Municipal Administration And Urban Development Department Tender

To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.

Municipal Administration And Urban Development Department Tender

Works

Eprocure

Rajahmundry, Andhra Pradesh

Opening Date24 Dec 2018

Closing Date26 Jan 2019

Tender AmountRefer Documents

Email

Download

Costs

EMD
₹ 55,03,500
Document Cost
Refer Documents
Tender Fee
Refer Documents

Summary

Asian Infrastructure Investment Bank (aiib) - Andhra Pradesh Urban Water Supply Septage Management Improvement Project Apuwssmip

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
2018_MAUD_422451_1
Bid Award Id
View
Tender No
236R/AIIB/EAST/2018/TS-JTO.4, Dt.20.12.2018
Tender Authority
Municipal Administration And Urban Development Department View
Purchaser Address
-
Website
http://http://www.appublichealth.gov.in/

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Tender Notice-33.0 MBTendernotice_1.pdf

NIT

Tender Notice-2254.2 kBNITEAST.pdf

NIT

Tender Notice-1208.0 kB8 mld wtp Yeleswar...8 mld wtp Yeleswaram & Recycling unit.pdf

BOQ-12.0 MBBOQ_442785.xls

BOQ

Corrigendum-3AIIBEastCorrigendu...AIIBEastCorrigendum.pdf

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.

Quantity1970

Rate-

Amount -

Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.

Quantity550

Rate-

Amount -

Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.

Quantity2740

Rate-

Amount -

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trench unit 1.00 cum RBR-FNDN-1 I-A (Manual means 30%)

Quantity15300

Rate-

Amount -

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts,pipeline trenches upto 3.00m depth RBR-FNDN-1 I-B (Mechanical Means Upto 3 m depth 70%)

Quantity35700

Rate-

Amount -

Providing bedding with sand for pipelines trencehs as per specification and drawing including cost and conveyance of materials to site with all leads, lifts including watering, tamping, ramming, labour charges, all other incidental and operational charges etc., complete as per detailed specification and directed by the Engineer - in - Charge

Quantity3920

Rate-

Amount -

Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S

Quantity-

Rate-

Amount -

110mm dia.

Quantity18512

Rate-

Amount -

160mm dia.

Quantity11773

Rate-

Amount -

200mm dia.

Quantity10976

Rate-

Amount -

250mm dia.

Quantity7529

Rate-

Amount -

315 mm dia.

Quantity4265

Rate-

Amount -

355 mm dia.

Quantity650

Rate-

Amount -

Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete

Quantity-

Rate-

Amount -

110mm dia.

Quantity18512

Rate-

Amount -

160mm dia.

Quantity11773

Rate-

Amount -

200mm dia.

Quantity10976

Rate-

Amount -

250mm dia.

Quantity7529

Rate-

Amount -

315 mm dia.

Quantity4265

Rate-

Amount -

355 mm dia.

Quantity650

Rate-

Amount -

Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete

Quantity-

Rate-

Amount -

TEES

Quantity-

Rate-

Amount -

110mm dia.

Quantity75

Rate-

Amount -

160mm dia.

Quantity47

Rate-

Amount -

200mm dia.

Quantity43

Rate-

Amount -

250mm dia.

Quantity31

Rate-

Amount -

315 mm dia.

Quantity20

Rate-

Amount -

355 mm dia

Quantity3

Rate-

Amount -

BENDS

Quantity-

Rate-

Amount -

110mm dia.

Quantity38

Rate-

Amount -

160mm dia.

Quantity24

Rate-

Amount -

200mm dia.

Quantity22

Rate-

Amount -

250mm dia.

Quantity15

Rate-

Amount -

315 mm dia.

Quantity12

Rate-

Amount -

355 mm dia

Quantity1

Rate-

Amount -

END CAPS

Quantity-

Rate-

Amount -

110mm dia.

Quantity10

Rate-

Amount -

160mm dia.

Quantity7

Rate-

Amount -

200mm dia.

Quantity5

Rate-

Amount -

REDUCERS

Quantity-

Rate-

Amount -

OD 110mm x 125mm

Quantity47

Rate-

Amount -

OD 125mm x 140mm

Quantity47

Rate-

Amount -

OD 140mm x 160mm

Quantity47

Rate-

Amount -

OD 160mm x 180mm

Quantity45

Rate-

Amount -

OD 180mm x 200mm

Quantity45

Rate-

Amount -

OD 200mm x 225mm

Quantity31

Rate-

Amount -

OD 225mm x 250mm

Quantity28

Rate-

Amount -

250x280 mm dia

Quantity28

Rate-

Amount -

280x315 mm dia

Quantity28

Rate-

Amount -

315x355 mm dia

Quantity4

Rate-

Amount -

a) Pipe ends - long neck

Quantity-

Rate-

Amount -

110mm dia.

Quantity62

Rate-

Amount -

160mm dia.

Quantity40

Rate-

Amount -

160 mm dia for Air TEEs

Quantity40

Rate-

Amount -

200mm dia.

Quantity36

Rate-

Amount -

200 mm dia for Air TEEs

Quantity36

Rate-

Amount -

250mm dia.

Quantity38

Rate-

Amount -

250 mm dia for Air TEEs

Quantity26

Rate-

Amount -

315 mm dia.

Quantity34

Rate-

Amount -

315 mm dia for Air TEEs

Quantity24

Rate-

Amount -

315 mm dia for bulk flow meter

Quantity6

Rate-

Amount -

355 mm dia

Quantity2

Rate-

Amount -

355 mm dia for Air TEEs

Quantity4

Rate-

Amount -

355 mm dia for bulk flow meter

Quantity4

Rate-

Amount -

b) MS Flanges

Quantity-

Rate-

Amount -

110mm dia.

Quantity62

Rate-

Amount -

160mm dia.

Quantity40

Rate-

Amount -

160 mm dia for Air TEEs

Quantity40

Rate-

Amount -

200mm dia.

Quantity36

Rate-

Amount -

200 mm dia for Air TEEs

Quantity36

Rate-

Amount -

250mm dia.

Quantity38

Rate-

Amount -

250 mm dia for Air TEEs

Quantity26

Rate-

Amount -

315 mm dia.

Quantity34

Rate-

Amount -

315 mm dia for Air TEEs

Quantity24

Rate-

Amount -

315 mm dia for bulk flow meter

Quantity6

Rate-

Amount -

355 mm dia

Quantity2

Rate-

Amount -

355 mm dia for Air TEEs

Quantity4

Rate-

Amount -

355 mm dia for bulk flow meter

Quantity4

Rate-

Amount -

Supply and delivery of DI Pipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 excluding GST and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities.

Quantity-

Rate-

Amount -

DIDF pipes for scours

Quantity-

Rate-

Amount -

100X2.00m on 110 dia mains for scours

Quantity10

Rate-

Amount -

100X2.00m on 160 dia mains for scours

Quantity6

Rate-

Amount -

100x1.00m long DF pipes for sluice valves

Quantity62

Rate-

Amount -

150X2.00m on 200 mm dia mains for scours

Quantity8

Rate-

Amount -

150X2.00m on 250 mm dia mains for scours

Quantity2

Rate-

Amount -

150x1.00m long DF pipes for sluice valves

Quantity40

Rate-

Amount -

200x1.00m long DF pipes for sluice valves

Quantity36

Rate-

Amount -

250x1.00m long DF pipes for sluice valves

Quantity38

Rate-

Amount -

300x1.00m long DF pipes for sluice valves

Quantity34

Rate-

Amount -

300x1.00m long DF pipes for bulk flow meter

Quantity6

Rate-

Amount -

350x1.00m long DF pipes for sluice valves

Quantity2

Rate-

Amount -

350x1.00m long DF pipes for bulk flow meter

Quantity4

Rate-

Amount -

OTHER DI FITTINGS

Quantity4100

Rate-

Amount -

Supply and delivery of PN 1.6 "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including cost and conveyance and as per Technical Specification

Quantity-

Rate-

Amount -

100 mm distrubution

Quantity31

Rate-

Amount -

150mm dia for distrubution

Quantity20

Rate-

Amount -

200mm dia for distrubution

Quantity18

Rate-

Amount -

250mm dia for distrubution

Quantity19

Rate-

Amount -

300mm dia for distrubution

Quantity17

Rate-

Amount -

350mm dia for distrubution

Quantity2

Rate-

Amount -

for scour

Quantity-

Rate-

Amount -

100mm dia on 110 mm dia mains

Quantity5

Rate-

Amount -

100mm dia on 160 mm dia mains

Quantity3

Rate-

Amount -

150 mm dia on 200 mm dia lines

Quantity4

Rate-

Amount -

150 mm dia on 250 mm dia lines

Quantity1

Rate-

Amount -

Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16

Quantity-

Rate-

Amount -

80mm dia 355 mm pipe

Quantity65

Rate-

Amount -

labour charges for Lowering, keeping in position and fixing DI sluice valves (with cap / with hand wheel & reflex valves) including all labor charges and incidental charges and as per Technical Specification

Quantity-

Rate-

Amount -

for sluice

Quantity-

Rate-

Amount -

100 mm distrubution

Quantity31

Rate-

Amount -

150mm dia for distrubution

Quantity20

Rate-

Amount -

200mm dia for distrubution

Quantity18

Rate-

Amount -

250mm dia for distrubution

Quantity19

Rate-

Amount -

300mm dia for distrubution

Quantity17

Rate-

Amount -

300 mm dia for bulk flow meter

Quantity3

Rate-

Amount -

350mm dia for distrubution

Quantity2

Rate-

Amount -

350mm dia for bulk flow meter

Quantity1

Rate-

Amount -

for scour

Quantity-

Rate-

Amount -

100mm dia on 110 mm dia mains

Quantity5

Rate-

Amount -

100mm dia on 160 mm dia mains

Quantity3

Rate-

Amount -

150 mm dia on 200 mm dia lines

Quantity4

Rate-

Amount -

150 mm dia on 250 mm dia lines

Quantity1

Rate-

Amount -

Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.

Quantity-

Rate-

Amount -

80 mm dia on 150,250,315,355 mm pipes

Quantity65

Rate-

Amount -

Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.

