Municipal Administration Department Tender

For vertical members- 50mm x 50mm x 2.6mm @3.74kg/m

For Horizontal members -40mm x 20mm x 1.6mm@1.44kg/m

RCC M- 20 Design mix (Cement 370 kgs fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering. (Page No.664)

for piles around sump

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) bars (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work. (as per amendment in 2011-12 SSR)

Supply & fixing pre-painted galvalium trepizoidal profile roofing sheets with 0.50mm thickness,coating Alu-zinc coating AZ 150 GSM. Tensile strength : 550 MPA,paint coating : Regular modified polyster painting. Thickness (top) 18-20 microns,(bottom) 5-7microns including C/C of all materials like sheets, J bolts, bitumen washers etc. with or wothout ridge with sales & all other taxes & all labour charges etc. complete for fixing sheets in position.

for SUMP

Painting to Anti corrosive paint including cost and conveyance of all material and labour charges etc., BLD -CSTN-10-12V & BLD-CSTN-10-7

main sections

distribution sections sections

Spply and fixing of chain link mesh of sixe 76mmX76mm-8 Gauge.position line, cutting, welding, grinding etc., complete for finished item of work

NAC @ 0.10%

Add Seiginorage charges

Sub Total

Provision for Taxes @18%

Provision for APPMS @ 0.15 %

Unforeseen item

Sub Total

Provision for Scrutiny charges@ 3.00 %

Provision for User charges@ 1.00 %

Assistant Engineer,

Akividu Nagara Panchayt