Municipal Corporation Tender

Manufacture, supply and delivery of H.D.P.E Pipes conforming to IS 4984-1995 including transportation to any where in A.P excluding Taxes. (Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M) (P.H Items, P.71)

110mm Dia HDPE 6 Kg/Sqm

Manufacture, supply and delivery of H.D.P.E Fittings conforming to IS 4984-1995 including transportation to any where in A.P excluding Taxes.

Pipe Ends Long Neck (Collars) 100mm

M.S Flanges 110

Tee 110

Dummy plates

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including transportation but excluding Taxes. (P.H Items, P.98)

100mm dia Sluice valves

Manufacture as per BIS:12820/89 with S.B.R Quality Rubber confirming to BIS: 5382/85, supply and delivery of Rubber Gaskets suitable for C.I/ D.I S/S pipes anywhere in A.P. F.O.R. Destination departmental stores including cost of material, loading, incidental handling with companies standard packing, transportation, unloading & stacking but excluding Taxes. (P.H Items, P.78)

Earthwork excavation in Ordinary soil by Mechanical Means upto 3 m depth for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(B)) - 1 Cum

Filling of Stone Crusher Dust for foundation trenches including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Laying and jointing of H.D.P.E Pipes by butt fusion welding as per IS:7634–part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure - 1 Rmt (Public Health Items, P.5)

(a) 110 mm HDPE Pipeline

Labour charges for lowering and keeping in position of D.I. Sluice valves(with cap/with hand wheel), reflux valves and scour valves. Unit each

Supply and delivery of Bolts and Nuts with double washers including taxes and conveyance etc., complete. (1/2 " to 1 ")

For fixing of CID joints

Laying of Plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 / 53 grade at cement as per Clause 1501.2.2 (M30 Grade) at 400 kg per cum, coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.28 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, near approaches to bridge / culvert and construction joints, and curing of concrete slabs for 14- days and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

Carting away the surplus excavated earth from the work site with a lead of 1 km beyond initial lead including loading, unloading and conveyance but excluding stacking charges etc., complete - 1 Cum.

House service connections (PP Saddle)PP Clamp saddles-PP clamp Saddles shall be manufactured by injection moulding using virgin polypropylene. Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour&Flavour of water ii) Appearance of water iii) Growth of Micro Organism iv) Extraction of Substances that may be of concern to public health (Cyto toxicity) v) Extraction of Metals excluding all taxes

(Main pipe outer diameter in mm & tapping size in inches) 110 X 1/2"

The Ferrule of pressure rating PN 10 and shall comply with IS 2692:1989. The cost shall include testing of all materials, labor, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking and fixing etc, complete as specified and directed by the departmental Engineer in charge, but excluding all taxes. 1/2 Inch

S& F 15 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete

GI Fittings and pipe in pit

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.)

20 mm OD

Engaging of Fitter for giving HSC Connections

Fitter Class-1

Provision for Seignorage charges

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.749 %

Unforeseen item