Quantity-

Rate-

Amount -

DIDF pipes for scours

Quantity-

Rate-

Amount -

100 mm

Quantity102

Rate-

Amount -

150 mm dia

Quantity85

Rate-

Amount -

200 mm dia

Quantity54

Rate-

Amount -

250 mm dia

Quantity51

Rate-

Amount -

300 mm dia

Quantity52

Rate-

Amount -

350 mm dia

Quantity8

Rate-

Amount -

Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete and as per Technical Specification

Quantity-

Rate-

Amount -

80 mm dia

Quantity65

Rate-

Amount -

100 mm dia

Quantity176

Rate-

Amount -

150 mm dia

Quantity201

Rate-

Amount -

200 mm dia

Quantity144

Rate-

Amount -

250 mm dia

Quantity136

Rate-

Amount -

300 mm dia

Quantity124

Rate-

Amount -

350 mm dia

Quantity22

Rate-

Amount -

Construction of sluice and scour Valve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work

Quantity-

Rate-

Amount -

for sluice

Quantity-

Rate-

Amount -

100 mm distrubution

Quantity31

Rate-

Amount -

150mm dia for distrubution

Quantity20

Rate-

Amount -

200mm dia for distrubution

Quantity18

Rate-

Amount -

250mm dia for distrubution

Quantity19

Rate-

Amount -

300mm dia for distrubution

Quantity17

Rate-

Amount -

300mm dia for bulk flow meter

Quantity3

Rate-

Amount -

350mm dia for distrubution

Quantity2

Rate-

Amount -

350mm dia for bulk flow meter

Quantity1

Rate-

Amount -

for scour

Quantity-

Rate-

Amount -

100mm dia on 110 mm dia mains

Quantity5

Rate-

Amount -

100mm dia on 160 mm dia mains

Quantity3

Rate-

Amount -

150 mm dia on 200 mm dia lines

Quantity4

Rate-

Amount -

150 mm dia on 250 mm dia lines

Quantity1

Rate-

Amount -

Construction of Air Valve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work

Quantity-

Rate-

Amount -

80 mm dia on 160 mm pipe

Quantity20

Rate-

Amount -

80 mm dia on 200 mm pipe

Quantity18

Rate-

Amount -

80mm dia 250 mm pipe

Quantity13

Rate-

Amount -

80mm dia 315 mm pipe

Quantity12

Rate-

Amount -

80mm dia 355 mm pipe

Quantity2

Rate-

Amount -

Road Restoration

Quantity-

Rate-

Amount -

Filling crushur stone dust in pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Quantity7700

Rate-

Amount -

Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine Crushed Graded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. for BT&CC roads

Quantity806

Rate-

Amount -

supply,delivery of Pressure regulating valves

Quantity6

Rate-

Amount -

Bill No: 3.2 Providing House Service Connections (shifing of existing HSCs and providing new HSCs)

Quantity-

Rate-

Amount -

Providing House service connections on HDPE mains a) 1 No.of MDPE PE 80 blue/PE100 black Electro Fusion Tapping Saddle (Flexifit-Top loading type with load bearing capacity of 1500N) Electro Fusion Tapping Saddle shall comply with BS EN 12201-3:2011, PN-12.5/PN-16 Rating and manufactured from virgin resin of PE-80/PE-100 having blue/black colour. Raw material must be WRAS Approved as per BS 6920 for effect on water quality intended for human consumption. b) 1 No. of regulating brass ferrule as per IS 2692 c) 2 No. of compression adaptor with one side compression end to suit ½” (20mm OD )MDPE pipe and other side with female threaded off-take with SS-304 material inserts of sizes ½” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16. d) 2 No. of Double compression elbow to suit ½” (20mm OD )MDPE pipe, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16. e)MDPE PE80 Blue Pipe of specified length as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of ½” (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced. f) CP bibcock g) Geotagging of the HSC h) drilling of hoe in RCC / RR in compound wall i) holder clamps where ever required j) UPVC pipe for drain crossing

Quantity-

Rate-

Amount -

PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD SIDE (Minimum 4.0 Mts MDPE pipe)

Quantity800

Rate-

Amount -

PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD OPPOSITE SIDE IN EARTHEN ROADS (Minimum 7.0 Mts MDPE pipe)

Quantity800

Rate-

Amount -

PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD SIDE IN CC & BT ROADS (Minimum 4.0 Mts MDPE pipe)

Quantity2134

Rate-

Amount -

PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD OPPOSITE SIDE IN CC &BT ROADS (Minimum 7.0 Mts MDPE pipe)

Quantity1601

Rate-

Amount -

Bill No: 3 AMR Ultrasonic Meters

Quantity-

Rate-

Amount -

Provide installing and giving Satisfactory field testing of battery Operated "B" Class AMR Ultrasonic Meters having no moving part in Contact with water with magnetically sealed coupled and Hermitically sealed register ,with full brass body confirming to ISO 4064 along with manufacturing test certificate with battery life of min.10 years with GSM /RF Technology for communication to server with PC Software including all materials required for fixing ,labour and giving satisfactory leak proof test etc Complete,General Specifications:-1) Meter should be battery operated with no moving parts,low prtesser ,loss,dry type as per FCRI /MID.2)Display:- 8 digit LCD,3)Encloser :-Protection class IP 68 4) Tempature :-Ambit 50deg .C 5) Pressure :-minimum life of 10 Years 7) Memory built -In and should have storage for at least 12 months with daily /monthly accumulated totailised data with time and date should be available .It should able to access memory of the meter through serial communications 8) End Connection:- Screwed up to 40mm BSP/Npt coupling 9) Installation:- Should be able to install in any orientation 10) Transducre :-Inbuilt as per detailed Technical Specifications . 11) The acceptance /routine test shall be either conducted by M/S.Fliud Control Research In stitute ,Palght,Kerala or any of the Laboratories apporved by the National Accerditation Board for Calibration Laboratories (NABL) or EEC pattern apporaval certificates with at least 5 years battery life, including dual channel data loggers ,fixing specials,installation at site etc.. including providing and fixing in position poly propylene water meter box to accommodate water meter all charges and excluding GST

Quantity5335

Rate-

Amount -

Bill No: 3.4 Supply, deliver and installation of bulk flow meter and other instruments in the deliveries for the DMAs of Mummadivaram Nagara Panchayat

Quantity-

Rate-

Amount -

Electromagnetic Flow Meters

Quantity-

Rate-

Amount -

Supply, delivery, installation and integration of Electromagnetic flow meter with IP68 and as per ISO 9001:2008,meter tube should be SS304 material, CS flanges of PN16 rating liner - hard rubber/polyurethane with WRAS or NSF drinking water approval, electrodes - SS316, 2 measuring electrodes for measuring,1 ground elctrode,1 empty pipe detection, coil housing - SS304 fully welded construction for corrosion grade/painted steel with protective lacquering (corrosive protection, class up to C5-1) as per EN ISO-12944/carbon steel, IP68 protection, Accuracy +/- 0.5% of measured value inclusive of linearity, repeatability etc, grounding rings of SS316/304. Flow transmitter microprocessor based wall mounted, flow ranges of the meter (full flow range). The overall uncertainty of the calibration rig should be atleast three times better than the uncertainty of the full bore electromagnetic flow meter. The competent government authority such as FCRI/NABL must certify the test facility etc. The EMF must be integrated with local SCADA server and the reading shall be captured all times 24x7. The flowmeter values must be persistent and there is no loss of data. The meter shall have display panel for displaying the readings according. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.

Quantity-

Rate-

Amount -

Zone-I DMA ( Mandlabailu (Near Bus Stand) , 700 KL , Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

300 mm

Quantity1

Rate-

Amount -

Zone-II DMA ( Krapu Chinthalapudi , 500 KL , Inlet 350 mm Ø )

Quantity-

Rate-

Amount -

350 mm dia

Quantity1

Rate-

Amount -

Zone-III DMA ( Aganvadi kendram near polamma temple Tillamma cheruvu , 500 KL , Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

300 mm

Quantity1

Rate-

Amount -

Zone-IV DMA ( Somidevarapalem , 700 KL , Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

300 mm

Quantity1

Rate-

Amount -

Pressure Transmitter

Quantity-

Rate-

Amount -

Supply, delivery , installation of pressure transmitter with a pressure range of up to 16 bar and 64 bar for appropriate usages. Output: 4 to 20 mA, permissible temperature: -20°C to +70°C, IP65 rated with local display. For This item shall, including cost, conveyance, etc complete as directed by the departmental officers.

Quantity8

Rate-

Amount -

Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format.

Quantity8

Rate-

Amount -

Construction of CC masonry chambers with a openable MS hatch, with lock and key arrangement, steps arrangement, for Electromagnetic Flow meters, Butterfly valves as per pipe sizes including cost of cement, sand, bricks and other required material, including painting and suitable painting material, including labour charges. , Excavation and including wages. Complete as directed by the departmental officer.

Quantity-

Rate-

Amount -

300 mm

Quantity3

Rate-

Amount -

350 mm dia

Quantity1

Rate-

Amount -

Chlorine Analyzer

Quantity-

Rate-

Amount -

Supply, installation , delivery and testing wall mounted ABS plastic enclosure based Online Chlorine Analyzer of Amphreometric or Potentiometric type. Specifications of Range: 0 to 5 mg/L free or total residual chlorine, Resolution 0.01 PPM, Accuracy: +/- 0.05 PPM or better, Cycle Time: 4 minutes, Inlet: Sample Temperature: 5 to 40 °C, operating Temperature: Range 5 to 60 °C. Local LCD Display to display the values. Output: 4-20 mA or 0-10 VDC to integrate into PLC if needed. PH Compensation must be Auto/Manual. All accessories that are required for the must be provided.This item shall include the cost of consumables for the defect liability period of 2 years.

Quantity1

Rate-

Amount -

Turbidity Analyzer

Quantity-

Rate-

Amount -

Supply, installation , delivery and testing of wall mounted Turbidity Analyzer make of HACH/ ABB/ Forbes Marshall with specifications of Range 0.00-500.0(NTU/FNU), Operating Temperature : 0 – 60 °C, Displayed Resolution : 0.01 (0.00-19.99), 0.1(20.0-500.0)NTU/FNU, Response Time : Initial response in 1 minute, 15 seconds for a full-scale step change Signal, Sample, Temperature : 0 to 50°C (32 to 122°F), Output 4-20mA to integrate into PLC if needed. Local LCD Display to display the values . This item includes the cost of consumables for the defect liability period of 2 years.

Quantity1

Rate-

Amount -

Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format.

Quantity1

Rate-

Amount -

Supply delivery and installation of Protection MS grills with lock and key for equipment, instrumentations where ever necessary. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.

Quantity1

Rate-

Amount -

Pressure Reducing Valves

Quantity-

Rate-

Amount -

Supply , Delivery and installation of manually adjusted preassure reducing valves , accurate pressure ratings. Maximum Upstream Pressure : 20 bar ; Maximum Working Temperature : 80°C. These PRV must be installed at key inlets points of the service reservior.

