Municipal Administration Department Tender

Bus bar

125A 4P, Aluminium bus bar with 25 kA/sec

Three phase energey meter

HRC fuse with base

a) 1 no. of 40A,10KA 4P MCB for DB

b) 1 no. of 20A,10KA DP MCB for External lighting

c) 2 Nos. of 32A TPN MCB with 1set RYB indicating LED lamps with DOL starter with NO/NC for remote control operation including SPP, OLR, Terminal block, Auto Manual selector switch and ON/OFF/ Trip indication lamps for Pump 3.5Kw

1 no. of 32A,10KA 4P MCB for Spare

Supply and transportation of ...45 W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's having System efficacy 95 lm/W and junction temprature 70°C, with Ingrees protection IP65, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection ≥ 5KV with optics distribution , THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete a) LUMINAIRE MAKE : WIPRO / PHILIPS (GREEN LINE) / Lighting Technologies(Adornis) / SCHREDER (BRIKA) / GE / CROMPTON (HAWK) / BAJAJ (EDGE+) / HALONIX (LUMOS - SUPER) / HAVELLS (ENDURA CITYLINER NEO) /Capart(Premium) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG

7 W LED lamp fitting into normal holder with holder (ELEC-3.7.5 d )

Supply and fixing of 20W,2000 lumens T8, , not less than 1100 mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF0.9, Surge protection: 2KV,THD10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI70, .etc., complete. as per IS 10322 (Part 5/ Sec 1)..2012 Makes : As per list of recommended brands as category I.

Recess mounted Ceiling 27W LED Lighting Fixture Make- Wipro CRDL 11S033HP57 - 27W (ELEC-3.9.4G)

Supply and Laying of 3 runs of 1.5Sqmm copper flexible multi stranded wires FR type in already laid conduit in ceiling or walls with all required lugs and connectors

Supply and Laying of 3 runs of 4.0Sqmm with copper flexible multi stranded wires FR type in already laid conduit in ceiling or walls with all required lugs and connectors

Supply and Laying of 3 runs of 2.5Sqmm with copper flexible multi stranded wires FR type in already laid conduit in ceiling or walls with all required lugs and connectors

Supply and Laying of 4 runs of 6.0 Sqmm & 1 run 2.5 with copper flexible multi stranded wires FR type in already laid conduit in ceiling or walls with all required lugs and connectors

Supply and Laying of 3C x 6.0Sqmm copper armoured FR cable with excavation & with all required lugs and outdoor connectors

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Double C.P. Pillar cock

Labour charges only for fixing Indian makeFlat Back Wash Hand Basin with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting Pillar Taps complete with standard CI brackets including wooden block

S&F 12.7 mm N.P bib tap Indian make heavy dutys Long body including labour chargers.

Supply of 75mm x 10.3mm PN 16/PPR Pipe conforming to DIN Standards 8077/8082 conforming to IS15801 and Supply of 110mm x 15.1mm PN 16/PPR Pipe conforming to DIN Standards 8077/8084 conforming to IS15801 including fittings (plain or door) tees, bends, collars, crosses, reducers etc. of approved make including erecting necessary temporary scaffolding and make good the walls, making connection with sanitary fittings and etc. complete including testing of pipelines as per spec.

a) 75 mm OD (BMW-I.247)

b) 110 mm OD (BMW-I.249)

Providing and fixing unplasticized PVC - 6 kg/sqcm waste pipes embedded in walls / floors conforming to IS 4985 : 2000 of approved make including necessary fittings like bends, tees, Y, etc, of approved make including cutting and making good masonry or concrete walls and floors wherever necessary , making connection with sanitary fittings, jointing with solvent cement for pipes including all necessary works for concealing the pipes in walls, floors etc.,including testing, all complete as per specifications and as directed by the Engineer.

a) 40mm nominal bore

b) 50mm nominal bore

Providing and fixing multiway PVC floor trap of approved make including jointing, cutting, making good the walls, floors, all complete as per specifications.

75MM DIA

Providing and fixing P trap of approved make including jointing, cutting, making good the walls, floors, all complete as per specifications.

75mm Dia

Providing and fixing CP gratings with Cockroach trap with frame and cover of specified make making good the same etc. complete as per specification.

a) 125mm X125mm

Heavy duty PVC waste pipe for wash basin, sink as directed by the departmental incharge of work.

2 inch CPVC valve

1 inch CPVC valve

FTA 75mm

MTA 75mm

Sockets 75mm

elbow

Food Menu Signages: Providing and Fixing in position 1.5mil Ecosolvent print with matt lamination of profix/sunfix make or equivalent of 1.25m width abd 1.2m height.

Designing, Supply, fabricate and erection of aluminium semi unitized system. The aluminium semi unitized glazing, systems is designed to the structural requirement as per IS. Aluminium extrusions of 131x67x2mm (with a flange of 31mm), transom of the Structural Glazing System, Sub frame dimensions 37x26.8x 1.4mm(The all aluminium selections will be powder coated colour one as your choice) Glass will be bonded with the panel frames by means of structural silicone bonding wherever required using the appropirate sealants, i.e. G.E.SILICONE or DOW CORING INTERNATIONAL. Sheet metal screws for bracket joining, wooden screws for erecting of frame & anchors fasteners for fixing of the wall/slab with necessary brackets. PANEL SIZE WILL BE 1200MMX3030 MM (As per drawing). High pressure laminated sheet is a flat panel based on thermosetting resin homogeneously reinforced with wood based fiber and manfactured under high pressure and at high tempratures. The sheet Cladding comprises of 6mm thick flat panel to backup frame work comprising of 75mmx25mmx1.5mm, 50mmx25mmx1.5mm powder coated to a required shade aluminium 'BOX' Pipe enclosed to the walls using anchor bolts. All panels will be fixed with VHB tapes Or colour Rivets to aluminium backup frame. The system will be open joint system & there will be 8mm to 10mm open spacing between the each.

Flooring with high polished jet black granite slabs 18 mm thick over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tilesetc., complete, including seigniorage charges, labour charges for dressing of tilesetc., complete for finished item of work,

Providing letters (ANNA CANTEEN) in telugu showing clearly as per directions of departmental authorities

Supply,delivery and fixing of 1000L Aquasafe stainless steel water tank with tap for drinking water as directed by departmental incharge of the work.

Provision for internet connection

Providing Partiation with GI sheet at required places near toilets as directed by the departmental incharge of the work.

Repairs to weighing machine and UPS, batteries as directed by the departmental incharge of the work

Supply and fixing of 4 feet dia RCC rings for construction of septic tank as directed by the departmental incharge of the work.

Supply,delivwry and fixing of leaders photos inside of anna canteen as directed by the departmental incharge of the work.

Assistant Executive Engineer

Nandigama Municipality