Municipal Corporation Tender

Collection and supply of 2.36mm to 5mm HBG Chipse/Quarry dust from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (Footings )

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (For Tie BEAM / PLINTH BEAM)

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (for COLUMNS)

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work,Inluding centering, shuttering cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (For Roof Beam)

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (for Lintels)

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (Slab 125mm thick)

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work in all floors (APSS No. 126). etc., complete as per ss and as directed by the site engineer.

PCC grade M20 (MORD) Providing Plain Cement Concrete Nominal Mix (1:2:4) using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. for Approaches etc. (for Mechanical Mixer)

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade) Cement component not less than 400Kgs / cum, coarse and fine aggregates conforming to IS:383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

Providing Brick Masonry in CM (1:5) with Bricks with traditional size 23 x 11 x 7 cms 2nd class etc. complete Including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials,conveyance charges of materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., excluding seigniorage charges on all materials. Complete for finished item of work as per ss and as directed by the site engineer.

Providing Plastering with CM (1:4), 12mm thick single coat in CM including cost and conveyance of all materials like cement, sand, water etc. to site excluding seigniorage charges on all materials, Including all operational, incidential charges on materials and cost of all labour charges for mixing motor, finishing, curing as directed by engineer-in-charge etc. complete for finished item of work (SS 901, 903 & 904)

Providing Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., excluding seigniorage charges, complete for finished item of work, including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Providing skirting to internal walls to 15cm height with vitrified tiles 8mm thick of 1st quality normal colour, length equal to flooring tiles, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spreading @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand, water etc. excluding seigniorage charges on all materials,complete for finished item of work.including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Exterior walls are painted with one coat of primer and 2 coats of exterior emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911 for external walls

Providing & Fixing of Scientific Doorswith metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with ZincPhosphate Primer to receive any paint on site or finished with ThermosettingPolyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete forfinished item of work for Single leaf Door

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm).

Supply, Delivery & Fixing of MS Gates., as directed by Engineer-in-charge of the work, the rate includes fabrication, transportation, erection & fixing at work site and painting with red oxide coat etc., and overheads & contractors profit complete for finished item of work .

Painting with Synthetic Enamel paints in all shades Grade - II having VOC (Volatile Organic Compound ) content less than 50 grams/ liter. - Two Coat - for New Iron Work as directed by the Departmental Officer-in-charge of the work.

Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheet with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours including cost and conveyance of all materials and labour charges etc., complete as per ss and as directed by the site engineer.

Supply, Delivery & Commissioning of the weigh bridge of the 20MT capacity, PL size 20 ft x 10ft,Pitless type with the following specifications that includes digital indicator,lighting and surge protection load cells -6 Nos,junction box ,shielded signal cable windows based SMS camera email software steel structure free annual maitenance up to 3 visits ,fasteners,testing with the following specifications that includes the cost fabrication commissioning at work site,excludes the civil work for commissioning complete for finished item of work as directed by Engineer-in-charge 1. STEEL STRUCTURE with 6 load cells , MAIN BEAMS : ISMB 200 mm CROSS BEAMS : JISMB 200MM , PLATE :10mm -SAIL 2.Double Ended Shear Beam Load Cell, Specifications: Rated capacity: 15MT Full scale output (MVN) : 2/3.00, Non-Linearity (FSO): +/-0.020%, Creep (FSO) in 30 min: +/- 0,020%, Zero return (FSO) : +/- 0.002% Safe overload (FSO): 150% 3.Digital Indicator:6 digit 7 segment LED display having interface RS 232C linear digital calibration,microprocessor basaed measuring system MAKE:Nepro/dept approved. 4.that software shall be of single user weight bridge management software,VB6.0 with SQL management having advanced SMS camera integration with email facility and must include all basis features such as vehicle/owner/material registration and selection multi way model selection related transaction reports secure user modes with passwords date wise material wise party wise report generation mechanism instatnt SMS facilty to store main 2000 transactions with camera image capturing for billing with accumulated email reports can be downloaded in excel format.calender to display day of the week date month seconds with alarm for every hour user interactions windows IBM compatible at key board 5.printer with laser jet with COM port connectivity from indicator/printer with parallel port (LPT) computer to printer DOT matrix printer of make TVS(MSP star 250)/Epson(LX310)/dept approved.laser jet printer shall be of canon2900/dept approved. 6.painting:finishing platform shall be prepared and painted with approved shade of epoxy coat what a primer to thinner rartio