Quantity-

Rate-

Amount -

Zone-I DMA ( Mandlabailu (Near Bus Stand) , 700 KL , Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

100 mm

Quantity2

Rate-

Amount -

150 mm

Quantity1

Rate-

Amount -

250 mm

Quantity1

Rate-

Amount -

Zone-II DMA ( Krapu Chinthalapudi , 500 KL , Inlet 350 mm Ø )

Quantity-

Rate-

Amount -

100 mm

Quantity2

Rate-

Amount -

150 mm

Quantity1

Rate-

Amount -

250 mm

Quantity1

Rate-

Amount -

Zone-III DMA ( Aganvadi kendram near polamma temple Tillamma cheruvu , 500 KL , Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

100 mm

Quantity2

Rate-

Amount -

150 mm

Quantity1

Rate-

Amount -

250 mm

Quantity1

Rate-

Amount -

Zone-IV DMA ( Somidevarapalem , 700 KL , Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

100 mm

Quantity2

Rate-

Amount -

150 mm

Quantity1

Rate-

Amount -

250 mm

Quantity1

Rate-

Amount -

Handheld Devices

Quantity-

Rate-

Amount -

Supply delivery and comissioning the Handheld Devices for meter reading and bill printing. The power back up of this item shall be for 24 hours , android based with on line and offline capabilities, portable credit/debit card machine reader integrated. The connectivity to the central server will be via rest full services with highest security standards , in json data format as directed by the departmental offer. The bill generation , collection shall reflect across the entire system and the acknoledgement of the receipt shall be sent by SMS to the consumer. SIM charges for 7 years shall be provided. This item shall include the cost of consumables for the defect liability period of 2 years.

Quantity4

Rate-

Amount -

Control Centre

Quantity-

Rate-

Amount -

Meter Intergations with server

Quantity1

Rate-

Amount -

Supply, testing installation and commissioning of command control: Reputed / Branded Hardware servers (2 nos) with 8GB RAM and 1TB Hard Disk including for operating system server license CentOS/Lunix , Windows OS, key board mouse with 20" LED monitor, Routers, firewall, bill printer , as required for running the software and internet broad band connection with static IP for for 84 months . 2 nos desktop with windows operating system with 8GB RAM and 1TB Hardisk, key board mouse and 20" LED monitor , 3 Nos work station with 3 chairs for each work station , racks for servers , network wiring , power wiring , etc . This item shall, including cost, conveyance , warrenty for 2 years , complete as directed by the departmental officers.

Quantity1

Rate-

Amount -

Supply, testing and commissioning of 55" LED monitor with Ethernet/HDMI/VGA/WIFI with waranty for 2 years

Quantity1

Rate-

Amount -

Software shall have modules such as Consumer master , grievence , billing , reports , SMS integration , Access log module, online payment module , consumer logins , metering details , dash board , with authentication and authorisation module , issue tracker , accounting and finance module. The soft ware shall expose restfull web services for further/future integrations with other software. The database, web-server shall be open source, license free, portable with all internationally accepted security standards. Authorisation and user access control shall be implemented for the applications mentioned. The application/software shall provide Restful Web Service interface with JSON data format so that it can be integrated to other centralised software and the Android application. All the data received from the instruments and meters shall be stored in database for a period of 4 years and reports shall be retrieved on demand. The data shall be integrated to the SCADA server as directed by the deparmental officer.

Quantity1

Rate-

Amount -

Printer - 3 in one on color printer with refillable ink bank

Quantity1

Rate-

Amount -

Supply, Delivery and Installation of 1600VA UPS with solar panels, battery enclosures with doors along with racks, to provide 40 hours battery backup calculated at 50% load. The solar panels should to charge the battery to full capacity in 7 hours of sunshine. As per relevant specification amended time to time for single phase input with input circuit breakers provided protection, sine wave from with sealed battery, maintenance free, recharge time conform to standards. The Batteries shall be of VLRA Type. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.

Quantity1

Rate-

Amount -

Bill No : 3.5 Providing for Implementation of Environmental Management Plan in the estimate for Mummadivaram Nagara Panchayat.

Quantity-

Rate-

Amount -

I. Monitoring Costs : Construction Phase (Two years)

Quantity-

Rate-

Amount -

Air Quality Monitoring ( 4 Monitoring stations) once in a month for three seasons during the construction period at Intake well, GLBR,WTP, ELSRs & Raw & clear water pipe lines

Quantity16.2

Rate-

Amount -

Noise level Monitoring ( 4 Monitoring stations) once in a month for three seasons during the construction period at Intake well, GLBR,WTP, ELSRs & Raw & clear water pipe lines

Quantity16.2

Rate-

Amount -

Water Quality Monitoring surface / ground (4 Monitoring stations) once in a month for three seasons during the construction period at Intake well, GLBR,WTP, ELSRs & Raw & clear water pipe lines

Quantity23.4

Rate-

Amount -

Monitoring Costs : Operation Phase ( One year)

Quantity-

Rate-

Amount -

Air Quality Monitoring ( 4 Monitoring stations) once in a month for three seasons during the construction period at Intake well, GLBR,WTP, ELSRs & Raw & clear water pipe lines

Quantity10.8

Rate-

Amount -

Noise level Monitoring ( 4 Monitoring stations) once in a month for three seasons during the construction period at Intake well, GLBR,WTP, ELSRs & Raw & clear water pipe lines

Quantity10.8

Rate-

Amount -

Water Quality Monitoring surface / ground (4 Monitoring stations) once in a month for three seasons during the construction period at Intake well, GLBR,WTP, ELSRs & Raw & clear water pipe lines

Quantity15.6

Rate-

Amount -

II. Compensatory plantation and three years maintenance (Compensatory afforestation ratio is 1:5)-Plant & Tree Gaurds

Quantity54

Rate-

Amount -

Greenbelt development and maintenance in the surroundings / Buffer zone

Quantity1

Rate-

Amount -

Health checkups and free medical distribution

Quantity1

Rate-

Amount -

Awareness program/training

Quantity1

Rate-

Amount -

III. Sprinkling of water with 5000 Litres capacity tankers once in a day for 600 days (excluding rainy days)

Quantity360

Rate-

Amount -

Hiring for 1 Nos. Vehicle for 24 Months during execution period.

Quantity-

Rate-

Amount -

Hiring for 1 Nos. Vehicles for 24 Months during execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,

Quantity14.4

Rate-

Amount -

Cap Bill No: 3.6 O & M

Quantity-

Rate-

Amount -

Personal required for operating Valves in distribution lines

Quantity-

Rate-

Amount -

fitters- Gravity Main(distrubition)

Quantity252

Rate-

Amount -

Valve Operator/Turn Cocks

Quantity168

Rate-

Amount -

Helpers for Distribution

Quantity252

Rate-

Amount -

Repairs to pumpsets & Water pipe lines ( for Five years )

Quantity-

Rate-

Amount -

Replacement of glands of sluice valves

Quantity15

Rate-

Amount -

Replacements of balls of Air valves

Quantity15

Rate-

Amount -

Service Charge for bill generations , collections and maintainence for 5334 consumers x 12 months x 7 years = 448056 . This item includes cost of consumables

Quantity464520

Rate-

Amount -

Monitoring Costs: Operation Phase (One Year)

Quantity-

Rate-

Amount -

Air Quality Monitoring (5 Monitoring stations) twice in a year at distribution network and as per Technical specification

Quantity30

Rate-

Amount -

Noise level Monitorin(5 Monitoring stations ) Twice in a year at distribution network and asper Technical specification

Quantity30

Rate-

Amount -

Water Quality Monitorin(5 Monitoring Location)Twice in a year at and distribution network and asp technical specification

Quantity42

Rate-

Amount -

GOLLAPROLU NAGAR PANCHAYAT

Quantity-

Rate-

Amount -

CAP Bill no : 2.1 Providing of Distribution system for Zone - I to VII including Road Restoration.

Quantity-

Rate-

Amount -

Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.

Quantity1440

Rate-

Amount -

Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.

Quantity470

Rate-

Amount -

Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.

Quantity940

Rate-

Amount -

Earthwork in excavation for Pipe Line as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material by Manual Means.

Quantity10920

Rate-

Amount -

Earthwork in excavation for Pipe Line as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material by Manual Means. (RBR-FNDN-1 (I B i).(70%)

Quantity25480

Rate-

Amount -

Providing bedding with sand for pipelines trencehs as per specification and drawing including cost and conveyance of materials to site with all leads, lifts including watering, tamping, ramming, labour charges, all other incidental and operational charges etc., complete as per detailed specification and directed by the Engineer - in - Charge

Quantity2860

Rate-

Amount -

Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per detailed specification and directed by the Engineer - in - Charge

Quantity-

Rate-

Amount -

110 OD HDPE Pipes

Quantity13625

Rate-

Amount -

160 OD HDPE Pipes

Quantity12045

Rate-

Amount -

200 OD HDPE Pipes

Quantity9278

Rate-

Amount -

250 OD HDPE Pipes

Quantity4149

Rate-

Amount -

315 OD HDPE Pipes

Quantity950

Rate-

Amount -

Jointing the C.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 complete as per detailed specification and directed by the Engineer - in - Charge

Quantity-

Rate-

Amount -

80 mm Dia

Quantity46

Rate-

Amount -

100 mm Dia

Quantity127

Rate-

Amount -

150 mm Dia

Quantity189

Rate-

Amount -

200 mm dia

Quantity128

Rate-

Amount -

250 mm dia

Quantity74

Rate-

Amount -

300mm dia

Quantity50

Rate-

Amount -

Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to work spot, stacking excluding all taxes and duties etc.complete as per detailed specification and directed by the Engineer - in - Charge

Quantity-

Rate-

Amount -

Pipe ends - long neck

Quantity-

Rate-

Amount -

110 mm Dia

Quantity44

Rate-

Amount -

150 mm Dia

Quantity40

Rate-

Amount -

160 mm dia for Air TEEs

Quantity36

Rate-

Amount -

200 mm dia

Quantity32

Rate-

Amount -

200 mm dia for Air TEEs

Quantity32

Rate-

Amount -

250 mm dia

Quantity20

Rate-

Amount -

250 mm dia for Air TEEs

Quantity14

Rate-

Amount -

315mm dia

Quantity12

Rate-

Amount -

315 mm dia for Air TEEs

Quantity10

Rate-

Amount -

315 mm dia for bulk flow meter

Quantity6

Rate-

Amount -

b) MS Flanges

Quantity-

Rate-

Amount -

110mm dia

Quantity44

Rate-

Amount -

160mm dia

Quantity40

Rate-

Amount -

160mm dia Air Tees

Quantity36

Rate-

Amount -

200 mm dia

Quantity32

Rate-

Amount -

200 mm dia Air Tees

Quantity32

Rate-

Amount -

250mm dia

Quantity20

Rate-

Amount -

250mm dia Air Tees

Quantity14

Rate-

Amount -

315mm dia

Quantity12

Rate-

Amount -

315mm dia Air Tees

Quantity10

Rate-

Amount -

315mm dia bulk flow meter

Quantity6

Rate-

Amount -

End Caps

Quantity-

Rate-

Amount -

110mm dia.

Quantity7

Rate-

Amount -

160mm dia.

Quantity7

Rate-

Amount -

200mm dia.

