Municipal Corporation Tender

Collection and supply of 2.36mm to 5mm HBG Chipse/Quarry dust from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (Footings )

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (For Tie BEAM / PLINTH BEAM)

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (for COLUMNS)

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work,Inluding centering, shuttering cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (For Roof Beam)

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work,including centering, shuttering cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer. (For SUNSHADE 0.60m. WIDE 100mm THICK @ FIXED END AND 0.50M Free End)

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (for Lintels)

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering, cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer (Slab 125mm thick)

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work in all floors (APSS No. 126). etc., complete as per ss and as directed by the site engineer.

PCC grade M20 (MORD) Providing Plain Cement Concrete Nominal Mix (1:2:4) using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. for Approaches etc. (for Mechanical Mixer)

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade) Cement component not less than 400Kgs / cum, coarse and fine aggregates conforming to IS:383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

Providing Brick Masonry in CM (1:5) with Bricks with traditional size 23 x 11 x 7 cms 2nd class etc. complete Including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials,conveyance charges of materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., excluding seigniorage charges on all materials. Complete for finished item of work as per ss and as directed by the site engineer.

Providing Plastering with CM (1:4), 12mm thick single coat in CM including cost and conveyance of all materials like cement, sand, water etc. to site excluding seigniorage charges on all materials, Including all operational, incidential charges on materials and cost of all labour charges for mixing motor, finishing, curing as directed by engineer-in-charge etc. complete for finished item of work (SS 901, 903 & 904)

Providing Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., excluding seigniorage charges, complete for finished item of work, including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Providing skirting to internal walls to 15cm height with vitrified tiles 8mm thick of 1st quality normal colour, length equal to flooring tiles, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spreading @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand, water etc. excluding seigniorage charges on all materials,complete for finished item of work.including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Exterior walls are painted with one coat of primer and 2 coats of exterior emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911 for external walls

Providing & Fixing of Scientific Doorswith metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with ZincPhosphate Primer to receive any paint on site or finished with ThermosettingPolyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete forfinished item of work for Single leaf Door

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm).

Supply, Delivery & Fixing of MS Gates., as directed by Engineer-in-charge of the work, the rate includes fabrication, transportation, erection & fixing at work site and painting with red oxide coat etc., and overheads & contractors profit complete for finished item of work .

Painting with Synthetic Enamel paints in all shades Grade - II having VOC (Volatile Organic Compound ) content less than 50 grams/ liter. - Two Coat - for New Iron Work as directed by the Departmental Officer-in-charge of the work.

Supply and fixing post of 50x50x5mm thick M.S Angle for Vertical post of 3.00m long each fixing at a distance of 2.50m center to center, pit of 0.3x0.3x0.60m size in all soils, for pedestal of 0.3x0.3x0.60m size with the 50mm x 50mm M.S. angle section embedding in the VCC (1:3:6) for 0.60m depth with clear exposed of 2.40m above bed level and M.S flat length of 2.50meters of size 50x5mm thick along the GI Sheets at top and bottom sides with welded for fixing with G.I Sheet of required welding in the M.S angle section including cost of all materials to site taxes and fixing labor charges etc., for complete the work.

Supply, Delivery & Commissioning of the weigh bridge of the 10MT capacity, PL size 12 ft x 6 ft,Pitless type with the following specifications that includes the cost,fabrication, transportation, commissioning at work site.,excludes the civil work for commissioning complete for finished item of work as directed by Engineer-in-charge 1. STEEL STRUCTURE with 6 load cells , MAIN BEAMS : ISMB 200 mm CROSS BEAMS : JISMB 200MM , PLATE :10mm -SAIL 2.Double Ended Shear Beam Load Cell, Specifications: Rated capacity: 10MT Full scale output (MVN) : 2/3.00, Non-Linearity (FSO): +/-0.020%, Creep (FSO) in 30 min: +/- 0,020%, Zero return (FSO) : +/- 0.002% Safe overload (FSO): 150% 3.ONLINE UPS, Operates between 80volts to 300volts, SMPS Modem, Inbuilt battery charger card, BATTERY FOR BACK-UP 12Volts 60AH :MAKE:EXIDE/AMARON 4.Microprocessor based electronic weight indictor with memory Modular Form • Centronics parallel printer Real time clock, with in-built lithium battery provide 10 year data retention . 128 kb non volatile memory with in-built lithium battery to provide data retention. Software calendar to display day of the week, date, month, year hours, minutes & seconds with alarm for every hour. A 20 character dual line Alphanumeric LCD display for user interaction Windows / IBM compatible AT key board. RS 232 C ouput for computer interface . Output to remote jumbo display. SMS Alerts Memory to store 2000 transactions Real time clock and date display Bright LED Display Operates on 12V DC 5.WEITRANS ONLINE SYSTEM that automatically sends all the weighment details in the web server through GPRS. For this a GSM modem GPRS enabled Modem Sim to view the weighment details through web server where reports can be downloaded in excel sheet including the TVSE Make 80 Col dot matrix printer

Supply, Delivery & Installation of the PTZ Cameras Samsung(Hanwah) IP BASED CCTV SYSTEM as directed by Engineer-in-charge of the work, the rate including all the charges of material, transportation, installation and commissioning at work site connecting to the command control unit, uplink connection., complete for finished item of work .

1. PTZ Camera Model No:QNP 6320R Make:Hanwah ( 6 Nos 2 Megapixel 4.44~142.6mm (32x) lens Day & Night (ICR), WDR, DIS (Built-in gyro sensor) IP66, IK10, NEMA4X Intelligent Analytics )

2. Network Video Recorder Model No:LRN-1610S Make: Hanwah (1No 16Ch 5MP Network Video Recorder with 4 TB Hard Disk)

3. 2Nos 8 Port Switch 10/100/1000

4. 1No Display Sony/Samsung 46" LED Display

5. Necessary CAT-6 Cable, Power Cables Conduited and Connectors

installation charges

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks etc., complete as per ss and as directed by the department authorities.

Supply and Transportation of 1.00 HP(25x25mm) Single phase Mono block CI body motor pumpset confirms to IS 9079:2002 Makes : Kirloskar / Crompton / Texmo / CRI / KSB/Lubi / Havells Hi-flow V2 / PSG/AryenVarsha/Falcon. MAT03703

Placing of the Mono block CI body motor pumpset with Cover over and connecting to the Sintex tank for water distribution and fixing with all the necessary fittings, valves, pipelines etc complete as directed by the engineer-in-charge of work

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) - 15.90 MM OD PIPES SDR 13.5, MAT-02312, BMW-I,220

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) - 22.20 MM OD PIPES SDR 13.5 MAT-02313, BMW-I,221

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) - 28.60 MM OD PIPES SDR 13.5, MAT-02314, BMW-I,222

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) - 34.90 MM OD PIPES SDR 13.5 MAT-02315, BMW-I,223

SUPPLYING AND FIXING 25 MM DIA PPR STAND BALL VALVE CONFIRMING TO DIN STANDARDS 8077/8092, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.MAT-02496, BMW-I,404

SUPPLYING AND FIXING 32 MM DIA PPR BALL VALVE CONFIRMING TO DIN STANDARDS 8077/8092, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK. MAT-02497, BMW-I,405

SUPPLYING AND FIXING C.P Short body bib cock fancy type deluxeheavy duty 12.7 mm dia Indian make of approved Brands/ Manufacturers/ Suppliers) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE AND LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK MAT-01821, BMW-E,82

SUPPLYING AND FIXING CP Long body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian make of approved Brands/ Manufacturers/ Suppliers) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK.MAT-01820, BMW-E,21