of 25mm dia 1.5mm thick PVC Bends.and as directed by the Engineer-In-charge.
60
13
817.8
Supply of 6" x 6" Metal Box 150mmx150x60mm and as directed by the Engineer-In-charge.
8
96
772.56
Supply of T.W.Deep Box of Size 6" x 6" and as directed by the Engineer-In-charge.
4
29
118.16
Supply of 4" x 7" Metal Box 175mmx100x60mm and as directed by the Engineer-In-charge.
4
82
331.76
Supply of T.W.Deep Box of Size 4" x 7" and as directed by the Engineer-In-charge.
4
27
109.08
Supply of No.8 Screws of 25mmand as directed by the Engineer-In-charge.
2
110
220.42
Supply of 36/0.3mm (2.5 Sqmm) FRLS / HFFR / ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for Copper cable and as directed by the Engineer-In-Charge.
4
3754
15019.92
Supply of 6A 1 Way flush type Swich.and as directed by the Engineer-In-charge.
48
20
981.6
Supply of 6A 3/2 pin flush type Socket with shutter.and as directed by the Engineer-In-charge.
8
30
245.44
Supply of 6-32A 10KA DP MCB, C/D Curve ISI and as directed by the Engineer-In-charge.
4
786
3144.88
Supply of 6-32A 10KA SP MCB, C/D Curve ISI Mark. and as directed by the Engineer-In-charge.
12
259
3108.48
Supply of 8 Way SPN DB with IP 30 Protection suitable for 8 Nos S.P out goings and for 1 No Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. Makes : As per list of recommended brands as category I.and as directed by the Engineer-In-charge. - Distribution Board
4
1362
5448.96
Supply, Transportation and fixing of ........ LED Down lighter, suitable for Recessed / Surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver, operating voltage range of 150 to 265 Volts AC, P.F 0.9, Surge protection: 2KV, THD10% with high power LED's having efficacy of 120 lumins / watt, CCT: 3000K - 5700K, minimum CRI 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete and as directed by the Engineer-In-charge. - 9W
12
762
9148.32
Supply of 48" (1200mm) Sweep ISI mark Ceiling Fan as per IS 374 - 1979 and, with double ball bearings, power input not more than 50W , air delivery more than 200 cubic meter/min but without Regulator and as directed by the Engineer-In-charge. - 48"
4
3916
15665.24
Supply of 9" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. and as directed by the Engineer-In-charge. - 9"
4
1763
7053.2
Cutting of open B.T. Road surface (as well as asphalt concrete upto 75mm thick) including water bound macadam including stacking of excavated materials for laying of pipe lines as per the standard specifications and as directed by the Engineer-In-Charge. - For pipe line trenches
5111.7
166
848848.9
Cutting of open CC Road Surface including stacking of excavated material for pipe line trench with concrete saw cutting machine s per the standard specifications and as directed by the Engineer-In-Charge. - For pipe line trenches
302.37
5379
1626629.65
Earthwork excavation in all type of soils by mechanical means for pipe line trenches and structures as per drawing and technical specification, setting out, removal of stumps and other deleterious matter, dressing sides of bottom, back filling with the excavated earth to the extent required and disposal of surplus earth with all lifts and lead upto 1 KM etc., complete including charges for finished item of work as per MoRT&H specification 301 (5th Revision) or as per latest revisions and specifications and as directed by the Engineer-in-Charge. In all types of soil including ordinary rock by mechanical means upto 3m depth
6799.71
133
909597.21
Earthwork excavation in all type of soils by mannual means for pipe line trenches and structures as per drawing and technical specification, setting out, removal of stumps and other deleterious matter, dressing sides of bottom, back filling with the excavated earth to the extent required and disposal of surplus earth with all lifts and lead upto 50m etc., complete including charges for finished item of work as per MoRT&H specification 301 (5th Revision) or as per latest revisions and specifications and as directed by the Engineer-in-Charge. In all types of soil including ordinary rock by mannual means where deph upto 3m.
2914.18
332
969547.69
Bailing out water from the pipe line trenches with oil engine driven pump sets including hire charges, fuel charges, wages of driver and helper etc., complete as per the technical specifications and as directed by the Engineer-in-Charge.- For pipe line trenches
131
52
6849.99
Providing barricading arrangement with Bamboos for water supply and sewer pipe line trenches removal after the backfillng of trenches including the hire charges of barricading materials as per the schedule given by the departmental authorities complete for finished item of work and as directed by the Engineer-In-Charge. - For pipe line trenches
6100
236
1443565
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron K9 Class Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m, 5.0m, 5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation to site, unloading & stacking and as directed by the Engineer - in - charge. - 250mm dia
1630
4270
6961615.9
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron K9 Class Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m, 5.0m, 5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation to site, unloading & stacking and as directed by the Engineer - in - charge. - 300mm dia
1335
5425
7242588.6
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron K9 Class Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m, 5.0m, 5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation to site, unloading & stacking and as directed by the Engineer - in - charge. - 350mm dia
940
6872
6460037.2
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron K9 Class Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m, 5.0m, 5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation to site, unloading & stacking and as directed by the Engineer - in - charge. - 450mm dia
80
9863
789064.8
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron K9 Class Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m, 5.0m, 5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation to site, unloading & stacking and as directed by the Engineer - in - charge. - 800mm dia
395
25040
9891044.9
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron K9 Class Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m, 5.0m, 5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation to site, unloading & stacking and as directed by the Engineer - in - charge. - 900mm dia
1720
30074
51727486.4
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 1 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as directed by the Engineer-In-Charge. - 250mm dia