Quantity4

Rate-

Amount -

Reducers

Quantity-

Rate-

Amount -

110X125 mm dia

Quantity38

Rate-

Amount -

125x140 mm dia

Quantity38

Rate-

Amount -

140x160 mm dia

Quantity38

Rate-

Amount -

160x180 mm dia

Quantity31

Rate-

Amount -

180x200 mm dia

Quantity31

Rate-

Amount -

200x225 mm dia

Quantity6

Rate-

Amount -

225x250 mm dia

Quantity6

Rate-

Amount -

250x280 mm dia

Quantity6

Rate-

Amount -

280x315 mm dia

Quantity6

Rate-

Amount -

TEES

Quantity-

Rate-

Amount -

110mm dia.

Quantity38

Rate-

Amount -

160mm dia.

Quantity33

Rate-

Amount -

200mm dia.

Quantity29

Rate-

Amount -

250mm dia.

Quantity17

Rate-

Amount -

315mm dia

Quantity7

Rate-

Amount -

Bends

Quantity-

Rate-

Amount -

110mm dia.

Quantity24

Rate-

Amount -

160mm dia.

Quantity21

Rate-

Amount -

200mm dia.

Quantity17

Rate-

Amount -

250mm dia.

Quantity9

Rate-

Amount -

315mm dia

Quantity5

Rate-

Amount -

Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc., complete as per detailed specification and directed by the Engineer - in - Charge

Quantity-

Rate-

Amount -

110mm dia.

Quantity13625

Rate-

Amount -

160mm dia.

Quantity12045

Rate-

Amount -

200mm dia.

Quantity9278

Rate-

Amount -

250mm dia.

Quantity4149

Rate-

Amount -

315mm dia

Quantity950

Rate-

Amount -

Supply and delivery of DI Pipes and fittings (Specials) confirming to specification No.I.S.No. 7181/1986, 5531/1988, 3950/1979 excluding GST and other duties including transportation and conveyance to work spot and stacking etc., complete as per S.S and as directed by the departmental authorities.

Quantity-

Rate-

Amount -

100X2.00m on 110 dia mains for scours

Quantity6

Rate-

Amount -

100X2.00m on 160 dia mains for scours

Quantity6

Rate-

Amount -

100x1.00m long DF pipes for sluice valves

Quantity44

Rate-

Amount -

150X2.00m on 200 mm dia mains for scours

Quantity6

Rate-

Amount -

150X2.00m on 250 mm dia mains for scours

Quantity2

Rate-

Amount -

150x1.00m long DF pipes for sluice valves

Quantity40

Rate-

Amount -

200x1.00m long DF pipes for sluice valves

Quantity32

Rate-

Amount -

250x1.00m long DF pipes for sluice valves

Quantity20

Rate-

Amount -

300x1.00m long DF pipes for sluice valves

Quantity12

Rate-

Amount -

300x1.00m long DF pipes for bulkflow meter

Quantity6

Rate-

Amount -

supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation. PN16

Quantity-

Rate-

Amount -

100mm dia for distrubution

Quantity22

Rate-

Amount -

150mm dia for distrubution

Quantity20

Rate-

Amount -

200mm dia for distrubution

Quantity16

Rate-

Amount -

250mm dia for distrubution

Quantity10

Rate-

Amount -

300mm dia for distrubution

Quantity6

Rate-

Amount -

for scour

Quantity-

Rate-

Amount -

100mm dia on 110 mm dia mains

Quantity3

Rate-

Amount -

100mm dia on 160 mm dia mains

Quantity3

Rate-

Amount -

150 mm dia on 200 mm dia lines

Quantity3

Rate-

Amount -

150 mm dia on 250 mm dia lines

Quantity1

Rate-

Amount -

Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16

Quantity-

Rate-

Amount -

Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valve complete as per detailed specification and directed by the Engineer - in - Charge

Quantity-

Rate-

Amount -

100mm dia for distrubution

Quantity22

Rate-

Amount -

150mm dia for distrubution

Quantity20

Rate-

Amount -

200mm dia for distrubution

Quantity16

Rate-

Amount -

250mm dia for distrubution

Quantity10

Rate-

Amount -

300mm dia for distrubution

Quantity6

Rate-

Amount -

300mm dia for bulk flow meter

Quantity3

Rate-

Amount -

for scour

Quantity-

Rate-

Amount -

100mm dia on 110 mm dia mains

Quantity3

Rate-

Amount -

100mm dia on 160 mm dia mains

Quantity3

Rate-

Amount -

150 mm dia on 200 mm dia lines

Quantity3

Rate-

Amount -

150 mm dia on 250 mm dia lines

Quantity1

Rate-

Amount -

Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete as per detailed specification and directed by the Engineer - in - Charge

Quantity46

Rate-

Amount -

Construction of sluice and scour Valve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work

Quantity-

Rate-

Amount -

100mm dia for distrubution

Quantity22

Rate-

Amount -

150mm dia for distrubution

Quantity20

Rate-

Amount -

200mm dia for distrubution

Quantity16

Rate-

Amount -

250mm dia for distrubution

Quantity10

Rate-

Amount -

300mm dia for distrubution

Quantity6

Rate-

Amount -

300mm dia for bulk flow meter

Quantity3

Rate-

Amount -

for scour

Quantity-

Rate-

Amount -

100mm dia on 110 mm dia mains

Quantity3

Rate-

Amount -

100mm dia on 160 mm dia mains

Quantity3

Rate-

Amount -

150 mm dia on 200 mm dia lines

Quantity3

Rate-

Amount -

150 mm dia on 250 mm dia lines

Quantity1

Rate-

Amount -

Construction of Air Valve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work

Quantity-

Rate-

Amount -

80 mm dia on 160 mm pipe

Quantity18

Rate-

Amount -

80 mm dia on 200 mm pipe

Quantity16

Rate-

Amount -

80mm dia 250 mm pipe

Quantity7

Rate-

Amount -

80mm dia 315 mm pipe

Quantity5

Rate-

Amount -

Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94 complete as per detailed specification and directed by the Engineer - in - Charge

Quantity-

Rate-

Amount -

100 mm

Quantity74

Rate-

Amount -

150 mm

Quantity78

Rate-

Amount -

200 mm

Quantity48

Rate-

Amount -

250 mm

Quantity27

Rate-

Amount -

300 mm

Quantity23

Rate-

Amount -

Filling crushur stone dust in pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH complete as per detailed specification and directed by the Engineer - in - Charge

Quantity4640

Rate-

Amount -

Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine Crushed Graded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. for BT&CC roads etc., complete as per detailed specification and directed by the Engineer - in - Charge

Quantity648

Rate-

Amount -

DISTRIBUTION NET WORK TOTAL COST

Quantity-

Rate-

Amount -

Cap Bill No. 2.2 HOUSE SERVICE CONNECTIONS (HSC'S)

Quantity-

Rate-

Amount -

Providing 15mm dia New House service connections Service connections totalling 6311 Nos. HSCs.

Quantity-

Rate-

Amount -

Providing House service connections on HDPE mains a) 1 No.of MDPE PE 80 blue/PE100 black Electro Fusion Tapping Saddle (Flexifit-Top loading type with load bearing capacity of 1500N) Electro Fusion Tapping Saddle shall comply with BS EN 12201-3:2011, PN-12.5/PN-16 Rating and manufactured from virgin resin of PE-80/PE-100 having blue/black colour. Raw material must be WRAS Approved as per BS 6920 for effect on water quality intended for human consumption. b) 1 No. of regulating brass ferrule as per IS 2692 c) 2 No. of compression adaptor with one side compression end to suit ½” (20mm OD )MDPE pipe and other side with female threaded off-take with SS-304 material inserts of sizes ½” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16. d) 2 No. of Double compression elbow to suit ½” (20mm OD )MDPE pipe, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16. e)MDPE PE80 Blue Pipe of specified length as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of ½” (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced. f) CP bibcock g) Geotagging of the HSC h) drilling of hoe in RCC / RR in compound wall i) holder clamps where ever required j) UPVC pipe for drain crossing

Quantity-

Rate-

Amount -

Providing house service connections at house holds side in earthern roads (Minimum 4.0 Mts MDPE pipe)

Quantity716

Rate-

Amount -

Providing house service connections at other side in earthern roads ((Minimum 7.0 Mts MDPE pipe)

Quantity716

Rate-

Amount -

Providing house service connections at HH side in BT &CC roads (Minimum 7.0 Mts MDPE pipe)

Quantity1908

Rate-

Amount -

Providing house service connections at other side in BT &CC roads (Minimum 4.0 Mts MDPE pipe)

Quantity1431

Rate-

Amount -

HOUSE SERVICE CONNECTIONS TOTAL COST

Quantity-

Rate-

Amount -

CAP Bill No: 2.3 Providing for Implementation of Environmental Management Plan in the estimate for GollaproluNagara Panchaayth.

Quantity-

Rate-

Amount -

I. Monitoring Costs : Construction Phase (Two years)

Quantity-

Rate-

Amount -

Air Quality Monitoring ( 4 Monitoring stations) once in a month for three seasons during the construction period at Infiltration Gallaries, ELSRs & clear water pipe lines and Distribution Network

Quantity18

Rate-

Amount -

Noise level Monitoring ( 4 Monitoring stations) once in a month for three seasons during the construction period at Infiltration Gallaries, ELSRs & clear water pipe lines and Distribution Network

Quantity18

Rate-

Amount -

Water Quality Monitoring surface / ground ( 4 Monitoring stations) once in a month for three seasons during the construction period at Infiltration Gallaries, ELSRs & clear water pipe lines and Distribution Network

Quantity25.2

Rate-

Amount -

II. Monitoring Costs : Construction Phase (one years)

Quantity-

Rate-

Amount -

Air Quality Monitoring ( 4 Monitoring stations) once in a month for three seasons during the construction period at Infiltration Gallaries, ELSRs & clear water pipe lines and Distribution Network

Quantity12

Rate-

Amount -

Noise level Monitoring ( 4 Monitoring stations) once in a month for three seasons during the construction period at Infiltration Gallaries, ELSRs & clear water pipe lines and Distribution Network

Quantity12

Rate-

Amount -

Water Quality Monitoring surface / ground ( 4 Monitoring stations) once in a month for three seasons during the construction period at Infiltration Gallaries, ELSRs & clear water pipe lines and Distribution Network

Quantity16.8

Rate-

Amount -

Compensatory plantation and three years maintenance (Compensatory afforestation ratio is 1:5).

