Municipal Corporation Tender

Engaging of Air Compressor with drilling machine including all hire charges, fuel charges and crew charges, labour charges etc. complete as per S.S. and as directed by the site engineer.

Earth work for Ordinary Soil excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484.

Carting away of excavated earth / debries to a lead of 2KM (the rate including conveyance charges, labour charges for loading, unloading charges) including ideal hire charges of truck etc. complete as directed by the Departmental Authorities of the work.

Providing Sand Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH Including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

Providing Plain Cement Concrete (1:3:6) mix, Grade M10 ( Cement :Fine Aggregate: Corse aggregate) using coarse aggregate 20mm size hard machine crushed granite metal from approved quarry including cost and conveyance of all materials and all labour charges fo machine mixing ,laying, Concrete, ramming in 15cm layers finishing top surface to the required level curing for 14 days etc. complete for finished item of work as per S.S and as directed by the Departmental Authorities (with out Form work).

Providing Plain Cement Concrete (1:3:6) mix, Grade M10 ( Cement :Fine Aggregate: Corse aggregate) using coarse aggregate 20mm size hard machine crushed granite metal from approved quarry including cost and conveyance of all materials and all labour charges fo machine mixing ,laying, Concrete, ramming in 15cm layers finishing top surface to the required level curing for 14 days etc. complete for finished item of work as per S.S and as directed by the Departmental Authorities (with Form work).

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade) Cement component not less than 400Kgs / cum, coarse and fine aggregates conforming to IS:383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

Providing RCC Grade M20 (nominal mix) with minimum Cement of 350 Kgs/ Cum of Concrete using 20mm (60%) and 10mm (40%) size graded machine crushed HBG metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials and all charges for machine mixing laying concrete, ramming in 15cm layers finishing top surface to the required level curing fo 14 days etc. complete for finished item of workas per S.S. and as directed by the Departmental Authorities for Culvert slabs & bed blocks with form work.

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work in all floors (APSS No. 126). etc., complete as per ss and as directed by the site engineer.

Manufacturing, Supply and Delivery of M S Man hole providing fabricated various size including cost and conveyance cutting, welding, floor drilling holes and fixing in position etc., complete as per SS and as directed by the site engineer.

Providing Plastering with CM (1:4), 12mm thick single coat in CM including cost and conveyance of all materials like cement, sand, water etc. to site excluding seigniorage charges on all materials, Including all operational, incidential charges on materials and cost of all labour charges for mixing motor, finishing, curing as directed by engineer-in-charge etc. complete for finished item of work (SS 901, 903 & 904)