880
19052
16766226.4
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings PN 16 conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work and as directed by the Engineer-In-Charge. - Upto 500 mm dia
8760
154
1349215.2
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings PN 16 conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work and as directed by the Engineer-In-Charge. - Above 500 mm dia
23479
169
3987203.78
Manufacture, supply and delivery of S.B.R. Quality Rubber as per BIS:12820/89 with confirming to BIS:5382/85, Rubber Gaskets suitable for CI, DI, S/S pipes including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking and as directed by the Engineer - in - charge for 250mm Dia
260
156
40765.4
Manufacture, supply and delivery of S.B.R. Quality Rubber as per BIS:12820/89 with confirming to BIS:5382/85, Rubber Gaskets suitable for CI, DI, S/S pipes including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking and as directed by the Engineer - in - charge for 300mm Dia
269
238
64180.71
Manufacture, supply and delivery of S.B.R. Quality Rubber as per BIS:12820/89 with confirming to BIS:5382/85, Rubber Gaskets suitable for CI, DI, S/S pipes including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking and as directed by the Engineer - in - charge for 350mm Dia
170
302
51377.4
Manufacture, supply and delivery of S.B.R. Quality Rubber as per BIS:12820/89 with confirming to BIS:5382/85, Rubber Gaskets suitable for CI, DI, S/S pipes including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking and as directed by the Engineer - in - charge for 400mm Dia
6
334
2004.18
Manufacture, supply and delivery of S.B.R. Quality Rubber as per BIS:12820/89 with confirming to BIS:5382/85, Rubber Gaskets suitable for CI, DI, S/S pipes including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking and as directed by the Engineer - in - charge for 450mm Dia
26
390
10161.84
Manufacture, supply and delivery of S.B.R. Quality Rubber as per BIS:12820/89 with confirming to BIS:5382/85, Rubber Gaskets suitable for CI, DI, S/S pipes including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking and as directed by the Engineer - in - charge for 500mm Dia
9
543
4887.72
Manufacture, supply and delivery of S.B.R. Quality Rubber as per BIS:12820/89 with confirming to BIS:5382/85, Rubber Gaskets suitable for CI, DI, S/S pipes including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking and as directed by the Engineer - in - charge for 700mm Dia
2
912
1824.66
Manufacture, supply and delivery of S.B.R. Quality Rubber as per BIS:12820/89 with confirming to BIS:5382/85, Rubber Gaskets suitable for CI, DI, S/S pipes including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking and as directed by the Engineer - in - charge for 800mm Dia
78
1289
100583.34
Manufacture, supply and delivery of S.B.R. Quality Rubber as per BIS:12820/89 with confirming to BIS:5382/85, Rubber Gaskets suitable for CI, DI, S/S pipes including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking and as directed by the Engineer - in - charge for 900mm Dia
326
1556
507428.78
Lowering CI / DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 250mm Dia
1100
212
233816
Lowering CI / DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 300mm dia
1335
274
367018.2
Lowering CI / DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 350mm Dia
940
344
324130.8
Lowering CI / DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 450mm dia
80
509
40726.4
Lowering CI / DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 800mm dia
395
1279
505374.85
Lowering CI / DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 900mm dia
1720
1561
2685745.6
Lowering CI / DI pipes (all classes) and specials (fittings) with flanged ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 250mm dia
880
276
243531.2
Labour charges for conveyance of materials like Centering and Shuttering, Pipes,Valves,Specials,Ms Items,Water for Concrete Mixing and Curing etc from main road to hill area by engaging Unskilled Labour etc. complete and as directed by the Engineer-In-Charge.
99
914
90486.99
Jointing CI / DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete.(Reference to specifications BIS No.3114 /1994 /12288 /1997). and as directed by Engineer-in-charge for 250mm dia
349
263
92017.34
Jointing CI / DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete.(Reference to specifications BIS No.3114 / 1994 / 12288 /1997). and as directed by Engineer-in-charge for 300mm dia
269
299
80659.65
Jointing CI / DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete.(Reference to specifications BIS No.3114 /1994 /12288 /1997). and as directed by Engineer-in-charge for 350mm dia
170
355
60472.4
Jointing CI / DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete.(Reference to specifications BIS No.3114 / 1994 / 12288 /1997). and as directed by Engineer-in-charge for 400mm dia
6
384
2304
Jointing CI / DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete.(Reference to specifications BIS No.3114 / 1994 / 12288 /1997). and as directed by Engineer-in-charge for 450mm dia
26
440
11454.82
Jointing CI / DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete.(Reference to specifications BIS No.3114 / 1994 / 12288 /1997). and as directed by Engineer-in-charge for 500mm dia
9
478
4302.45
Jointing CI / DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete.(Reference to specifications BIS No.3114 / 1994 / 12288 /1997). and as directed by Engineer-in-charge for 700mm dia
2
627
1255.92
Jointing CI / DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete.(Reference to specifications BIS No.3114 / 1994 / 12288 / 1997). and as directed by Engineer-in-charge for 800mm dia
78
1125
87823.32
Jointing CI / DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete.(Reference to specifications BIS No.3114 / 1994 / 12288 / 1997). and as directed by Engineer-in-charge for 900mm dia
326
1297
422828.52
Jointing Pipes,fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 250mm dia
294
874
257070.66
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 400kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as directed by the Engineer -In- Charge. - Thrust Blocks
185.64
6531
1212570.78
Providing High Yield Strength Deformed (HYSD) /Thermo Mechanically Treated (TMT) bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, including sales and other taxes on all materials etc., complete for finished item of work as directed by the Engineer-In-Charge. - For Thrust Blocks
0.94
94211
88746.86