Quantity60

Rate-

Amount -

Greenbelt development and maintenance in the surroundings / Buffer zone

Quantity1

Rate-

Amount -

Health checkups and free medical distribution

Quantity1

Rate-

Amount -

Awareness program/training

Quantity1

Rate-

Amount -

Sprinkling of water once in a day for two years (excluding rainy days): 400 days @ Rs.1000/trip

Quantity240

Rate-

Amount -

Hiring for 1 Nos. Vehicles for 24 Months during execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,

Quantity14.4

Rate-

Amount -

Cap Bill No 2.4: Supply, deliver and installation of bulk flow meter including consumer meters and other instruments in the deliveries for the DMAs of GOLLAPROLU

Quantity-

Rate-

Amount -

Electromagnetic Flow Meters

Quantity-

Rate-

Amount -

Supply, delivery, installation and integration of Electromagnetic flow meter with IP68 and as per ISO 9001:2008,meter tube should be SS304 material, CS flanges of PN10/PN16 rating liner - hard rubber/polyurethane with WRAS or NSF drinking water approval, electrodes - SS316, 2 measuring electrodes for measuring,1 ground elctrode,1 empty pipe detection, coil housing - SS304 fully welded construction for corrosion grade/painted steel with protective lacquering (corrosive protection, class up to C5-1) as per EN ISO-12944/carbon steel, IP68 protection, Accuracy +/- 0.5% of measured value inclusive of linearity, repeatability etc, grounding rings of SS316/304. Flow transmitter microprocessor based wall mounted, flow ranges of the meter (full flow range). The overall uncertainty of the calibration rig should be atleast three times better than the uncertainty of the full bore electromagnetic flow meter. The competent government authority such as FCRI/NABL must certify the test facility etc. The EMF must be integrated with local SCADA server and the reading shall be captured all times 24x7. The flowmeter values must be persistent and there is no loss of data. The meter shall have display panel for displaying the readings according. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.

Quantity-

Rate-

Amount -

Zone-I ( EBC Colony , DMA Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

200MM

Quantity1

Rate-

Amount -

Zone-I ( EBC Colony , DMA Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

300MM

Quantity1

Rate-

Amount -

Zone-II a ( Near Proposed WTP , DMA Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

300MM

Quantity1

Rate-

Amount -

Zone-II b ( Near Proposed WTP , DMA Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

250mm

Quantity1

Rate-

Amount -

Zone-II c ( Near Proposed WTP , DMA Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

250mm

Quantity1

Rate-

Amount -

Zone-III ( SC Colony , DMA Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

250MM

Quantity1

Rate-

Amount -

Zone-III ( SC Colony ,DMA Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

250MM

Quantity1

Rate-

Amount -

Pressure Transmitter

Quantity-

Rate-

Amount -

Supply, delivery , installation of pressure transmitter with a pressure range of up to 16 bar and 64 bar for appropriate usages. Output: 4 to 20 mA, permissible temperature: -20°C to +70°C, IP65 rated with local display. For This item shall, including cost, conveyance, etc complete as directed by the departmental officers.

Quantity14

Rate-

Amount -

Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format.

Quantity14

Rate-

Amount -

Construction of CC masonry chambers with a openable MS hatch, with lock and key arrangement, steps arrangement, for Electromagnetic Flow meters, Butterfly valves as per pipe sizes including cost of cement, sand, bricks and other required material, including painting and suitable painting material, including labour charges. , Excavation and including wages. Complete as directed by the departmental officer.

Quantity-

Rate-

Amount -

200mm

Quantity1

Rate-

Amount -

250mm

Quantity4

Rate-

Amount -

300mm

Quantity2

Rate-

Amount -

Chlorine Analyzer

Quantity-

Rate-

Amount -

Supply, installation , delivery and testing wall mounted ABS plastic enclosure based Online Chlorine Analyzer of Amphreometric or Potentiometric type. Specifications of Range: 0 to 5 mg/L free or total residual chlorine, Resolution 0.01 PPM, Accuracy: +/- 0.05 PPM or better, Cycle Time: 4 minutes, Inlet: Sample Temperature: 5 to 40 °C, operating Temperature: Range 5 to 60 °C. Local LCD Display to display the values. Output: 4-20 mA or 0-10 VDC to integrate into PLC if needed. PH Compensation must be Auto/Manual. All accessories that are required for the must be provided.This item shall include the cost of consumables for the defect liability period of 2 years.

Quantity1

Rate-

Amount -

Turbidity Analyzer

Quantity-

Rate-

Amount -

Supply, installation , delivery and testing of wall mounted Turbidity Analyzer make of HACH/ ABB/ Forbes Marshall with specifications of Range 0.00-500.0(NTU/FNU), Operating Temperature : 0 – 60 °C, Displayed Resolution : 0.01 (0.00-19.99), 0.1(20.0-500.0)NTU/FNU, Response Time : Initial response in 1 minute, 15 seconds for a full-scale step change Signal, Sample, Temperature : 0 to 50°C (32 to 122°F), Output 4-20mA to integrate into PLC if needed. Local LCD Display to display the values . This item includes the cost of consumables for the defect liability period of 2 years.

Quantity1

Rate-

Amount -

Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format.

Quantity1

Rate-

Amount -

Supply delivery and installation of Protection MS grills with lock and key for equipment, instrumentations where ever necessary. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.

Quantity1

Rate-

Amount -

Pressure Reducing Valves

Quantity-

Rate-

Amount -

Supply , Delivery and installation of manually adjusted preassure reducing valves , accurate pressure ratings. Maximum Upstream Pressure : 20 bar ; Maximum Working Temperature : 80°C. These PRV must be installed at key inlets points of the service reservior.

Quantity-

Rate-

Amount -

Zone-I ( EBC Colony , DMA Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

100 mm

Quantity2

Rate-

Amount -

150 mm

Quantity1

Rate-

Amount -

200 mm

Quantity1

Rate-

Amount -

Zone-I ( EBC Colony , DMA Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

100 mm

Quantity2

Rate-

Amount -

150 mm

Quantity1

Rate-

Amount -

200 mm

Quantity1

Rate-

Amount -

Zone-II a ( Near Proposed WTP , DMA Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

100 mm

Quantity2

Rate-

Amount -

150 mm

Quantity1

Rate-

Amount -

200 mm

Quantity1

Rate-

Amount -

Zone-II b ( Near Proposed WTP , DMA Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

100 mm

Quantity2

Rate-

Amount -

150 mm

Quantity1

Rate-

Amount -

200 mm

Quantity1

Rate-

Amount -

Zone-II c ( Near Proposed WTP , DMA Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

100 mm

Quantity2

Rate-

Amount -

150 mm

Quantity1

Rate-

Amount -

200 mm

Quantity1

Rate-

Amount -

Zone-III ( SC Colony , DMA Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

100 mm

Quantity2

Rate-

Amount -

150 mm

Quantity1

Rate-

Amount -

200 mm

Quantity1

Rate-

Amount -

Zone-III ( SC Colony , DMA Inlet 300 mm Ø )

Quantity-

Rate-

Amount -

100 mm

Quantity2

Rate-

Amount -

150 mm

Quantity1

Rate-

Amount -

200 mm

Quantity1

Rate-

Amount -

ULTRASONIC AMR METERS

Quantity-

Rate-

Amount -

Handheld Devices

Quantity-

Rate-

Amount -

Supply delivery and comissioning the Handheld Devices for meter reading and bill printing. The power back up of this item shall be for 24 hours , android based with on line and offline capabilities, portable credit/debit card machine reader integrated. The connectivity to the central server will be via rest full services with highest security standards , in json data format as directed by the departmental offer. The bill generation , collection shall reflect across the entire system and the acknoledgement of the receipt shall be sent by SMS to the consumer. SIM charges for 7 years shall be provided. This item shall include the cost of consumables for the defect liability period of 2 years.

Quantity5

Rate-

Amount -

Control Centre

Quantity-

Rate-

Amount -

Meter Intergations with server

Quantity1

Rate-

Amount -

Supply, testing installation and commissioning of command control: Reputed / Branded Hardware servers (2 nos) with 8GB RAM and 1TB Hard Disk including for operating system server license CentOS/Lunix , Windows OS, key board mouse with 20" LED monitor, Routers, firewall, bill printer , as required for running the software and internet broad band connection with static IP for for 84 months . 2 nos desktop with windows operating system with 8GB RAM and 1TB Hardisk, key board mouse and 20" LED monitor , 3 Nos work station with 3 chairs for each work station , racks for servers , network wiring , power wiring , etc . This item shall, including cost, conveyance , warrenty for 2 years , complete as directed by the departmental officers.

Quantity1

Rate-

Amount -

Supply, testing and commissioning of 55" LED monitor with Ethernet/HDMI/VGA/WIFI with waranty for 2 years

Quantity1

Rate-

Amount -

Software shall have modules such as Consumer master , grievence , billing , reports , SMS integration , Access log module, online payment module , consumer logins , metering details , dash board , with authentication and authorisation module , issue tracker , accounting and finance module. The soft ware shall expose restfull web services for further/future integrations with other software. The database, web-server shall be open source, license free, portable with all internationally accepted security standards. Authorisation and user access control shall be implemented for the applications mentioned. The application/software shall provide Restful Web Service interface with JSON data format so that it can be integrated to other centralised software and the Android application. All the data received from the instruments and meters shall be stored in database for a period of 4 years and reports shall be retrieved on demand. The data shall be integrated to the SCADA server as directed by the deparmental officer.

Quantity1

Rate-

Amount -

Printer - 3 in one on color printer with refillable ink bank

Quantity1

Rate-

Amount -

Supply, Delivery and Installation of 1600VA UPS with solar panels, battery enclosures with doors along with racks, to provide 40 hours battery backup calculated at 50% load. The solar panels should to charge the battery to full capacity in 7 hours of sunshine. As per relevant specification amended time to time for single phase input with input circuit breakers provided protection, sine wave from with sealed battery, maintenance free, recharge time conform to standards. The Batteries shall be of VLRA Type. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.

Quantity1

Rate-

Amount -

Cap Bill No. 2.5 Supply,delivery,installing,testing and commissioning domestic Battery operated, with prefrabicated meter box , “B” class, AMR Ultrasonic Water Meters having No moving part in contact with water, with magnetically sealed coupled and hermetically sealed register, with fully body made up of brass, confirming to ISO 4064 along with manufacturing test certificate and Guarantee certificate with Battery life of min. 7 years with GSM / RF Technology for communication to server with PC Software including all material required for fixing, labour & giving satisfactory leak proof test etc Complete. General Specifications : Meter should be battery operated with no moving parts, low pressure loss, dry type as per ISO 4064 / OIML R49 and certification as per FCRI / MID.Display: 8 digit LCD, Protection class IP 68 , Ambient 50 deg. , Pressure : PN - 1.6, POWER SUPPLY : 3.6 lithium battery with minimum life of 10 years. Warranty included for 7 years . Memory built-in and should have storage for at least 12 months with daily / monthly accumulated totalised data with time and date should be available. It should be able to access memory of the meter through serial communication. The readings should be obtainable by either walkby or drive by on Android device. The acceptance / routine tests shall be either conducted by M/s. Fluid Control Research Institute, Palghat, Kerala or any of the Laboratories approved by the National Accreditation Board for calibration Laboratories (NABL) or installation at site etc complete..including all charges excluding tax.

