Municipal Corporation Tender

Providing of (110mm dia HDPE) Pipe line;Lowering C.I. Pipes, A class and specials with s/s ends carefully into trench and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Reference to specifications. BIS No.3114/94)

Providing of (110mm dia HDPE) Pipe line;Manufacture, supply and delivery of the CID joints and including cost of ISI marked rubber rings of IS 10292-1988,Bolts and nuts conforming to IS 1363 part 1& part111/1984 etc and all labour charges etc. Complete as per SS

Providing of (110mm dia HDPE) Pipe line;Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin , Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel including transportation but excluding Taxes. (P.H Items, P.97)

Providing of (110mm dia HDPE) Pipe line;Earthwork excavation in Ordinary soil by Mechanical Means upto 3 m depth for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(B)) - 1 Cum

Providing of (110mm dia HDPE) Pipe line;Dust Filling of foundation trenches as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Providing of (110mm dia HDPE) Pipe line;Laying and jointing of H.D.P.E Pipes by butt fusion welding as per IS:7634?part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure - 1 Rmt (Public Health Items, P.5)

Providing of (110mm dia HDPE) Pipe line;Labour charges for lowering and keeping in position of D.I. Sluice valves(with cap/with hand wheel), reflux valves and scour valves. Unit each

Providing of (110mm dia HDPE) Pipe line;Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD - 1 Cum (RBR-CCPV-5)

Providing of (110mm dia HDPE) Pipe line;Carting away the surplus excavated earth from the work site with a lead of 1 km beyond initial lead including loading, unloading and conveyance but excluding stacking charges etc., complete - 1 Cum.