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6 Mpa with by-pass arrangement with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation but excluding all taxes and as directed by the Engineer-in-Charge. - 80mm dia
13
11836
153874.76
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6 Mpa with by-pass arrangement with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation but excluding all taxes and as directed by the Engineer-in-Charge. - 100mm dia
1
15457
15457.15
Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6 Mpa with by-pass arrangement with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation but excluding all taxes and as directed by the Engineer-in-Charge. - 150mm dia
4
24337
97350.12
Manufacture, supply and delivery of Tamper proof DI Flanged Single Chamber Air release Valves with Body and cover made of Ductile Iron grade SG- 400/15 or SG-500/7 or equivalent grade as per IS 1865,IS:3896-part2 and subsequent revisions with food grade epoxy powder coating (EP-P) of minimum 250 micron, inside and out side of colour Blue RAL 5005 and all internal parts such as Float,Shell,Cover Bolts etc made of austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with EPDM and generally conforming to BIS standards and Flange Drilled as per IS:1538 including transportation but excluding all taxes and as directed by Engineer-In-Charge. - 80mm dia
13
27557
358245.16
Manufacture, supply and delivery of Tamper proof DI Flanged Single Chamber Air release Valves with Body and cover made of Ductile Iron grade SG- 400/15 or SG-500/7 or equivalent grade as per IS 1865,IS:3896-part2 and subsequent revisions with food grade epoxy powder coating (EP-P) of minimum 250 micron, inside and out side of colour Blue RAL 5005 and all internal parts such as Float,Shell,Cover Bolts etc made of austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with EPDM and generally conforming to BIS standards and Flange Drilled as per IS:1538 including transportation but excluding all taxes and as directed by Engineer-In-Charge. - 100mm dia
1
35758
35758.9
Manufacture, supply and delivery of Tamper proof DI Flanged Single Chamber Air release Valves with Body and cover made of Ductile Iron grade SG- 400/15 or SG-500/7 or equivalent grade as per IS 1865,IS:3896-part2 and subsequent revisions with food grade epoxy powder coating (EP-P) of minimum 250 micron, inside and out side of colour Blue RAL 5005 and all internal parts such as Float,Shell,Cover Bolts etc made of austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with EPDM and generally conforming to BIS standards and Flange Drilled as per IS:1538 including transportation but excluding all taxes and as directed by Engineer-In-Charge. - 150mm dia
4
68565
274260.92
Manufacture, Supply and delivery of DI D/F Butterfly Valves, Body and disc of Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Double eccentrically designed Disc., with renewable soft seal on the disc and Integral Body seat face of nickel-chromium overlay welding (Fusion Bonded) micro finished, 100 % leak tight in both directions, Medium free bearings and with minimum thickness of 250 microns Fusion bonded food grade epoxy coating and 1200mm dia. and above food grade liquid Epoxy coating of minimum 150 microns applied on both body and disc inside and outside. Face to face dimensions as per EN558-1/IS 13095 body or IS: 13095 long body design standard as per EN 593/IS 5163 Flange drilling as per EN 1092-2/ IS 1538 the Valve should be suitable for buried application as directed by the Engineer-in-Charge. - 250mm dia
6
57083
342498.12
Manufacture, Supply and delivery of DI D/F Butterfly Valves, Body and disc of Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Double eccentrically designed Disc., with renewable soft seal on the disc and Integral Body seat face of nickel-chromium overlay welding (Fusion Bonded) micro finished, 100 % leak tight in both directions, Medium free bearings and with minimum thickness of 250 microns Fusion bonded food grade epoxy coating and 1200mm dia. and above food grade liquid Epoxy coating of minimum 150 microns applied on both body and disc inside and outside. Face to face dimensions as per EN558-1/IS 13095 body or IS: 13095 long body design standard as per EN 593/IS 5163 Flange drilling as per EN 1092-2/ IS 1538 the Valve should be suitable for buried application as directed by the Engineer-in-Charge. - 300mm dia
2
70205
140411.1
Manufacture, Supply and delivery of DI D/F Butterfly Valves, Body and disc of Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Double eccentrically designed Disc., with renewable soft seal on the disc and Integral Body seat face of nickel-chromium overlay welding (Fusion Bonded) micro finished, 100 % leak tight in both directions, Medium free bearings and with minimum thickness of 250 microns Fusion bonded food grade epoxy coating and 1200mm dia. and above food grade liquid Epoxy coating of minimum 150 microns applied on both body and disc inside and outside. Face to face dimensions as per EN558-1/IS 13095 body or IS: 13095 long body design standard as per EN 593/IS 5163 Flange drilling as per EN 1092-2/ IS 1538 the Valve should be suitable for buried application as directed by the Engineer-in-Charge. - 350mm dia
1
98090
98090.93
Manufacture, Supply and delivery of DI D/F Butterfly Valves, Body and disc of Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Double eccentrically designed Disc., with renewable soft seal on the disc and Integral Body seat face of nickel-chromium overlay welding (Fusion Bonded) micro finished, 100 % leak tight in both directions, Medium free bearings and with minimum thickness of 250 microns Fusion bonded food grade epoxy coating and 1200mm dia. and above food grade liquid Epoxy coating of minimum 150 microns applied on both body and disc inside and outside. Face to face dimensions as per EN558-1/IS 13095 body or IS: 13095 long body design standard as per EN 593/IS 5163 Flange drilling as per EN 1092-2/ IS 1538 the Valve should be suitable for buried application as directed by the Engineer-in-Charge. - 450mm dia
1
147300
147300.43
Manufacture, Supply and delivery of DI D/F Butterfly Valves, Body and disc of Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Double eccentrically designed Disc., with renewable soft seal on the disc and Integral Body seat face of nickel-chromium overlay welding (Fusion Bonded) micro finished, 100 % leak tight in both directions, Medium free bearings and with minimum thickness of 250 microns Fusion bonded food grade epoxy coating and 1200mm dia. and above food grade liquid Epoxy coating of minimum 150 microns applied on both body and disc inside and outside. Face to face dimensions as per EN558-1/IS 13095 body or IS: 13095 long body design standard as per EN 593/IS 5163 Flange drilling as per EN 1092-2/ IS 1538 the Valve should be suitable for buried application as directed by the Engineer-in-Charge. - 500mm dia