Quantity-

Rate-

Amount -

Provide installing and giving Satisfactory field testing of battery Operated "B" Class AMR Ultrasonic Meters having no moving part in Contact with water with magnetically sealed coupled and Hermitically sealed register ,with full brass body confirming to ISO 4064 along with manufacturing test certificate with battery life of min.10 years with GSM /RF Technology for communication to server with PC Software including all materials required for fixing ,labour and giving satisfactory leak proof test etc Complete,General Specifications:-1) Meter should be battery operated with no moving parts,low prtesser ,loss,dry type as per FCRI /MID.2)Display:- 8 digit LCD,3)Encloser :-Protection class IP 68 4) Tempature :-Ambit 50deg .C 5) Pressure :-minimum life of 10 Years 7) Memory built -In and should have storage for at least 12 months with daily /monthly accumulated totailised data with time and date should be available .It should able to access memory of the meter through serial communications 8) End Connection:- Screwed up to 40mm BSP/Npt coupling 9) Installation:- Should be able to install in any orientation 10) Transducre :-Inbuilt as per detailed Technical Specifications . 11) The acceptance /routine test shall be either conducted by M/S.Fliud Control Research In stitute ,Palght,Kerala or any of the Laboratories apporved by the National Accerditation Board for Calibration Laboratories (NABL) or EEC pattern apporaval certificates with at least 5 years battery life, including dual channel data loggers ,fixing specials,installation at site etc.. including providing and fixing in position poly propylene water meter box to accommodate water meter all charges and excluding GST

Quantity-

Rate-

Amount -

AMR meters

Quantity4765

Rate-

Amount -

Cap Bill No. 2.6 Manning, Operation and Maintenance of Gollaprolu Nagar Panchayath Water Supply Improvement Scheme for 7 years -distrubution

Quantity-

Rate-

Amount -

A)The quantities given here are those up on which the lump sum cost of the work is based, but they are subject to alterations, omissions, deductions or additions as provided for in the conditions of tahe contract and do not necessarily show the actual quantities of work to be done. The unit rates noted below are those governing payment for extras or deductions or omissions according to the conditions are set forth in the P.S. to APDSS and other conditions or specifications of the contract.

Quantity-

Rate-

Amount -

B) It is to be expressed understood that the measured work is to be taken net (not withstanding any custom or practice to the contrary) according to the actual quantities placed and finished according to tahe drawings or as may be ordered from time to by the Superintnding Engineer (PH) West Circle, Hyderabad and the calculated by measurement or weight at the respective prices with out any additional charges for any necessary or contingent works connected there with. The rates quoted are for works in site and complete in every respect.

Quantity-

Rate-

Amount -

Description

Quantity-

Rate-

Amount -

For 7 years

Quantity-

Rate-

Amount -

A) Personnel (For 5 Years + 2 Gaurante period )

Quantity-

Rate-

Amount -

Personal required for overall supervision of Water supply scheme

Quantity-

Rate-

Amount -

Personal required for ELSR sites/ Gravity Mains/ Pumping Mains

Quantity-

Rate-

Amount -

fitters- Gravity Main(distrubition)(3 nos x12 monthsx5years)

Quantity252

Rate-

Amount -

Personal required for operating Valves in distribution lines

Quantity-

Rate-

Amount -

Valve Operator/Turn Cocks(2 nos x12 monthsx5years)

Quantity168

Rate-

Amount -

Helpers for Distribution(4 nos x12 monthsx5years)

Quantity168

Rate-

Amount -

Repairs to pumpsets & Water pipe lines ( for Five years )

Quantity-

Rate-

Amount -

iv)Replacement of glands of sluice valves

Quantity10

Rate-

Amount -

v) Replacements of balls of Air valves

Quantity10

Rate-

Amount -

Service Charge for bill generations , collections and maintainence for 6000 consumers x 12 months x 7 years = 504000. This item includes cost of consumables .

Quantity403788

Rate-

Amount -

Monitoring costs:Operation phase(one year)

Quantity-

Rate-

Amount -

Air Quality Monitoring (5 Monitoring stations) twice in a year at distribution network and as per Technical specification

Quantity30

Rate-

Amount -

Noise level Monitorin(5 Monitoring stations ) Twice in a year at distribution network and asper Technical specification

Quantity30

Rate-

Amount -

Water Quality Monitorin(5 Monitoring Location)Twice in a year at and distribution network and asp technical specification

Quantity42

Rate-

Amount -

Abstract of 7 years of O&M of Gollaprolu Nagar Panchayat

Quantity-

Rate-

Amount -

YELESWARAM NAGAR PANCHAYAT

Quantity-

Rate-

Amount -

Cap Bill No: 8.1 Providing Distribution Network

Quantity-

Rate-

Amount -

Cutting open C.C. Road surface including stacking of excavated materials for pipe line trench work including all labour charges and as per Technical Specification

Quantity1695.54

Rate-

Amount -

Cutting open B.T. road surface (as well as asphalt concrete upto 75 mm thick) including water bound macadam including all labor charges and as per Technical Specification

Quantity3271.95

Rate-

Amount -

Providing Safety Protection during pipe line trench work with light based vertical safety cone and tying with safety radium tape roll including cost and conveynce and lbor charges etc., complete as per the technical specification.

Quantity17233

Rate-

Amount -

Earthwork in excavation for Pipe Line as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material by Mechanical Means.

Quantity8424.38

Rate-

Amount -

Earthwork excavation in ordinary rock blasting not required for structures as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification as per specification drawings and as directed by the departmental officer including all incidental and operational charges etc., complete for the pipe line trench

Quantity2106.09

Rate-

Amount -

Earthwork in excavation for Pipe Line as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material by manual Means.

Quantity26752.03

Rate-

Amount -

Earthwork excavation in Hard rock and boulders more than 3 Cum in size for pipeline trenches without blasting for pipeline trenches etc., and as per specification drawing and as directed by departmental officers and to protecting the existing walls and other structures etc., so as not to disturb the existing utility services existing water supply lines, sewers, telephone,power cables/ducts, storm water drains, traffic signals ,etc., during the laying of pipe line taking all precautionary measures in the restricted areas with the initial lead of 50mts and intial lift of 3m for pipeline trenches for laying of water main taking all precautionary measures in the restricted areas such as urban areas including divertion of traffic including all incidental and operational charges etc.as per technical specification.

Quantity2106.09

Rate-

Amount -

Manufacturing, Supply and Delivery of HDPE Pipes of pressure 6Kgs/ Sqcm and 100 grade confirming to IS: 4984 - 1995 including transporation to any where in AP.excise duty, sales tax and excluding specials etc complete as per standard specifications

Quantity-

Rate-

Amount -

250mm dia HDPE PE-100 gr pipe

Quantity1500

Rate-

Amount -

200mm dia HDPE PE-100 gr pipe

Quantity4010

Rate-

Amount -

160mm dia HDPE PE-100 gr pipe

Quantity6182

Rate-

Amount -

110mm dia HDPE PE-100 gr Pipe

Quantity30033

Rate-

Amount -

Lowering ,Laying and jointing of HDPE pipes by butt fusion welding as per IS 7634 - part - II / 1975 as amended from from time to time to the aligment and gradient and testing the pipe line to the required pressure.

Quantity-

Rate-

Amount -

250mm dia HDPE PE-100 gr pipe

Quantity1500

Rate-

Amount -

200mm dia HDPE PE-100 gr pipe

Quantity4010

Rate-

Amount -

160mm dia HDPE PE-100 gr pipe

Quantity6182

Rate-

Amount -

110mm dia HDPE PE-100 gr Pipe

Quantity30033

Rate-

Amount -

Manifacture, supply, & delivery of HDPE fittings conforming to IS 4984 – 1995 including transportation to any where in A.P. excluding excise duty, sales tax and specials etc complete.

Quantity-

Rate-

Amount -

250mm dia HDPE PE-100 gr pipe

Quantity8

Rate-

Amount -

200mm dia HDPE PE-100 gr pipe

Quantity8

Rate-

Amount -

160mm dia HDPE PE-100 gr pipe

Quantity16

Rate-

Amount -

110mm dia HDPE PE-100 gr Pipe

Quantity40

Rate-

Amount -

300mm x 280mm

Quantity8

Rate-

Amount -

280mm x 250mm

Quantity48

Rate-

Amount -

250mm x 225mm

Quantity40

Rate-

Amount -

225mm x 200mm

Quantity40

Rate-

Amount -

200 mm x180 mm

Quantity40

Rate-

Amount -

180 mm x160 mm

Quantity40

Rate-

Amount -

160 mm x140 mm

Quantity40

Rate-

Amount -

140 mm x 125 mm

Quantity40

Rate-

Amount -

125 mm x110 mm

Quantity60

Rate-

Amount -

250mm dia HDPE PE-100 gr pipe

Quantity20

Rate-

Amount -

200mm dia HDPE PE-100 gr pipe

Quantity40

Rate-

Amount -

160mm dia HDPE PE-100 gr pipe

Quantity40

Rate-

Amount -

110mm dia HDPE PE-100 gr Pipe

Quantity48

Rate-

Amount -

250mm dia HDPE PE-100 gr pipe

Quantity24

Rate-

Amount -

200mm dia HDPE PE-100 gr pipe

Quantity16

Rate-

Amount -

160mm dia HDPE PE-100 gr pipe

Quantity40

Rate-

Amount -

110mm dia HDPE PE-100 gr Pipe

Quantity40

Rate-

Amount -

110mm dia

Quantity12400

Rate-

Amount -

Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage with socket spigot ends conforming to i.s.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification k7 suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating The rates are including transportation, taxes etc. complete.

Quantity-

Rate-

Amount -

400 mm DI K7 Pipe

Quantity633

Rate-

Amount -

350 mm DI K7 Pipe

Quantity444

Rate-

Amount -

300 mm DI K7 Pipe

Quantity1083

Rate-

Amount -

Jointing of D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities.

Quantity-

Rate-

Amount -

400 mm DI K7 Pipe

Quantity158.25

Rate-

Amount -

350 mm DI K7 Pipe

Quantity111

Rate-

Amount -

300 mm DI K7 Pipe

Quantity272

Rate-

Amount -

Lowering of D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities.

Quantity-

Rate-

Amount -

400 mm DI K7 Pipe

Quantity633

Rate-

Amount -

350 mm DI K7 Pipe

Quantity444

Rate-

Amount -

300 mm DI K7 Pipe

Quantity1083

Rate-

Amount -

Supply and filling with Sand from approved quarry including cost and conveyance, watering, tamping including all labour charges etc complete for finished item of work

Quantity4212.19

Rate-

Amount -

Supply, delivery of Resilient seated soft sealing gate valves (Sluice valves) (soft Seated) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4 and with Electrostatic powder coating both inside and outside pocket less body passage and drilled as per IS:1538.

