Municipal Corporation Tender

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

RCC M-20 Nominal mix (Cement fine aggregate: coarse aggregate) correspondingto Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc. to site and excluding Seigniorage charges, Sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, centering, shuttering and curing etc. complete but excluding cost of steel and its fabrication charges etc. complete as per S.S. for finished item of work. For Column footings

RCC M-20 Nominal mix (Cement fine aggregate: coarse aggregate) correspondingto Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc. to site and excluding Seigniorage charges, Sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, centering, shuttering and curing etc. complete but excluding cost of steel and its fabrication charges etc. complete as per S.S. for finished item of work. For Columns

RCC M-20 Nominal mix (Cement fine aggregate: coarse aggregate) correspondingto Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc. to site and excluding Seigniorage charges, Sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, centering, shuttering and curing etc. complete but excluding cost of steel and its fabrication charges etc. complete as per S.S. for finished item of work. For Plinth Beam

RCC M-20 Nominal mix (Cement fine aggregate: coarse aggregate) correspondingto Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc. to site and excluding Seigniorage charges, Sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, centering, shuttering and curing etc. complete but excluding cost of steel and its fabrication charges etc. complete as per S.S. for finished item of work. For Pedestals

Providing Flooring with Cement Concrete 1:3:6, using 40mm and 20mm metal, 100mm thick including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying including steel and other taxes on all materials etc. complete for finished item of work in all floors (APSS No. 126). etc., complete as per ss and as directed by the site engineer.

Providing Brick Masonry in CM (1:6) with Bricks with traditional size 23 x 11 x 7 cms 2nd class etc. complete Including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Providing Plastering with CM (1:4), 12mm thick single coat in CM including cost and conveyance of all materials like cement, sand, water etc. to site excluding seigniorage charges, sales and other taxes on all materials, and all operational, incidential charges on materials and including cost of all labour charges for mixing motor, finishing, curing as directed by engineer-in-charge etc. complete for finished item of work (SS 901, 903 & 904)

Cost, supply and fixing of M.S. Pipes 5mm thick including cutting, welding with all plates with fabrication charges including cost of all materials, conveyance bolts and nuts, fixing in position etc. complete as directed by the Site Engineer.

Painting with Synthetic Enamel paints - Two coats for new Iron work of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911

Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness, coating: Alu-Zinc coating AZ 150 gSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns. (Bottom): 5 to 7 Microns. Sheet width: 1.020, Length: Maximum 12 Meters with Regular range coloums including necessary G.I. scan bolts, nuts G.I. 'J' bolts limpet washers and Bitumen washers etc. complete as per S.S.

Supply and fixing of Rolling Shutter made of made of 80 x 1.25 mm Machine rolled CRCA laths interlocked together through their entire length and jointed together at the ends by endlocks, mounted onspecially designed pipe shaft of 50mm dia nominal bore MS 'B' class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with Push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer,locks ball bearings, allaccessories etc. complete for finished item of work as per Special Spn:1108

Part-II

Details of Maximum amount reimbursable to the Contractor.

1. Provision for GST @ 12%

2. Provision for NAC @0.10%

3. Provision for Seigniorage Charges