1
189948
189948.66
Manufacture, Supply and delivery of DI D/F Butterfly Valves, Body and disc of Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Double eccentrically designed Disc., with renewable soft seal on the disc and Integral Body seat face of nickel-chromium overlay welding (Fusion Bonded) micro finished, 100 % leak tight in both directions, Medium free bearings and with minimum thickness of 250 microns Fusion bonded food grade epoxy coating and 1200mm dia. and above food grade liquid Epoxy coating of minimum 150 microns applied on both body and disc inside and outside. Face to face dimensions as per EN558-1/IS 13095 body or IS: 13095 long body design standard as per EN 593/IS 5163 Flange drilling as per EN 1092-2/ IS 1538 the Valve should be suitable for buried application as directed by the Engineer-in-Charge. - 600mm dia
2
250640
501280.74
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 1 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as directed by the Engineer-In-Charge. - 80mm dia
11
4116
45283.92
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 1 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as directed by the Engineer-In-Charge. - 100mm dia
1
4556
4556.9
Supply and delivery of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewerage with Flanged (Welded) Ends confirming to IS: 8329/2000 in Standard Working length of 1 Mts for classification K9 with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation and as directed by the Engineer-In-Charge. - 150mm dia
4
7235
28940.16
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 80mm dia
26
198
5156.58
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 100mm dia
2
263
526.72
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 150mm dia
8
446
3571.04
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 250mm dia
7
1046
7325.64
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 300mm dia
2
1489
2979.86
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 350mm dia
1
2516
2516.21
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 450mm dia
1
4039
4039.92
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 500mm dia
1
4682
4682.95
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 600mm dia
2
7954
15908.06
Jointing DI Pipes, valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 80mm dia
26
240
6251.96
Jointing DI Pipes, valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 100mm dia
2
383
766.38
Jointing DI Pipes, valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 150mm dia
8
577
4621.2
Jointing DI Pipes, valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 250mm dia
6
874
5246.34
Jointing DI Pipes, valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 300mm dia
2
923
1847.76
Jointing DI Pipes, valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 350mm dia
1
1305
1305.29
Jointing DI Pipes, valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 450mm dia
1
2342
2342.08
Jointing DI Pipes, valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 500mm dia
1
2704
2704.43
Jointing DI Pipes, valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 600mm dia
2
3724
7449.7
Construction of 1.20 m x 1.20 m x 1.50 m RCC Sluice valve chambers for pipes of diameter 250mm & 300mm using M25 grade of concrete and Fe 500 Grade of Steel, form work, steel fabrication,curing and backfillg including cost and conveyance of all materials, labour charges etc complete and as directed by the Engineer-in-charge of the work etc complete. - Sluice valve chamber
9
34543
310892.94
Construction of 1.30 m x 1.30 m x 1.60 m RCC Sluice valve chambers for pipes of diameter 350mm & 400mm using M25 grade of concrete and Fe 500 Grade of Steel, form work, steel fabrication,curing and backfillg including cost and conveyance of all materials, labour charges etc complete and as directed by the Engineer-in-charge of the work etc complete. - Sluice valve chamber
1
39126
39126.89
Construction of 1.50 m x 1.40 m x 1.70 m RCC Sluice valve chambers for pipes of diameter 450mm & 500mm using M25 grade of concrete and Fe 500 Grade of Steel, form work, steel fabrication,curing and backfillg including cost and conveyance of all materials, labour charges etc complete and as directed by the Engineer-in-charge of the work etc complete. - Sluice valve chamber
1
45731
45731.37
Construction of 2.0 m x 1.70 m x 2.0 m RCC Sluice valve chambers for pipes of diameter 800mm using M25 grade of concrete and Fe 500 Grade of Steel, form work, steel fabrication,curing and backfillg including cost and conveyance of all materials, labour charges etc complete and as directed by the Engineer-in-charge of the work etc complete. - Sluice valve chamber
1
67089
67089.39
Construction of 2.10 m x 1.80 m x 2.10 m RCC Sluice valve chambers for pipes of diameter 900mm using M25 grade of concrete and Fe 500 Grade of Steel, form work, steel fabrication,curing and backfillg including cost and conveyance of all materials, labour charges etc complete and as directed by the Engineer-in-charge of the work etc complete. - Sluice valve chamber
2
83804
167609.84
Construction of granular sub-base by providing HBG meterial confirming to Grading-V of MORT & H Table-400-1 including cost and conveyance of all materials to work site and spreading uniform layers with motor grader or by approved means on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete for finished item of work as per clause 401 MORTH(5th Revision) as directed by the Engineer-in-Charge - Road Restoration
993.55
2160
2146554.84
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including cost and conveyance of all materials and labour charges etc,Complete and as directed by the Engineer-In-Charge. - Road Restoration
264.6
7050
1865474.98
Providing and applying prime coat with bitumen emulsion (SS-1) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means for finished item of work as per MoRT&H Specification 502 (5th Revision) and as directed by the Engineer-in-charge. - Road Restoration
5111.7
40
204672.47
Providing and applying tack coat with bitumen Emulsion (Rapid settting) (Bulk) using Emulsion pressure distributor at the rate of 0.25 kgs per sqm on the prepared granular surface, treated with primer, cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge. - Road Restoration
5111.7
14
73966.3