Quantity-

Rate-

Amount -

250mm dia valve

Quantity5

Rate-

Amount -

200mm dia sluice valve

Quantity7

Rate-

Amount -

150mm dia sluice valve

Quantity11

Rate-

Amount -

100mm dia sluice valve

Quantity34

Rate-

Amount -

100mm dia sluice valve for scour

Quantity40

Rate-

Amount -

250mm dia valve

Quantity4

Rate-

Amount -

200mm dia sluice valve

Quantity7

Rate-

Amount -

150mm dia sluice valve

Quantity11

Rate-

Amount -

100mm dia sluice valve

Quantity34

Rate-

Amount -

100mm dia sluice valve for scour

Quantity40

Rate-

Amount -

Manufacture, supply and delivery of Ductile Iron pipes and fittings (spls). Conforming to IS No.7181/1986,5531/1988, 3950/1979 and CID joints confirming to IS no.8794/1988 at site of work anywhere in A.P. including loading, unloading, transportation to site of work stacking at site transit risk and package, including all taxes

Quantity5440

Rate-

Amount -

Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete.

Quantity-

Rate-

Amount -

250 mm DF pipes 1.00 m long

Quantity8

Rate-

Amount -

200 mm DF pipes 1.00 m long

Quantity14

Rate-

Amount -

150 mm DF pipes 1.00 m long

Quantity22

Rate-

Amount -

100 mm DF pipes 1.00 m long

Quantity68

Rate-

Amount -

Jointing the CI/DI Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500m and testing to required pressure complete. as per BIS No.3114/85, sl no.135, item no.10

Quantity-

Rate-

Amount -

250mm dia valve

Quantity16

Rate-

Amount -

200mm dia sluice valve

Quantity22

Rate-

Amount -

150mm dia sluice valve

Quantity32

Rate-

Amount -

Construction of RCC valve chamber in M20 Grade as per Type design including cost & conveyance of all materials , labour charges, formwork,machine mixing,vibration , curing etc.complete but excluding cost of Manhole cover ,reinforcement & its fabrication charges.

Quantity-

Rate-

Amount -

250mm dia valve

Quantity17

Rate-

Amount -

200mm dia sluice valve

Quantity13

Rate-

Amount -

150mm dia sluice valve

Quantity16

Rate-

Amount -

100mm dia sluice valve

Quantity75

Rate-

Amount -

100mm dia sluice valve for scour

Quantity40

Rate-

Amount -

100mm dia Air valves

Quantity64

Rate-

Amount -

Collection ,Supply and filling of Stone dust / Quarry spall from approved quarry to work site and stacking at work site for pre measurements including cost and convenyance of all material and all labour charges etc. complete

Quantity4416.08

Rate-

Amount -

Laying VCC in M 30 Grade design mix using 20mm graded SS-5 HBG m/c metal , coarse and fine aggregates conforming to IS: 383, and OPC (cement content between 350 to 425 kg/cum as per IRC mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery, all labour charges (including placing in position expansion longitudinal joints and corner reinforcement if any but excluding cost of joint filler, sealant and reinforcement and its fabrication ), forwork, vibration, curing for 21 days and all incidental & operational charges etc. complete conforming to standard specification for CC Pavement

Quantity2944.05

Rate-

Amount -

CAP Bill No: 1.2 Providing 15mm dia (7987 Nos) new House service connections

Quantity-

Rate-

Amount -

Providing House service connections on HDPE mains a) 1 No.of MDPE PE 80 blue/PE100 black Electro Fusion Tapping Saddle (Flexifit-Top loading type with load bearing capacity of 1500N) Electro Fusion Tapping Saddle shall comply with BS EN 12201-3:2011, PN-12.5/PN-16 Rating and manufactured from virgin resin of PE-80/PE-100 having blue/black colour. Raw material must be WRAS Approved as per BS 6920 for effect on water quality intended for human consumption. b) 1 No. of regulating brass ferrule as per IS 2692 c) 2 No. of compression adaptor with one side compression end to suit ½” (20mm OD )MDPE pipe and other side with female threaded off-take with SS-304 material inserts of sizes ½” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16. d) 2 No. of Double compression elbow to suit ½” (20mm OD )MDPE pipe, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16. e)MDPE PE80 Blue Pipe of specified length as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of ½” (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced. f) CP bibcock g) Geotagging of the HSC h) drilling of hole in RCC / RR in compound wall i) holder clamps where ever required j) UPVC pipe for drain crossing

Quantity-

Rate-

Amount -

PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD SIDE (Minimum 4.0 Mts MDPE pipe)

Quantity3993.5

Rate-

Amount -

PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD OPPOSITE SIDE IN CC &BT ROADS (Minimum 7.0 Mts MDPE pipe)

Quantity1250

Rate-

Amount -

PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD OPPOSITE SIDE IN EARTHEN ROADS (Minimum 7.0 Mts MDPE pipe)

Quantity2743.5

Rate-

Amount -

CAP Bill No: 1.3 AMR Ultrasonic MetersSupply,delivery,installing,testing and commissioning domestic Battery operated, with prefrabicated meter box , “B” class, AMR Ultrasonic Water Meters having No moving part in contact with water, with magnetically sealed coupled and hermetically sealed register, with fully body made up of brass, confirming to ISO 4064 along with manufacturing test certificate and Guarantee certificate with Battery life of min. 7 years with GSM / RF Technology for communication to server with PC Software including all material required for fixing, labour & giving satisfactory leak proof test etc Complete. General Specifications : Meter should be battery operated with no moving parts, low pressure loss, dry type as per ISO 4064 / OIML R49 and certification as per FCRI / MID.Display: 8 digit LCD, Protection class IP 68 , Ambient 50 deg. , Pressure : PN - 1.6, POWER SUPPLY : 3.6 lithium battery with minimum life of 10 years. Warranty included for 7 years . Memory built-in and should have storage for at least 12 months with daily / monthly accumulated totalised data with time and date should be available. It should be able to access memory of the meter through serial communication. The readings should be obtainable by either walkby or drive by on Android device. The acceptance / routine tests shall be either conducted by M/s. Fluid Control Research Institute, Palghat, Kerala or any of the Laboratories approved by the National Accreditation Board for calibration Laboratories (NABL) or installation at site etc complete includung providing and fixing propylene water meter box to accomadate water meter as per specification

Quantity-

Rate-

Amount -

AMR Ultrasonic Meters Supply, delivery, installing, testing and commissioning domestic Battery operated, with prefrabicated meter box , “B” class, AMR Ultrasonic Water Meters having No moving part in contact with water, with magnetically sealed coupled and hermetically sealed register, with fully body made up of brass, confirming to ISO 4064 along with manufacturing test certificate and Guarantee certificate with Battery life of min. 7 years with GSM / RF Technology for communication to server with PC Software including all material required for fixing, labour & giving satisfactory leak proof test etc Complete. General Specifications : Meter should be battery operated with no moving parts, low pressure loss, dry type as per ISO 4064 / OIML R49 and certification as per FCRI / MID.Display: 8 digit LCD, Protection class IP 68 , Ambient 50 deg. , Pressure : PN - 1.6, POWER SUPPLY : 3.6 lithium battery with minimum life of 10 years. Warranty included for 7 years . Memory built-in and should have storage for at least 12 months with daily / monthly accumulated totalised data with time and date should be available. It should be able to access memory of the meter through serial communication. The readings should be obtainable by either walkby or drive by on Android device. The acceptance / routine tests shall be either conducted by M/s. Fluid Control Research Institute, Palghat, Kerala or any of the Laboratories approved by the National Accreditation Board for calibration Laboratories (NABL) or installation at site etc complete includung providing and fixing propylene water meter box to accomadate water meter as per specification

Quantity8907

Rate-

Amount -

CAP Bill No: 1.4 - SCADA

Quantity-

Rate-

Amount -

Electromagnetic Flow Meters

Quantity-

Rate-

Amount -

Supply, delivery, installation and integration of Electromagnetic flow meter with IP68 and as per ISO 9001:2008,meter tube should be SS304 material, CS flanges of PN10/PN16 rating liner - hard rubber/polyurethane with WRAS or NSF drinking water approval, electrodes - SS316, 2 measuring electrodes for measuring,1 ground elctrode,1 empty pipe detection, coil housing - SS304 fully welded construction for corrosion grade/painted steel with protective lacquering (corrosive protection, class up to C5-1) as per EN ISO-12944/carbon steel, IP68 protection, Accuracy +/- 0.5% of measured value inclusive of linearity, repeatability etc, grounding rings of SS316/304. Flow transmitter microprocessor based wall mounted, flow ranges of the meter (full flow range). The overall uncertainty of the calibration rig should be atleast three times better than the uncertainty of the full bore electromagnetic flow meter. The competent government authority such as FCRI/NABL must certify the test facility etc. The EMF must be integrated with local SCADA server and the reading shall be captured all times 24x7. The flowmeter values must be persistent and there is no loss of data. The meter shall have display panel for displaying the readings according. This item shall, including cost, conveyance, including cost of watermeter box etc complete as directed by the departmental officers. as per Technical Specification

Quantity-

Rate-

Amount -

Zone-1 DMA YPC INLET 300mm Dia

Quantity1

Rate-

Amount -

Zone-2 DMA RUPULAMMA TEMPLE INLET 150 mm Dia

Quantity1

Rate-

Amount -

Zone-3 DMA GOVT HOSPITAL INLET 150mm Dia

Quantity1

Rate-

Amount -

Zone-4 DMA RAJAMUNDRY COLONY INLET 150mm Dia

Quantity1

Rate-

Amount -

Pressure Transmitter

Quantity-

Rate-

Amount -

Supply, delivery , installation of pressure transmitter with a pressure range of up to 16 bar and 64 bar for appropriate usages. Output: 4 to 20 mA, permissible temperature: -20°C to +70°C, IP65 rated with local display. For This item shall, including cost, conveyance, etc complete as directed by the departmental officers.as per Technical Specification

Quantity10

Rate-

Amount -

Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format as per Technical Specification .

