Municipal Administration Department Tender

(C) above 150.00 m up to 250.00 m depth

Supply & Fixing of 180 mm dia PVC Casing Pipe including cost and conveyance of all materials and labour charges etc. complete as directedcted by the Engineer in charge of the work.

Supply & Fixing of 180 mm dia PVC Bore Cap per 1No

Supply and delivery of 75/65 mm UPVC pipe with standing upto 20 Kgs / CM2 upto 200 Mts for submersible motors with both ends square threaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs weights. Makes: As per list of recommended brands.

Supply and Transportation of 7.5 HP, 12-16 Stage ,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes:Kirloskar / Crompton /Texmo/CRIKSB/Lubi/PSG/AryenVarsha/Falcon.

Supply of WPTC (Weather Proof Twin Core) 6 Sqmm ISI Alluminium Wire.Makes: Gold Medal / Million / GM / Vimal / Finecab / Nakoda / Plaza/ Payal / Sudhakar/ Rajnigandha/ Airson/Orbit/ollvin/Beljin ( Service Main)

Supply of 3 Core 4 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/Gloster

Fabrication ,transportation and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. 1.Voltmeter ; 0-500 V 96x96mm size. Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab - 1No 2.0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size). Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab- 1No. 3.Single phase preventor of suitable range Makes: L&T / Minilec / Powertec. - 1No. 4.32 A TP, 10KA MCB. Makes: Legrand / Schneider / - 1No 5.Indication lamps (R-Y-B) with switch control - 1set 6.Voltmeter & Ammeter selector switch - 2 Nos 7. Supply and fixing of ISI Mark suitable capacitor Makes: L&T / Siemens / Schneider / Epcos /Havells. Upto 7.5 HP with DOL Starter of Make C&S/Crompton / L&T / Siemens/BCH

Geological Survey Charges

Erection of New Submersible Motor Pumpset including its fittings & labour charges complete.(Quotation)

Supply, and delivery of MS Clamp Sets including bolts and nuts including of all charges etc.,complete.

Supply, delivery and fixing of the Bore well materials including cost and conveyance of all materials charges and labour charges etc complete.2" Bore Cover Plate

Supplying & fixing Gunmetal (GM) Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 50 mm NB Size including labour charges each complete.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, removal of stumps and other deleterious material and disposal upto a lead of 50 m, etc complete for pipe line trenches & building foundations where depth is less than 1.50 times the width (RBR-FNDN-1) Mechanical Means

Manufacturing and Supply and delivery of Unplasticised PVCs pipes for potable water supplies conforming ti IS:4985/2000(third revision) with bell ends (socket) as per specification in light Grey/Natural Lvory Grey/Any other Color (except White) inclusive of transporation to the sub -divisional stores anywhere in AP including Excise duty and Sales Tax etc. 110 mm Dia 6Kg/ Cm2

Supply and filling with sand from approved quarry including cost and conveyaance, watering, tamping including all labour charges

Lowering, laying, jointing and testing to hydralic test pressure including cost of water with minimum water lead of 500m for UPVC pressure pipes in ready made trenches true to alignment and gradient including all sundries but excluding cost & conveyance of pipes from source of supply and jointing materials as per BIS No. 7634 - Part III - 1975. 110 mm Dia 6Kg/ Cm2

Supply and delivery of 110 mm double Tee - UPVC/SWR Pipe fittings. (BMW-G-75)

Supply and delivery of 110 mm Cupling- UPVC/SWR Pipe fittings.(BMW-G- 93)

Supply and delivery of 110 mm single Tee - UPVC/SWR Pipe fittings. (BMW-G- 69)

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Bodyand Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 gradeEPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on theShaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 withPocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. For 100mm Sluice valve (PN 1.6 MPa)

Total

1. Add GST @ 18%

2.seignoarge

2.NAC @0.1%

Note : The contractor should engage Technical personel during execution of work failing which necessary amount will be deducted from the contractor bill. The labour cess @1% shall be deducted from the contractor's bill without adding to the workdone as per the Government orders. The 3rd party QC charges shall be deducted from contractor bill from out of over head charges loaded in data.