Providing Bituminous Concrete of minimum 40mm thickness with 100-120 TPH Batch Mix type/ 40-60 TPH hot mix plant using HBG crushed aggregates of Grading-II as per table 500-17 of specification 507 of MoRT&H (5th Revision), premixed with bitumen binder VG 30 Grade @ 5.4 % of mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specification 507 (5th Revision) complete for finished item of work in all respects as directed by Engineer-in-Charge - Road Restoration
204.47
9920
2028454.86
Cutting of open B.T. Road surface (as well as asphalt concrete upto 75mm thick) including water bound macadam including stacking of excavated materials for laying of pipe lines as per the standard specifications and as directed by the Engineer-In-Charge. - for Pipe line trenches
1511.95
166
251074.42
Cutting of open CC Road Surface including stacking of excavated material for pipe line trench with concrete saw cutting machine s per the standard specifications and as directed by the Engineer-In-Charge. - For pipe line trenches
921.42
5379
4956871.03
Earthwork excavation in all type of soils by mechanical means for pipe line trenches and structures as per drawing and technical specification, setting out, removal of stumps and other deleterious matter, dressing sides of bottom, back filling with the excavated earth to the extent required and disposal of surplus earth with all lifts and lead upto 1 KM etc., complete including charges for finished item of work as per MoRT&H specification 301 (5th Revision) or as per latest revisions and specifications and as directed by the Engineer-in-Charge. In all types of soil including ordinary rock by mechanical means upto 3m depth
4483.78
133
599795.25
Earthwork excavation in all type of soils by mannual means for pipe line trenches and structures as per drawing and technical specification, setting out, removal of stumps and other deleterious matter, dressing sides of bottom, back filling with the excavated earth to the extent required and disposal of surplus earth with all lifts and lead upto 50m etc., complete including charges for finished item of work as per MoRT&H specification 301 (5th Revision) or as per latest revisions and specifications and as directed by the Engineer-in-Charge. In all types of soil including ordinary rock by mannual means where deph upto 3m.
1902.38
332
632921.83
Bailing out water from the pipe line trenches with oil engine driven pump sets including hire charges, fuel charges, wages of driver and helper etc., complete as per the technical specifications and as directed by the Engineer-in-Charge.- For pipe line trenches
52
52
2719.08
Providing & laying Sand bedding in the pipeline trenches as per drawing including cost and conveyance of materials to site with all leads & lifts including watering, tamping, raming all other incidental and operational charges etc., complete as per technical specification Clause 305.3.9 MORD & 304 MORTH (5th Revision) or as per latest revisions and specifications and as directed by the Engineer - in - charge. - HDPE Pipe Bedding
625.35
440
275204.03
Supply and delivery of Centrifugally Cast( Spun) Ductile Iron K9 Class Pressure Pipes for Water, Gas and Sewerage with Socket Spigot Ends confirming to IS: 8329/2000 in Standard Working lengths of 4.0m, 5.0m, 5.50m & 6.0m for Push-On -Joint (Rubber Gasket D Jointing) with cement mortor lining inside the pipes with out side zinc coating, inclusive of Transportation to site, unloading & stacking and as directed by the Engineer - in - charge. - 350mm dia
40
5778
231126.8
Manufacture, supply, & delivery of HDPE pipes grade PE 100 PN-6 kg/sqcm conforming to IS 4984 - 1995 including transportation to any where in A.P but excluding taxes and as directed by the Engineer-In-Charge. - 110mm
8725
380
3322829
Manufacture, supply, & delivery of HDPE pipes grade PE 100 PN-6 kg/sqcm conforming to IS 4984 - 1995 including transportation to any where in A.P but excluding taxes and as directed by the Engineer-In-Charge. - 160mm
990
797
789307.2
Manufacture, supply, & delivery of HDPE pipes grade PE 100 PN-6 kg/sqcm conforming to IS 4984 - 1995 including transportation to any where in A.P but excluding taxes and as directed by the Engineer-In-Charge. - 200mm
170
1242
211264.1
Manufacture, supply, & delivery of HDPE pipes grade PE 100 PN-6 kg/sqcm conforming to IS 4984 - 1995 including transportation to any where in A.P but excluding taxes and as directed by the Engineer-In-Charge. - 250mm
165
1937
319707.3
Supply & Delivery of Centrifugal Cast (spun) Ductile Iron fittings PN 16 conforming to IS: 9523/2000 having dimensions as per BIS, with zinc coating externally and inside mortar lining (with finishing as per clause 13/IS9523/2000) including transportation to site of work and as directed by the Engineer-In-Charge. - Upto 500 mm dia
514
154
79166.28
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) equal tee Fittings cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 110mm dia
88
540
47591.28
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) Bends Fittings cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 110mm dia
12
554
6653.28
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) Fittings - End Caps cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 110mm dia
18
160
2880.36
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) Fittings - Flanges cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 110mm dia
44
215
9498.28
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) equal tee Fittings cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 160mm dia
2
1937
3874.28
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) Bends Fittings cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 160mm dia
2
1609
3219.84
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) Fittings - End Caps cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 160mm dia
1
398
398.79
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) Fittings - Flanges cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 160mm dia
6
421
2529.06
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) Fittings - Reducers cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 160 x 140 mm
3
943
2829
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) Fittings - Reducers cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 140 x 125 mm
3
676
2028.03
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) Fittings - Reducers cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 125 x 110 mm
3
487
1462.23
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) equal tee Fittings cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 200mm dia
1
3615
3615.23