Quantity10

Rate-

Amount -

Construction of CC masonry chambers with a openable MS hatch, with lock and key arrangement, steps arrangement, for Electromagnetic Flow meters, Butterfly valves as per pipe sizes including cost of cement, sand, bricks and other required material, including painting and suitable painting material, including labour charges. , Excavation and including wages. Complete as directed by the departmental officer.as per Technical Specification

Quantity-

Rate-

Amount -

150MM

Quantity2

Rate-

Amount -

250MM

Quantity2

Rate-

Amount -

300MM

Quantity1

Rate-

Amount -

Chlorine Analyzer

Quantity-

Rate-

Amount -

Supply, installation , delivery and testing wall mounted ABS plastic enclosure based Online Chlorine Analyzer of Amphreometric or Potentiometric type. Specifications of Range: 0 to 5 mg/L free or total residual chlorine, Resolution 0.01 PPM, Accuracy: +/- 0.05 PPM or better, Cycle Time: 4 minutes, Inlet: Sample Temperature: 5 to 40 °C, operating Temperature: Range 5 to 60 °C. Local LCD Display to display the values. Output: 4-20 mA or 0-10 VDC to integrate into PLC if needed. PH Compensation must be Auto/Manual. All accessories that are required for the must be provided.This item shall include the cost of consumables for the defect liability period of 2 years. as per Technical Specification

Quantity1

Rate-

Amount -

Turbidity Analyzer

Quantity-

Rate-

Amount -

Supply, installation , delivery and testing of wall mounted Turbidity Analyzer make of HACH/ ABB/ Forbes Marshall with specifications of Range 0.00-500.0(NTU/FNU), Operating Temperature : 0 – 60 °C, Displayed Resolution : 0.01 (0.00-19.99), 0.1(20.0-500.0)NTU/FNU, Response Time : Initial response in 1 minute, 15 seconds for a full-scale step change Signal, Sample, Temperature : 0 to 50°C (32 to 122°F), Output 4-20mA to integrate into PLC if needed. Local LCD Display to display the values . This item includes the cost of consumables for the defect liability period of 2 years.

Quantity1

Rate-

Amount -

Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format. as per Technical Specification

Quantity1

Rate-

Amount -

Supply delivery and installation of Protection MS grills with lock and key for equipment, instrumentations where ever necessary. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.

Quantity1

Rate-

Amount -

Pressure Reducing Valves

Quantity-

Rate-

Amount -

Supply , Delivery and installation of manually adjusted preassure reducing valves , accurate pressure ratings. Maximum Upstream Pressure : 20 bar ; Maximum Working Temperature : 80°C. These PRV must be installed at key inlets points of the service reservior. as per Technical Specification as per Technical Specification

Quantity-

Rate-

Amount -

Zone-1 YPC COLONY

Quantity-

Rate-

Amount -

100MM

Quantity3

Rate-

Amount -

150MM

Quantity2

Rate-

Amount -

200MM

Quantity3

Rate-

Amount -

Zone-2 DMA RUPULAMMA TEMPLE

Quantity-

Rate-

Amount -

100MM

Quantity3

Rate-

Amount -

150MM

Quantity2

Rate-

Amount -

Zone-3 DMA GOVT HOSPITAL

Quantity-

Rate-

Amount -

100MM

Quantity3

Rate-

Amount -

150MM

Quantity2

Rate-

Amount -

200MM

Quantity1

Rate-

Amount -

Zone-4 DMA RAJAMUNDRY

Quantity-

Rate-

Amount -

100MM

Quantity3

Rate-

Amount -

150MM

Quantity2

Rate-

Amount -

200MM

Quantity1

Rate-

Amount -

Handheld Devices

Quantity-

Rate-

Amount -

Supply delivery and comissioning the Handheld Devices for meter reading and bill printing. The power back up of this item shall be for 24 hours , android based with on line and offline capabilities, portable credit/debit card machine reader integrated. The connectivity to the central server will be via rest full services with highest security standards , in json data format as directed by the departmental offer. The bill generation , collection shall reflect across the entire system and the acknoledgement of the receipt shall be sent by SMS to the consumer. SIM charges for 7 years shall be provided. This item shall include the cost of consumables for the defect liability period of 2 years. as per Technical Specification

Quantity6

Rate-

Amount -

Control Centre

Quantity-

Rate-

Amount -

Meter Intergations with server

Quantity1

Rate-

Amount -

Supply, testing installation and commissioning of command control: Reputed / Branded Hardware servers (2 nos) with 8GB RAM and 1TB Hard Disk including for operating system server license CentOS/Lunix , Windows OS, key board mouse with 20" LED monitor, Routers, firewall, bill printer , as required for running the software and internet broad band connection with static IP for for 84 months . 2 nos desktop with windows operating system with 8GB RAM and 1TB Hardisk, key board mouse and 20" LED monitor , 3 Nos work station with 3 chairs for each work station , racks for servers , network wiring , power wiring , etc . This item shall, including cost, conveyance , warrenty for 2 years , complete as directed by the departmental officers. as per Technical Specification

Quantity1

Rate-

Amount -

Supply, testing and commissioning of 55" LED monitor with Ethernet/HDMI/VGA/WIFI with waranty for 2 years as per Technical Specification

Quantity1

Rate-

Amount -

Software shall have modules such as Consumer master , grievence , billing , reports , SMS integration , Access log module, online payment module , consumer logins , metering details , dash board , with authentication and authorisation module , issue tracker , accounting and finance module. The soft ware shall expose restfull web services for further/future integrations with other software. The database, web-server shall be open source, license free, portable with all internationally accepted security standards. Authorisation and user access control shall be implemented for the applications mentioned. The application/software shall provide Restful Web Service interface with JSON data format so that it can be integrated to other centralised software and the Android application. All the data received from the instruments and meters shall be stored in database for a period of 4 years and reports shall be retrieved on demand. The data shall be integrated to the SCADA server as directed by the deparmental officeras per Technical Specification .

Quantity1

Rate-

Amount -

Printer - 3 in one on color printer with refillable ink bank as per Technical Specification

Quantity1

Rate-

Amount -

Supply, Delivery and Installation of 1600VA UPS with solar panels, battery enclosures with doors along with racks, to provide 40 hours battery backup calculated at 50% load. The solar panels should to charge the battery to full capacity in 7 hours of sunshine. As per relevant specification amended time to time for single phase input with input circuit breakers provided protection, sine wave from with sealed battery, maintenance free, recharge time conform to standards. The Batteries shall be of VLRA Type. This item shall, including cost, conveyance, etc complete as directed by the departmental as per Technical Specification officers.

Quantity1

Rate-

Amount -

Cap Bill No. 1.5 Providing for Implementation of Environmental Management Plan in the estimate for YELESWARAM Municipality.

Quantity-

Rate-

Amount -

I. Monitoring Costs : Construction Phase (Two years)

Quantity-

Rate-

Amount -

Air Quality Monitoring ( 5 Monitoring station) once in a month for three seasons during the construction period at Intake well, GLBR,WTP, ELSRs & Raw & clear water pipe lines

Quantity20

Rate-

Amount -

Noise level Monitoring ( 5 Monitoring station) once in a month for three seasons during the construction period at Intake well, GLBR,WTP, ELSRs & Raw & clear water pipe lines

Quantity20

Rate-

Amount -

Water Quality Monitoring surface / ground (6 Monitoring station) once in a month for three seasons during the construction period at Intake well, GLBR,WTP, ELSRs & Raw & clear water pipe lines

Quantity20

Rate-

Amount -

II. Compensatory plantation and three years maintenance (Compensatory afforestation ratio is 1:5).

Quantity250

Rate-

Amount -

III. Sprinkling of water with 5000 Litres capacity tankers once in a day for 600 days (excluding rainy days)

Quantity300

Rate-

Amount -

Cap Bill No. 1.6 Operation and maintainance for Seven Years including two years Defective Liability Period

Quantity-

Rate-

Amount -

A) PERSONAL

Quantity-

Rate-

Amount -

Personal required for operating Valves in distribution lines

Quantity-

Rate-

Amount -

Valve Operator/Turn Cocks

Quantity420

Rate-

Amount -

Helpers for Distribution

Quantity840

Rate-

Amount -

Hiring of Vehicle

Quantity84

Rate-

Amount -

Repairs to pumpsets & Water pipe lines ( for Five years )

Quantity-

Rate-

Amount -

i)Replacement of glands of sluice valves

Quantity85

Rate-

Amount -

II) Replacements of balls of Air valves

Quantity65

Rate-

Amount -

ii)Grease

Quantity35

Rate-

Amount -

iv) Gland Packing

Quantity25

Rate-

Amount -

LEAKAGES

Quantity-

Rate-

Amount -

Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged DI Pipe for 2 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete

Quantity-

Rate-

Amount -

450mm DI Pipes

Quantity1

Rate-

Amount -

350 mm DI Pipes

Quantity5

Rate-

Amount -

Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete

Quantity-

Rate-

Amount -

250 mm HDPE Pipes

Quantity6

Rate-

Amount -

200 mm HDPE Pipes

Quantity12

Rate-

Amount -

160 mm HDPE Pipes

Quantity35

Rate-

Amount -

110 mm HDPE Pipes

Quantity40

Rate-

Amount -

Providing qualified diploma personal with minimum 2 Years of experience in Computers/ bulk flow meters and instruments maintainence etc. The member task is to maintain the system , including daily routine checks of all field instruments etc as directed by the departmental officers ( 2 techinican x 366 days x 7 years = 5124 days ) inc ESI, PF and other statutory levies as directed by the departmental officers

Quantity5124

Rate-

Amount -

Service Charge for bill generations , collections and maintainence for 11005 consumers x 12 months x 7 years = 924420 . This item includes cost of consumables .

Quantity670908

Rate-

Amount -

Providing for Implementation of Environmental Management Plan in the estimate

Quantity-

Rate-

Amount -

Air Quality Monitoring (5 Monitoring stations) twice in a year at distribution network).

Quantity10

Rate-

Amount -

Noise level Monitoring ( 5 Monitoring stations) twice in a year distribution network.

Quantity10

Rate-

Amount -

Water Quality Monitoring ( 6 Monitoring Locations) twice in a year at distribution network.

Quantity14

Rate-

Amount -

PALACOLE MUNICIPALITY

Quantity-

Rate-

Amount -

Cap Bill No: 8.1 Providing Distribution Network

Quantity-

Rate-

Amount -

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trenches -Manual means

Quantity10

Rate-

Amount -

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts,pipeline trenches upto 3.00m depth -Mechanical means

Quantity10

Rate-

Amount -

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts,pipeline trenches upto 3.00m depth Ordinary rock (not requiring blasting) Manual means 5%

Quantity1500

Rate-

Amount -

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts,pipeline trenches upto 3.00m depth Ordinary rock (not requiring blasting) Mechanical Means Upto 3 m depth 5%

Quantity12

Rate-

Amount -

Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Quantity1

Rate-

Amount -

Manufacture, supply and delivery of PE 100-PN 6 HDPE pipes confirming to IS 4984-1995 including transportation to work spot, stacking including all taxes etc. complete as per S.S

Quantity-

Rate-

Amount -

110mm dia.

Quantity1

Rate-

Amount -

160mm dia.

Quantity1

Rate-

Amount -

200mm dia.

Quantity1

Rate-

Amount -

225mm dia.

Quantity1

Rate-

Amount -

250mm OD

Quantity1

Rate-

Amount -

280mm dia.

Quantity1

Rate-

Amount -

315mm OD

Quantity1

Rate-

Amount -

355mm OD

Quantity1

Rate-

Amount -

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.