Labour charges for 1) skilled electrician 2 no and helper-2 sco[e of work:1) setting up of motor load checking testing etc

supply and fixing of 25mm dia outer dia (1.60-1.80)mm thickness medium grade with IS 9537-part 3 rigid PVC conduit of make recision/universal & marudhar/VIP /goldmedal/million plast /GM/Sudhakar/anchor/polyline/ploycab/orbit/AKG (ISI Mark) with all accessories for switches for lights fans and seperate plug point including cost of all materials conveyance and all labour charges etc complete

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 &IS:17048/2018 specification for copper cable. of As per list of recommended brands of catergory-I Makes: Finolex / RR kabel/Havells/ Finecab/KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/ Anchor /Million / APAR(Anushakthi) in existing pipe with 6A Switch, ceiling rose and 3mm thick Hylam sheet covering to switch control box including cost of all material and all labour charges etc. complete for light, bell, fan and exhaust fan points in Non- Residential Buildings.

Supply and run of 2 of 56 / 0.30mm (4 Sq.mm) Fire Retardent (FR) P.V.C. insulated flexible coper cable Makes:Finolex / RR kabel / Havells/Finecab/KEI/Polycab/Gloster /Goldmedal/GM/ Fortune Arrt/Anchor/Million/APAR(Anushakthi) in existing pipe for mains including all labour charges etc. complete.

Supply and Run of 4 of 10 Sq.mm WPSC Alluminium cable Make GoldMedal/Million/GM/Vimal/Finecab/ Nakoda /Plaza/ Payal / Sudhakar/Rajnigandha/Airson /Orbit/ollvin/Beljin along with No. 10 SWG G.I. bearer wire through PVC cleats with all accessaries including labour charges etc. complete for service mains.

Providing indipendent earthing by excavating a trench to a depth of 2.10Mtrs. in all soils, as per size specified in the Data, using 40mm dia."B" Class G.I.pipe of 2.50Mtrs. length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equel proportion of Salt and Charcoal in layers and all labour charges etc. complete for small quarters.

Supply and Fixing of 6A /10A 3/2 Pin Module Modular Socket with shutter 6A Switch control on a common switchof make of make :Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)/Anchor (Roma PLUS)/Precision(Series7)/Honeywell(Blenzepro) with earth continuity including wire leads, earth connections along with all labour charges etc. complete .

Supply and Fixing of 16A/20 1 way Combi switch Modular Socket with shutter. Makes: Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus.with metal box of 6"x8" size including earth connection and all labour charges etc. complete.

supply of not less than 1100mm length BOX type powder coated tube light luminiaire with necessary wiring suitable for fixing 1no retrofit T8 LED tube but without tube and choke

Supply of 48" (1200mm) Sweep decorative Ceiling Fan, with double ball bearings with all accessories without Regulator. Makes: As per list of recommended brands.

Supply of 8" (200mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: As per list of recommended brands.

Supply and Transportation of 1.0 HP(25x25mm)Single phase Mono block CI body motor pumpset confirms to IS 9079:2002 Makes: As per list of recommended brands as category II.

Supply and transportation of 50W/60W LED Flood light Luminaire made of pressure diecast aluminum housing with powder coated, having protective toughened glass, supply Input voltage 120 - 270 V AC, P.F 0.90, high power LEDs, with a System Efficacy =120 lumens/watt and junction temperature 70°C, with ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, driver surge protection 4KV, In-house additional surge protection ≥ 10KV with wide/ narrow beam optics, THD90%, , CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I.

a) Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

providing water supply connections from the overhead polyethylene tank that includes placing of the tank providing inlet and outlet connections as specified by the departmental authorities interconnections to the nearest distribution lines fitting of taps /valves/bib cocks,from sump to the over head tank etc complete including labour charges testing charges but excluding material charges

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)22.20mm ODPipe - SDR 13.5

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)15.90 mm OD pipes SDR 13.5

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)28.60mm OD pipes SDR 13.5

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)34.90mm ODPipe - SDR 13.5

Labour charges for laying, joining, welding, fixing and commissioning the PPR pipes including all specials such as couplers/ bends/ tees etc including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with welding the joint as per standard practice - up to 40 mm dia

S&F gunmetal (GM) ball valve with SS ball and SS spindle as per IS class-1 indian make heavy type-20mm NB size

S & F CP Short body bib cock fancy type deluxeheavy duty 12.7 mm dia Indian make including cost and conveyance of all materials to site labour etc complete for finished item of work

S & F CP long body bib cock fancy type deluxeheavy duty 12.7 mm dia Indian make including cost and conveyance of all materials to site labour etc complete for finished item of work

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Single C.P. Pillar cock

providing Vinyl stickering of required size for the name board over the existing sheet frame including all the charges of designing transportation fixing stickering complete as directed by the departmental officer incharge of work