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) Fittings - Bends cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 200mm dia
1
3130
3130.09
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) Fittings - Flanges cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 200mm dia
2
769
1538.34
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) Fittings - Reducers cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 200 x 180 mm
1
1684
1684.91
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) Fittings - Reducers cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 180 x 160 mm
1
1303
1303.16
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) equal tee Fittings cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 250mm dia
1
7029
7029.36
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) Bends Fittings cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 250mm dia
1
6089
6089.76
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) Fittings - Flanges cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 250mm dia
2
1140
2281.38
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) Fittings - Reducers cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 250 x 225 mm
1
2818
2818.79
Manufacture, Supply and delivary of HDPE (PE- 100 Grade) Fittings - Reducers cofirming to IS 4984-2016 including transportation tio anywhere in Andhra Pradesh excluding all taxes as directed by Engineer-In-Charge. - 225 x 200 mm
1
2067
2067.79
Manufacture, supply and delivery of S.B.R. Quality Rubber as per BIS:12820/89 with confirming to BIS:5382/85, Rubber Gaskets suitable for CI, DI, S/S pipes including cost of material, loading, incidental, handling with companys standard packing, transportation, unloading & stacking and as directed by the Engineer - in - charge for 350mm Dia
19
302
5742.18
Lowering CI / DI pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Ref to specifications. BIS No: 3114/1994) and as directed by Engineer -in-Charge for 350mm dia
40
344
13792.8
Jointing CI / DI pipes and fittings with rubber gasket (push-on-joints), excluding the cost of gasket but including all sundries, filling with water, with a water lead up to 500 meters and testing to required pressure etc complete.(Reference to specifications BIS No.3114 / 1994 / 12288 / 1997). and as directed by Engineer-in-charge for 350mm dia
19
355
6758.68
Lowering, Laying and jointing of HDPE pipes including specials/fittings by butt fusion welding as per IS:7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure etc all to complete the work item as directed by the Engineer-in-Charge. - 110mm dia
8725
66
580125.25
Lowering, Laying and jointing of HDPE pipes including specials/fittings by butt fusion welding as per IS:7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure etc all to complete the work item as directed by the Engineer-in-Charge. - 160mm dia
990
98
97128.9
Lowering, Laying and jointing of HDPE pipes including specials/fittings by butt fusion welding as per IS:7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure etc all to complete the work item as directed by the Engineer-in-Charge. - 200mm dia
170
143
24427.3
Lowering, Laying and jointing of HDPE pipes including specials/fittings by butt fusion welding as per IS:7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure etc all to complete the work item as directed by the Engineer-in-Charge. - 250mm dia
165
165
27327.3
Supply and placing of the VRCC M30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with minimum cement content of 407kg/Cum, 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as directed by the Engineer -In- Charge. - Thrust Blocks
3.39
6531
22142.94
Providing High Yield Strength Deformed (HYSD) /Thermo Mechanically Treated (TMT) bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, including sales and other taxes on all materials etc., complete for finished item of work as directed by the Engineer-In-Charge.
0.03
94211
2826.33
Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover, Wedge, Stufffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem, Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze (IS 318); Gasket with Neoprene Rubber; Gland packing with Rubber; Gear, Gear housing with Cast Steel as directed by Engineer-In-Charge. - 100mm dia
6
17178
103071.54
Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover, Wedge, Stufffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem, Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze (IS 318); Gasket with Neoprene Rubber; Gland packing with Rubber; Gear, Gear housing with Cast Steel as directed by Engineer-In-Charge. - 150mm dia
1
25231
25231.05
Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover, Wedge, Stufffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem, Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze (IS 318); Gasket with Neoprene Rubber; Gland packing with Rubber; Gear, Gear housing with Cast Steel as directed by Engineer-In-Charge. - 200mm dia
1
40679
40679.85
Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover, Wedge, Stufffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem, Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze (IS 318); Gasket with Neoprene Rubber; Gland packing with Rubber; Gear, Gear housing with Cast Steel as directed by Engineer-In-Charge. - 250mm dia
1
56580
56580.78
Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover, Wedge, Stufffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem, Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze (IS 318); Gasket with Neoprene Rubber; Gland packing with Rubber; Gear, Gear housing with Cast Steel as directed by Engineer-In-Charge. - 350mm dia
1
117774
117774.73
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 100mm dia
6
263
1580.16
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 150mm dia
1
446
446.38
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 200mm dia
1
736
736.41
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 250mm dia
1
1046
1046.52
Lowering, keeping in position and fixing DI valves excluding cost of bolts, nuts, rubber insertion, Butterfly valve and tail pieces and as directed by the Engineer-in-Charge.- 350mm dia
1
2516
2516.21
Jointing DI Pipes ,valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 100mm dia
6
383
2299.14
Jointing DI Pipes ,valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 150mm dia
1
577
577.65
Jointing DI Pipes ,valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 200mm dia
1
625
625.92
Jointing DI Pipes ,valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 250mm dia
1
874
874.39
Jointing DI Pipes ,valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994) and as directed by the Engineer-In-Charge.- 350mm dia
