Municipal Administration Department Tender

PCC ( 1:4:8) for foundation using 40mm HBG metal SS5 from approved quarry including cost and conveyance and seigniorage charges of all materials and all labour charges etc., complete for finished item of work ( APSS No : 402 ).

Vibrated Plain Cement Concrete M20 grade nominal mix for plain concrete in open foundations using 20mm Graded HBG aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates, including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing for 14- days, and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. RBR-CCPV-5

Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive streangth not lessthan 50 kg/sqm for walls for Superstructure Walls. BLD-CSTN-6-18

Supply and fixing of refractory fire bricks size 300 x 150 x 100 mm including cost of coveyance of all materials, labor charges etc., Complete as directed by the department engineering in charge of the work.

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering.

For columns footings

For pedastals 2nd footing

for main columns,ventilators above 1st floor

for plinth beam alround

for roof beams

for roof slab 125mm thick

for ventilator slab 100mm thick

Providing high yield strength deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work (APSS No.126) in all floors. but excluding VAT & Seignorage charges including over head charges and contractor Profit and but excluding VAT & Seignorage charges

Plastering with cement mortor (1:3) -12 mm thick including cost siegniorage and conveyance to site and all labour charges for all operational charges etc complete in Ground floor

Ceramic tiles (300*300*12) for flooring Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

White washing three coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials

Manufacturing, supply, delivery and fixing of RCC benches (Heavy) of approved Design including cost of fixing with necessary foundation bolts & Concrete and enamel painting of two coats over one coat of white wahs including transporation charges complete as directed by the dept engineering incharge of the work