1
1305
1305.29
Construction of 0.90 m x 0.90 m x 1.25 m RCC Sluice valve chambers for for pipes of diameter 100mm,150mm & 200mm using M25 grade og concrete and Fe 500 Grade of Steel, Form work,steel fabrication like cutting,bending including cost and conveyance of all materials, labour charges and as directed by the Engineer-in-charge of the work etc complete. - Sluice valve chambers
8
23364
186915.92
Construction of 1.0 m x 1.0 m x 1.35 m RCC Sluice valve chambers for for pipes of diameter 250mm & 300mm using M25 grade og concrete and Fe 500 Grade of Steel, Form work,steel fabrication like cutting,bending, including cost and conveyance of all materials, labour charges and as directed by the Engineer-in-charge of the work etc complete. - Sluice valve chambers
1
27070
27070.98
Construction of 1.20 m x 1.20 m x 1.60 m RCC Sluice valve chambers for for pipes of diameter 350mm & 400mm using M25 grade og concrete and Fe 500 Grade of Steel, Form work,steel fabrication like cutting,bending, including cost and conveyance of all materials, labour charges and as directed by the Engineer-in-charge of the work etc complete. - Sluice valve chambers
1
42504
42504
Construction of granular sub-base by providing HBG meterial confirming to Grading-V of MORT & H Table-400-1 including cost and conveyance of all materials to work site and spreading uniform layers with motor grader or by approved means on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete for finished item of work as per clause 401 MORTH(5th Revision) as directed by the Engineer-in-Charge - Road Restoration
937.54
2160
2025545.79
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including cost and conveyance of all materials and labour charges etc,Complete and as directed by the Engineer-In-Charge. - Road Restoration
816.09
7050
5753573.24
Providing and applying prime coat with bitumen emulsion (SS-1) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means for finished item of work as per MoRT&H Specification 502 (5th Revision) and as directed by the Engineer-in-charge. - Road Restoration
1511.95
40
60538.48
Providing and applying tack coat with bitumen Emulsion (Rapid settting) (Bulk) using Emulsion pressure distributor at the rate of 0.25 kgs per sqm on the prepared granular surface, treated with primer, cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge. - Road Restoration
1511.95
14
21877.92
Providing Bituminous Concrete of minimum 40mm thickness with 100-120 TPH Batch Mix type/ 40-60 TPH hot mix plant using HBG crushed aggregates of Grading-II as per table 500-17 of specification 507 of MoRT&H (5th Revision), premixed with bitumen binder VG 30 Grade @ 5.4 % of mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specification 507 (5th Revision) complete for finished item of work in all respects as directed by Engineer-in-Charge. - Road Restoration
60.48
9920
599994.86
Providing of 15mm dia House Service Connection on distribution pipe line as per standard specification including the cost of the materials like PP Clamp saddle with SS-304 insert, Compression male/female threaded adaptor with SS insert , Flow Control Valve SS 316 NRV 10LPM, Double Compression elbow, MDPE PE-80/100 Blue pipe with pressure rating PN16, Brass bib cock heavy duty including cost of materials, loading, unloading, stacking, transit insurance, transportation, required for the fulfilling of job, cost includes earthwork excavation, road restoration using GSB of Grade V with min 100mm thick and RCC M30 grade of Concrete with minimum 150mm thick,compaction,surface preparation,curing etc complete for finished item of work as per the approved Drawing and as directed by the Engineer-In-Charge.- CC Road Surface - 110 x 1/2"
1975
2573
5081675
Providing of 15mm dia House Service Connection on distribution pipe line as per standard specification including the cost of the materials like PP Clamp saddle with SS-304 insert, Compression male/female threaded adaptor with SS insert , Flow Control Valve SS 316 NRV 10LPM, Double Compression elbow, MDPE PE-80/100 Blue pipe with pressure rating PN16, Brass bib cock heavy duty including cost of materials, loading, unloading, stacking, transit insurance, transportation, required for the fulfilling of job, cost includes earthwork excavation, road restoration using GSB of Grade V with min 100mm thick and RCC M30 grade of Concrete with minimum 150mm thick,compaction,surface preparation,curing etc complete for finished item of work as per the approved Drawing and as directed by the Engineer-In-Charge.- CC Road Surface - 160 x 1/2"
150
2546
381900
Providing of 15mm dia House Service Connection on distribution pipe line as per standard specification including the cost of the materials like PP Clamp saddle with SS-304 insert, Compression male/female threaded adaptor with SS insert , Flow Control Valve SS 316 NRV 10LPM, Double Compression elbow, MDPE PE-80/100 Blue pipe with pressure rating PN16, Brass bib cock heavy duty including cost of materials, loading, unloading, stacking, transit insurance, transportation, required for the fulfilling of job, cost includes earthwork excavation, road restoration using GSB of Grade V with min 100mm thick and RCC M30 grade of Concrete with minimum 150mm thick,compaction,surface preparation,curing etc complete for finished item of work as per the approved Drawing and as directed by the Engineer-In-Charge.- CC Road Surface - 200 x 1/2"
600
2773
1663800
PProviding of 15mm dia House Service Connection on distribution pipe line as per standard specification including the cost of the materials like PP Clamp saddle with SS-304 insert, Compression male/female threaded adaptor with SS insert , Flow Control Valve SS 316 NRV 10LPM, Double Compression elbow, MDPE PE-80/100 Blue pipe with pressure rating PN16, Brass bib cock heavy duty including cost of materials, loading, unloading, stacking, transit insurance, transportation, required for the fulfilling of job, cost includes earthwork excavation, road restoration using GSB of Grade V with min 100mm thick, Prime Coat,Tack coat for Grannular Surface and Bituminious Concrete with V30 Grade Bitumen of 25mm thick,Compaction as per MORTH guide lines etc complete for finished item of work as per the approved Drawing and as directed by the Engineer-In-Charge.- BT Road Surface - 110 x 1/2"
600
2082
1249200
PProviding of 15mm dia House Service Connection on distribution pipe line as per standard specification including the cost of the materials like PP Clamp saddle with SS-304 insert, Compression male/female threaded adaptor with SS insert , Flow Control Valve SS 316 NRV 10LPM, Double Compression elbow, MDPE PE-80/100 Blue pipe with pressure rating PN16, Brass bib cock heavy duty including cost of materials, loading, unloading, stacking, transit insurance, transportation, required for the fulfilling of job, cost includes earthwork excavation, road restoration using GSB of Grade V with min 100mm thick, Prime Coat,Tack coat for Grannular Surface and Bituminious Concrete with V30 Grade Bitumen of 25mm thick,Compaction as per MORTH guide lines etc complete for finished item of work as per the approved Drawing and as directed by the Engineer-In-Charge.- BT Road Surface - 160 x 1/2"
300
2055
616500
PProviding of 15mm dia House Service Connection on distribution pipe line as per standard specification including the cost of the materials like PP Clamp saddle with SS-304 insert, Compression male/female threaded adaptor with SS insert , Flow Control Valve SS 316 NRV 10LPM, Double Compression elbow, MDPE PE-80/100 Blue pipe with pressure rating PN16, Brass bib cock heavy duty including cost of materials, loading, unloading, stacking, transit insurance, transportation, required for the fulfilling of job, cost includes earthwork excavation, road restoration using GSB of Grade V with min 100mm thick, Prime Coat,Tack coat for Grannular Surface and Bituminious Concrete with V30 Grade Bitumen of 25mm thick,Compaction as per MORTH guide lines etc complete for finished item of work as per the approved Drawing and as directed by the Engineer-In-Charge.- BT Road Surface - 200 x 1/2"
150
2184
327600
PProviding of 15mm dia House Service Connection on distribution pipe line as per standard specification including the cost of the materials like PP Clamp saddle with SS-304 insert, Compression male/female threaded adaptor with SS insert , Flow Control Valve SS 316 NRV 10LPM, Double Compression elbow, MDPE PE-80/100 Blue pipe with pressure rating PN16, Brass bib cock heavy duty including cost of materials, loading, unloading, stacking, transit insurance, transportation, required for the fulfilling of job, cost includes earthwork excavation, road restoration using GSB of Grade V with min 100mm thick, Prime Coat,Tack coat for Grannular Surface and Bituminious Concrete with V30 Grade Bitumen of 25mm thick,Compaction as per MORTH guide lines etc complete for finished item of work as per the approved Drawing and as directed by the Engineer-In-Charge.- Gravel Road Surface - 200 x 1/2"
90
1504
135360
Operation & Maintenanace Staff for Length of the Sewer up to 10 Km for the Project execution period 2024-2025 (PART - C - Table 5.1) & for the installed 20 kw Pump sets for Project execution period 2024-2025 (PART - C - Table 5.2) Fitters Class I
5400
1221
6594696
Operation & Maintenanace Staff for Length of the Sewer up to 10 Km for the Project execution period 2024-2025 (PART - C - Table 5.1) & for the installed 20 kw Pump sets for Project execution period 2024-2025 (PART - C - Table 5.2) Electrician
5400
1213
6553224
Operation & Maintenanace Staff for Length of the Sewer up to 10 Km for the Project execution period 2024-2025 (PART - C - Table 5.1) & for the installed 20 kw Pump sets for Project execution period 2024-2025 (PART - C - Table 5.2) Operators
5400
917
4951800
Operation & Maintenanace Staff for Length of the Sewer up to 10 Km for the Project execution period 2024-2025 (PART - C - Table 5.1) & for the installed 20 kw Pump sets for Project execution period 2024-2025 (PART - C - Table 5.2) Heper Semi Skilled
(Electrician/Fitter)
18000
983
17696520
Operation & Maintenanace Staff for Length of the Sewer up to 10 Km for the Project execution period 2024-2025 (PART - C - Table 5.1) & for the installed 20 kw Pump sets for Project execution period 2024-2025 (PART - C - Table 5.2) Un Skilled Mazdoor
18000
914
16452180
Manufacture, Supply and Delivery of Cast Iron Pipes and Fittings (spls.) Conforming to IS. No. 7181/1986, 5531/1988, 3950/1979 and C.I.D Joints confirming to is No.8794/1988 at site of work anywhere in A.P. Including, loading, unloading, transportation to site of work stacking at site transit risk and package, excluding taxes and duties. @3kg/No
900
87
78363
Attending to leaking socket / spigots joints in CI / DI pipes in all types of road surfaces including concrete and asphalt roads, with necessary earth work excavation including using of pneumatic breakers and JCB excavator wherever required for jointing DI MJ clamp and its accessories such as rubber gaskets made of SBR / EPDM on the socket face, making the socket / spigot joint water tight at the operating pressure, backfilling with available earth and consolidation and bailing out water wherever necessary etc complete as directed by the Engineer In Charge For CI / DI pipes of 250mm dia.
60
954
57240
Attending to leaking socket / spigots joints in CI / DI pipes in all types of road surfaces including concrete and asphalt roads, with necessary earth work excavation including using of pneumatic breakers and JCB excavator wherever required for jointing DI MJ clamp and its accessories such as rubber gaskets made of SBR / EPDM on the socket face, making the socket / spigot joint water tight at the operating pressure, backfilling with available earth and consolidation and bailing out water wherever necessary etc complete as directed by the Engineer In Charge For CI / DI pipes of 300mm dia.
60
1254
75240
Attending to leaking socket / spigots joints in CI / DI pipes in all types of road surfaces including concrete and asphalt roads, with necessary earth work excavation including using of pneumatic breakers and JCB excavator wherever required for jointing DI MJ clamp and its accessories such as rubber gaskets made of SBR / EPDM on the socket face, making the socket / spigot joint water tight at the operating pressure, backfilling with available earth and consolidation and bailing out water wherever necessary etc complete as directed by the Engineer In Charge For CI / DI pipes of 350mm dia.
60
1289
77340
Attending to leaking socket / spigots joints in CI / DI pipes in all types of road surfaces including concrete and asphalt roads, with necessary earth work excavation including using of pneumatic breakers and JCB excavator wherever required for jointing DI MJ clamp and its accessories such as rubber gaskets made of SBR / EPDM on the socket face, making the socket / spigot joint water tight at the operating pressure, backfilling with available earth and consolidation and bailing out water wherever necessary etc complete as directed by the Engineer In Charge For CI / DI pipes of 400mm dia.
60
1406
84360
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%